KINCROME Dual Stage Transmission Jack 1,000kg
Specifications
| Brand | KINCROME |
| Base Dimensions | 650 x 650mm |
| First Stage Ram Stroke | 545mm |
| Height Lowered | 920mm |
| Height Raised | 1,905mm |
| Lift Height | 985mm |
| Max Capacity | 1,000kg |
| Saddle Size | 280 x 280 x 165mm |
| Saddle Tilt | 7-12° |
| Second Stage Ram Stroke | 490mm |
| Warranty | 2 Years |
| Material | Heavy Duty Steel |
| Length (mm) | 660 |
| Width (mm) | 660 |
| Height (mm) | 1905 |
| Weight (kg) | 74 |
Features
Related products
-
Transmission Jacks
KINCROME Adjustable Transmission Support 600kg
Specifications
Brand KINCROME Front To Rear Tilt 40 Rated Capacity 600kg Saddle Shaft Insert 30mm Saddle Size 200 x 340mm Warranty 2 Years Material Steel Length (mm) 640 Width (mm) 640 Height (mm) 1100 Weight (kg) 10 Features
Designed to safely support the gear box on removal and installationAdjustable saddle gives fine adjustment when aligning the gearbox to the engineSuitable for any vertical transmission jack with a 30mm diameter shaftAllows for One Man operationSafety Chains and Shackles IncludedRated at 600kg Max Capacity40° front to rear tilt(0 reviews) -
Transmission Lifters
TRADEQUIP Transmission Lifter 4X4/SUV/Light Commercial
This TradeQuip “Made for the Trade” 1,000kg Transmission Lifter is designed for passenger car, 4WD & Light commercial transmission installation and removal. It features a universal mounting cradle that provides a 4 way tilt range and a manually operated hydraulic system with smooth hydraulic lift and descent. The hydraulic system also includes a bypass system to prevent over extension and accidental overloading. The sturdy and stable design offers safety and security when removing and installing large and heavy transmissions.
Features:
- Designed for Passenger Car, 4WD & Light Commercial Transmissions
- Base frame constructed of high-grade steel
- 2-Stage hydraulic lift
- High quality large diameter hydraulic cylinder
- Universal 4 way tilt cradle with safety chains
- Lead-free paint finish for a long-lasting finish
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- Heavy-duty steel swivel castors
Specifications:
- Safe Working Capacity: RWD/FWD/AWD/4X4 GVM <3,200KG


- Rated Capacity: 1000kg
- Platform Lift Range: 950-1930mm (Excludes 60mm upright support brackets)
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Crate: 840 x 570 x 400mm
- Nett Weight: 73.7kg
- Gross Weight: 82.3kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are raised by an in-ground or above-ground lift.
(0 reviews) -
Transmission Lifters
BORUM Clutch Jack – 130kg
The Borum Industrial 130kg Hydraulic Clutch Jack is perfect for earthmoving equipment and truck clutch and/or flywheel installation and removal. It features two fully adjustable splines, smooth, manually operated hydraulic lifting and lowering and four 360° swivel caster wheels for better load positioning. The ergonomic multi position rotating jacking handle makes overall maneuverability simple and efficient in a busy workshop.
Features
- Designed for lifting, lowering & installing/removing heavy vehicle clutch/flywheel assembles
- Frame is constructed of industrial-grade steel and built to exacting standards for quality and durability
- High quality hydraulic steel jacking cylinder results in low physical effort oil needed to lift load
- Industrial strength hydraulic system is protected from overload damage
- Filled with industrial grade 32 hydraulic fluid
- Rugged heavy industrial wheels and full swivel ball bearing castors
- User-friendly rotating pumping handle for maximum multi-directional operation
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Two 10-tooth alignment splines included which conveniently stores on chassis
Specifications
- Safe Working Capacity: 130kg
- Minimum Height: 288mm
- Maximum Height: 980mm
- Chassis Dimensions: 1041 x 609mm
- 1 x 2″ Alignment Spline Included (10 Tooth)
- 1 x 1-3/4″ Alignment Spline Included (10 Tooth)
- Carton: 1070 x 710 x 220mm
- Gross Weight: 62kg
Intended Use
This clutch jack is designed to remove, install & transport (in the lowered position) 14″ and 15-1/2″ single and double disk clutches and/or flywheel assemblies on & off vehicles
(0 reviews) -
Transmission Lifters
TRADEQUIP Transmission Lifter 4×4/SUV/Light Commercial
This professional TradeQuip “Made for the Trade” 1,000kg Hydraulic Low Profile Transmission Jack is perfect for transmission installation and removal under ramps. Features include smooth, manually operated hydraulic lifting and lowering and a 360° rotating handle for better load positioning. The universal lifting platform provides a wide forward, backward tilt range and side to side lateral adjustment. This transmission jack makes transmission removal and replacement easy and safe. Featuring durable rear swivel castors for mobility, this tough transmission jack is also formed and welded with extra strong steel plates for ultimate durability. (Previous models include product code/s; 1000KGTROTJ, 2081T)
Features
- The adjustable lifting platform can be tilted forward, backward for alignment of transmission bolt patterns and pins
- Lateral lifting platform adjustment improves efficiency
- Hydraulic system is protected from overload damage
- Safety load-restraining chain is vital for raising and lowering safety
- Four (4) swivel castors allow easy movement and positioning of transmission jack
- Rugged heavy duty steel wheels with full swivel ball bearing castors
- User-friendly 360° rotating pumping handle for maximum multi-directional operation
Specifications

- Safe Working Capacity: RWD/FWD/AWD/4X4 GVM <3,500kg

- Rated Capacity: 1,000kg
- Maximum Height: 725mm
- Minimum Height: 205mm
- Lifting Platform Size: 340x200mm
- Tilt Forward: 70°
- Tilt Backward: 15°
- Lifting Platform Lateral Adjustment: 90mm

- Chassis: 850(L)x490(W)x305(H)mm
- Nett Weight: 54kg
- Carton 910 x 520 x 260mm
- Gross Weight: 59.5kg
Intended Use
For professional removal and installation of passenger car, 4WD and light commercial transmissions or differentials.
(0 reviews)




