Automotive Jacks & Stands
Showing 37–72 of 146 results
-
Garage JacksTQB BRANDS Air Jack/Support Stand 10,000kg
This Borum “Industrial Quality” heavy-duty 10,000kg Air Jack/Support Stand runs entirely on compressed air. Air acts straight onto the piston to raise the load, and you control it with a simple UP/DOWN air valve. It’s a reinforced pin-style jack and stand built to take heavy loads up to 10,000kg, which makes it ideal for serviciing trucks, buses, farm gear and earthmoving equipment. It adjusts to suit the job, with a 444mm minimum height (536mm once the locking pins are in), 292mm of lift, and up to 1298mm using the extension tube.
To reach the full 10,000kg it needs a 200psi air supply. Anything less lifts a lighter load.
It’s built from high-grade steel and runs a sealed piston-and-cylinder setup. The piston and ram are hardened, treated and polished, so they stand up to heavy, repeat use.
Once it’s up at the right height, the load locks onto the steel pins, so it isn’t sitting on air pressure alone. The manual is firm on this: pin the post and exhaust the air before anyone works on, under or around the load. A safety valve and an exhaust silencer are built into the air circuit.
The whole unit is built for hard industrial use. A rugged steel frame is finished in lead-free paint across every surface to handle long-term wear and help keep rust at bay. That finish also shrugs off oil, grease and dirt, so it wipes clean in seconds.
Built with the best components from the highest grades of rugged steel, to the wear-resistant advanced technology sealing rings and a heavy duty hydraulic pump that’s filled with industrial grade high/low temperature-resistant hydraulic oil.
Features:
- Runs entirely on compressed air, acting straight onto the piston
- Simple UP/DOWN air valve to raise and lower
- Full 10,000kg lift needs a 200psi air supply; lower pressure lifts less
- Doubles as a pin-style support stand, so the load locks onto the pins
- Reinforced industrial design with support bracing
- Solid heavy-duty steel construction
- Hardened piston and ram, treated and polished
- Sealing rings on the piston and cylinder
- Built-in safety valve
- Exhaust silencer
- Height adjusts on locking pins, with an extension tube and height adaptors
- Lead-free paint to resist wear and help prevent rust
- Oil, grease and dirt resistant finish that wipes clean
Specifications:
- Safe Working Capacity: 10,000kg
- Minimum Height: 444mm
- Minimum Height With Locking Pins In Place: 536mm
- Maximum Height: 1298mm
- Hydraulic Lift: 292mm
- Base Diameter: 339mm
- Saddle Dimensions (ID): 100L x 100W x 29H mm
- Air Supply Pressure: 200psi (Required for full 10,000kg; lower pressure lifts less)
- Nett Weight: 79kg
- Crate: 640(L) x 390(W) x 590(H)mm
- Gross Weight: 91kg
Intended Use
Made for professional heavy-duty work across trucks, buses, agricultural, earthmoving, mining, rail and fleet maintenance. Anywhere you need to lift, support and lower big loads.
(0 reviews) -
Bottle JacksTQB BRANDS Air/Hydraulic Bottle Jack 20,000kg
This heavy duty 20,000kg Borum Industrial Air/Manual Bottle Jack packs a big punch, providing enough lifting power for use with farm vehicles, heavy-duty machinery, industrial construction equipment and more. The 2 piece removable handle is long enough to lift the load with ease and also helps to position the jack. Use this workhorse with a 90-120psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need, or operate it manually for normal operation just about anywhere.
Our Borum Industrial Quality Air/Manual Bottle Jacks are designed to operate either manually or pneumatically. The manual function allows for normal operation anywhere, even without an air supply.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Manufactured of superior-grade steel to exacting standards for quality and durability
- Industrial quality hydraulic cylinder unit operates at lower oil pressure to raise load, reduce wear and extend service life
- Precision machined, chrome plated and polished piston-ram
- CNC machined ports and threads
- Built-in hydraulic by-pass protection against over pumping damage
- Versatile “quick connector” design for easy removal of air hose for compact storage or remote operation
- Compact yet powerful Industrial Quality Air Turbo Motor
- Lead-free paint is applied to ensure a long-lasting finish and prevent corrosion
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- Thick welded base for heavy duty use & longevity
Specifications:
- Safe Working Capacity: 20,000kg
- Minimum Height: 263mm
- Maximum Height: 503mm
- Hydraulic Lift: 160mm
- Adjustable Height: 80mm
- Base Area: 200 x 152mm
- Operating Air Pressure: 90-120psi
- Air Inlet Fitting: 1/4″ x 18NPT
- Nett Weight: 16.5kg
- Carton: 280 x 200 x 280mm
- Gross Weight: 17kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Air/Hydraulic Bottle Jack 30,000kg
This heavy duty 30,000kg Borum Industrial Air/Manual Bottle Jack packs a big punch, providing enough lifting power for use with farm vehicles, heavy-duty machinery, industrial construction equipment and more. The 2 piece removable handle is long enough to lift the load with ease and also helps to position the jack. Use this workhorse with a 90-120psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need, or operate it manually for normal operation just about anywhere.
Our Borum Industrial Quality Air/Manual Bottle Jacks are designed to operate either manually or pneumatically. The manual function allows for normal operation anywhere, even without an air supply.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Manufactured of superior-grade steel to exacting standards for quality and durability
- Industrial quality hydraulic cylinder unit operates at lower oil pressure to raise load, reduce wear and extend service life
- Precision machined, chrome plated and polished piston-ram
- CNC machined ports and threads
- Built-in hydraulic by-pass protection against over pumping damage
- Versatile “quick connector” design for easy removal of air hose for compact storage or remote operation
- Compact yet powerful Industrial Quality Air Turbo Motor
- Lead-free paint is applied to ensure a long-lasting finish and prevent corrosion
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- Thick welded base for heavy duty use & longevity
Specifications:
- Safe Working Capacity: 30,000kg
- Minimum Height: 275mm
- Maximum Height: 532mm
- Hydraulic Lift: 162mm
- Adjustable Height: 95mm
- Base Area: 229 x 180mm
- Jack Lifting Saddle Diameter: 57mm
- Operating Air Pressure: 90-120psi
- Air Inlet Fitting: 1/4″ x 18NPT
- Nett Weight: 25.3kg
- Carton: 290 x 180 x 300mm
- Gross Weight: 26kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Transmission LiftersTQB BRANDS Auxiliary Lifter 500kg
This 500kg capacity TradeQuip “Made for the Trade” Hydraulic Telescopic Auxiliary Lifter has a 4 prong mounting cradle suitable for partial temporary support of vehicle components. The foot-operated quick lift pump frees up operator’s hands when positioning for lift and the hand operated lowering mechanism provides safety with its extra slow lower control.
Not intended for supporting loads and not intended as a stand alone transmission lifter
Features
- Designed for partial temporary support of vehicle components during removal and installation of components
- Nylon wheels and full swivel ball bearing castors for easy movement
- High polished chrome-plated rams provides smooth operation to maximise its high reach that is lifted by the user-friendly hand release pedal
- 4 prong mounting cradle
- Included “cup” style saddle for smaller areas of work
- Unique hand release knob provides extra slow control safety when lowering
Specifications
- Safe Working Capacity: 500kg
- Minimum Height: 1175mm
- Maximum Height: 1985mm
- Cradle Size: 362 x 362mm
- Lift Pad Accessory: 107.5mm Dia
- Base Dimensions: 540 x 570mm
- Nett Weight: 35.5kg
- Crate: 1110 x 320 x 275mm
- Gross Weight: 37kg
Intended Use
Designed for partial temporary support of vehicle components during removal and installation of components. Not intended for supporting loads and not intended as a stand alone transmission lifter.
(0 reviews) -
Transmission LiftersTQB BRANDS Auxiliary Lifter Kit 500kg
This 500kg capacity TradeQuip “Made for the Trade” Hydraulic Telescopic Auxiliary Lifter kit is ideal for partial temporary support of vehicle components in a busy workshop. The foot-operated quick lift pump frees up operator’s hands when positioning for lift and the hand operated lowering mechanism provides safety with its extra slow lower control.
Not intended for supporting loads and not intended as a stand alone transmission lifter
Features
- Designed for partial temporary support of vehicle components during removal and installation of components
- Nylon wheels and full swivel ball bearing castors for easy movement
- High polished chrome-plated rams provides smooth operation to maximise its high reach that is lifted by the user-friendly hand release pedal
- 4 prong mounting cradle
- Included “cup” style lift pad for smaller areas of work
- Included adjustable fuel tank adaptor to provide extra stability
- Unique hand release knob provides extra slow control safety when lowering
Specifications
- Safe Working Capacity: 500kg
- Minimum Height: 1175mm
- Maximum Height: 1985mm
- Cradle Size: 362 x 362mm
- Lift Pad Accessory: 107.5mm Dia
- Fuel Tank Holder: 812 x 352mm
- Base Dimensions: 540 x 570mm
- Nett Weight: 35.3kg
- Crate: 1110 x 315 x 275mm
- Gross Weight: 52kg
Intended Use
Designed for partial temporary support of vehicle components during removal and installation of components. Not intended for supporting loads and not intended as a stand alone transmission lifter.
(0 reviews) -
Stands & RampsTQB BRANDS Auxiliary Stand 7,000kg
The BORUM Industrial Heavy Duty Auxiliary Stand is a reinforced pin style vehicle stand with a heavy duty design and support bracing system to sustain heavy vehicle loads up to 7,000kg. It’s adjustable to match the job with a 1255mm minimum lift height and 1905mm maximum lift height !! Featuring Heavy-Duty Industrial design, this tough stand is ideal for use under 2 post and 4 post vehicle lifts. With adjustable height increments, 3 choices of saddle attachments, and a stable tripod design, the feet (with base plates) securely hold this auxiliary stand in place when the spring loaded swivel castor wheels are under load. This heavy duty stand is mobile when needed and stable under load, so its a very handy peice of equipment when working under a vehicle lift. This tripod design ensures complete stability, even when your workshop floor is not perfectly flat.
Features
- Heavy duty design and support bracing system to sustain heavy ve
hicle loads - Manufactured from high-grade steel and built to exacting standards for quality and durability
- Fitted with spring loaded castor wheels to ensure easy movement around the workshop
- Fitted with spring loaded support beam
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
Specifications
- Safe Working Capacity: 7,000kg
- Maximum Height: 1905mm
- Minimum Height: 1295mm
- 3 saddle options: 90mm, 120mm, up to 150mmØ
- Adjustable Pin Heights: 8 (75mm increments)
- Distance between Caster wheels: 630mm (Centre wheel to centre wheel measurement)
- Nett Weight: 65kg
- Carton: 1130 x 370 x 320mm
- Weight: 68kg
Intended Use
To support and/or stabilise a vehicle that is raised by a 2or4 post hoist or in-ground lift. Should always be used in pairs.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) - Heavy duty design and support bracing system to sustain heavy ve
-
Bottle JacksTQB BRANDS Bottle Jack 10,000kg
This powerful, heavy-duty TradeQuip “Made for the Trade” Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base. Supplied with 500mm pump handle.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Unique cross-type forged release valve assures positive load control
- Overload protection Hydraulic system is protected from internal damage by a by-pass mechanism
Specifications
- Safe Working Capacity: 10,000kg
- Hydraulic Lift: 130mm
- Adjustable Screw Height: 65mm
- Minimum Height: 200mm
- Maximum Height: 395mm
- Base Area: 124 x 124mm
- Handle: 500 x 20mm
- Carton: 140 x 135 x 215mm (plus handle)
- Gross Weight: 6kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack 15,000kg
This powerful, heavy-duty TradeQuip Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base. Supplied with 500mm pump handle.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Unique cross-type forged release valve assures positive load control
- Overload protection
- Hydraulic system is protected from internal damage by a by-pass mechanism
- Meets ASNZS2693:1993 safety standards
Specifications
- Safe Working Capacity: 15,000kg
- Hydraulic Lift: 150mm
- Adjustable Screw Height: 60mm
- Minimum Height: 230mm
- Maximum Height: 440mm
- Base Area: 148 x 136mm
- Handle: 500 x 20mm
- Carton: 160 x 145 x 235mm (plus handle)
- Gross Weight: 9kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack 20,000kg
This powerful, heavy-duty TradeQuip “Made for the Trade” Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base. Supplied with 500mm pump handle.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Unique cross-type forged release valve assures positive load control
- Overload protection
- Hydraulic system is protected from internal damage by a by-pass mechanism
Specifications
- Safe Working Capacity: 20,000kg
- Hydraulic Lift: 160mm
- Adjustable Screw Height: 60mm
- Minimum Height: 240mm
- Maximum Height: 460mm
- Base Area: 167 x 156mm
- Handle: 500 x 20mm
- Carton: 175 x 165 x 255mm (plus handle)
- Gross Weight: 12kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Hydraulic 12,000kg
This TradeQuip “Made for the Trade” Air/ Hydraulic Bottle Jack is designed to operate pneumatically. The power of air makes it easy to lift farm vehicles, trucks, lawn mowers, heavy duty machinery, industrial construction equipment and more. With it’s low profile design this 12,000kg heavy-duty air/hydraulic bottle jack is the perfect choice for a wide variety of uses. Use this workhorse with a 110-125 PSI rated air pressure supply to lighten the load and provide the fast, strong lifting power you need. The 260–510mm lift range raises the load to the desired height and a knurled, heat-treated pad with screw height adjustment allows fine-tune of the jack from there.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Machined and polished cylinders with die-cut threads
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Unique cross-type forged release valve assures positive load control
- Built-in bypass protection prevents damage from over pumping
- Compact yet powerful Air Turbo motor
- Versatile “quick connector provides ‘quick & easy air connection
- Two piece pump handle
- Convenient welded carry handle
Specifications:
- Safe Working Capacity: 12,000kg
- Minimum Height: 260mm
- Maximum Height: 510mm
- Hydraulic Stroke: 170mm
- Screw Extension Height: 80mm
- Operating Air Pressure: 110-125psi
- Air Fitting: 1/4″
- Carton: 250x180x270mm
- Gross Weight: 12.75kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Hydraulic 20,000kg
Our TradeQuip “Made for the Trade” Air/Manual 20,000kg Bottle Jack is designed to operate either manually or pneumatically. The manual function allows for normal operation anywhere, even without an air supply. Ideal for onsite/offsite lifting of farm vehicles, heavy duty machinery, industrial construction equipment and more. The Air/Manual Bottle Jack is equipped with an hydraulic system and a mounted powerful manual pump. Used on light or heavy vehicles, they are compact, versatile and safe to use. Our TradeQuip “Made for the Trade” design includes a quality safety valve to prevent overloading and a larger base to provide high safety and greater stability. This Air/Manual Bottle Jack is fitted with a Professional Quality Air Turbo Motor designed to meet the demands of adverse climate conditions and extreme temperatures. This ‘Best Selling’ Jack is a favourite of the Qld and WA mine maintenance crews, due to it’s strong lifting power and long lasting wear characteristics.
This 20,000kg heavy-duty air/hydraulic bottle jack is the perfect choice for a wide variety of uses. The power of air makes it easy to lift farm vehicles, trucks, trailers, heavy equipment and other large loads! Use this workhorse with a 90-120 PSI rated air pressure supply to lighten the load and provide the fast, strong lifting power you need, or operate it manually for normal operation just about anywhere. The 265–430mm lift range raises the load to the desired height and a knurled, heat-treated pad with 100mm screw height adjustment allows you to fine-tune the jack from there.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Always consider the TradeQuip Air Turbo Motor Features:
- Best practise quality controlled manufacturing process
- CNC machined cast alloy piston and barrel
- Barrel is hardness rated opposed to other mild steel variations
- Piston & Barrel combination present longlife wear characteristics similar to an engine crank and bearing
- Duro70 rated nitrile O’rings (best for air tool applications) provide good elasticity and friction rating
- Results in longer duty cycle over adverse Australian climate and temperature ranges
- Superior lithium grease lubrication is less prone to drying or flushing out from wet ,dry, hot or cold air supplies
- Lithium grease re-emulsifies when a few drops of air tool oil or 32 grade hydraulic oil is regularly added
Specifications
- Safe Working Capacity: 20,000kg
- Minimum Height: 265mm
- Maximum Height: 510mm
- Hydraulic Lift: 170mm (265mm to 435mm)
- Adjustable Height: 75mmn (Maximum height 510mm)
- Base Area: 224x134mm
- Work Pressure: 90-120psi
- Carton: 290 x 200 x 290mm
- Weight: 16kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Hydraulic 20,000kg
This TQ Pro “Latest Applied Technologies” 20,000kg Air/Hydraulic Bottle Jack is constructed of superior grade steel and built to premium standards for quality and durability. The superior-quality, large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load. A built-in bypass device protects the hydraulic system from over-pumping damage. The sturdy and stable design features a welded base and cylinder to assure strength and eliminate leaks.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features
- Using CNC technology, the frame is constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability
- Premium quality large diameter hydraulic steel cylinder with precision tolerances
- Piston-ram is treated and polished to minimise wear and extend service life
- High capability premium quality seal system efficiently protects internal hydraulics keeping it free from contaminants
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish
- Paint is oil, grease and dirt-resistant for easy cleanup
- Thick Base Design
The thick base design is to provide the firmest footprint reducing flex. This substantially increases the life of the hydraulic ram under the toughest lifting and lowering circumstances.
Welded Reservoir
A welded reservoir instead of the screw base results in a substantial increase in durability. With the completely sealed hydraulic system, wear and tear and internal contamination is dramatically reduced.
Specifications
- Safe Working Capacity: 20,000kg
- Maximum Height: 525mm
- Minimum Height: 261.5
- Hydraulic Lift: 156mm
- Adjustable Lift: 95mm
- Operating Air Pressure: 110-125psiAir Inlet Fitting: 1/4″
- Base Dimensions: 230 x 150 x 30mm
- Carton: 270 x 240 x 290mm
- Nett Weight: 19kg
- Gross Weight: 22kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional specialist use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Hydraulic 30,000kg
This TQ Pro “Latest Applied Technologies” 30,000kg Air/Hydraulic Bottle Jack is constructed of superior grade steel and built to premium standards for quality and durability. The premium-quality, large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load. A built-in bypass device protects the hydraulic system from over-pumping damage. The sturdy and stable design features a welded base and cylinder to assure strength and eliminate leaks.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features
- Using CNC technology, the frame is constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability
- Premium quality large diameter hydraulic steel cylinder with precision tolerances
- Piston-ram is treated and polished to minimise wear and extend service life
- High capability premium quality seal system efficiently protects internal hydraulics keeping it free from contaminants
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish
- Paint is oil, grease and dirt-resistant for easy cleanup
Thick Base Design
The thick base design is to provide the firmest footprint reducing flex. This substantially increases the life of the hydraulic ram under the toughest lifting and lowering circumstances.
Welded Reservoir
A welded reservoir instead of the screw base results in a substantial increase in durability. With the completely sealed hydraulic system, wear and tear and internal contamination is dramatically reduced.
Specifications
- Safe Working Capacity: 30,000kg
- Maximum Height: 533mm
- Minimum Height: 279.5mm
- Hydraulic Lift: 155mm
- Adjustable Screw Height: 95mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″
- Base Dimensions: 250 x 180 x 40mm
- Carton: 270 x 240 x 290mm
- Nett Weight: 29kg
- Gross Weight: 29.5kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional specialist use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting is required.
(0 reviews) -
Bottle JacksTQB BRANDS Bottle Jack Air/Hydraulic 35,000kg
This powerful heavy duty 35,000kg Borum Industrial Air/Hydraulic Bottle Jack packs a big punch, providing enough lifting power for use with farm vehicles, heavy-duty machinery, industrial construction equipment and more. The 2 piece removable handle is long enough to lift the load with ease and also helps to position the jack. Use this workhorse with a 110-125psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need, or operate it manually for normal operation just about anywhere.
Our Borum Industrial Quality Air/Manual Bottle Jacks are designed to operate either manually or pneumatically. The manual function allows for normal operation anywhere, even without an air supply.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
(Previous models include product code/s; 35TABJ)
Features:
- Manufactured of superior-grade steel to exacting standards for quality and durability
- Industrial quality hydraulic cylinder unit operates at lower oil pressure to raise load, reduce wear and extend service life
- Precision machined, chrome plated and polished piston-ram
- CNC machined ports and threads
- Built-in hydraulic by-pass protection against over pumping damage
- Versatile “quick connector” design for easy removal of air hose for compact storage or remote operation
- Compact yet powerful Industrial Quality Air Turbo Motor
- Lead-free paint is applied to ensure a long-lasting finish and prevent corrosion
- Paint finish is oil, grease and dirt-resistant for easy cleanup
Specifications:
- Safe Working Capacity: 35,000kg
- Minimum Height: 264mm
- Maximum Height: 414mm
- Hydraulic Stroke: 150mm
- Base Area: 210x280mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″ x 18NPT
- Nett Weight: 29kg
- Carton: 265 x 230 x 300mm
- Gross Weight: 30kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews)
