KINCROME Air/Hydraulic Truck Jack 22,000kg
Related products
-
Garage JacksTQB BRANDS Truck Jack Air Actuated Trade 22,000kg
This TradeQuip “Made for the Trade” pneumatic heavy-duty 22,000kg Air Actuated Hydraulic Quick Lift Truck Jack has a powerful air motor to lift heavy loads. The efficient quick lift system is designed to ensure the lifting ram comes in contact with the load faster. The compact design easily fits between dual tandem axles. Ideal for lifting axles, farm vehicles, heavy-duty machinery, industrial equipment and more. Includes height adaptors.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
(Previous models include product code/s; 2003T)
Features:
- Professional quality rugged steel construction
- Wear-resistant quality sealing O-rings
- Strong hydraulic pump
- Temperature-resistant hydraulic oil
- Treated and polished piston and ram
- Built-in bypass hydraulic safety overload system
- Compact design easily fits between dual tandem axles
- Quick Lift lifting ram comes in contact with the load faster
- Convenient & efficient height adaptors
- 3-position pumping handle
- High quality lead-free paint ensures long-lasting wear and prevents rust
- Oil, grease and dirt-resistant finish for easy cleanup
Specifications:
- Safe Working Capacity: 22,000kg
- Lift Range: 225-552mm
- Hydraulic Lift: 124mm
- Adjustable Height: 103mm
- Air Supply: 110-125psi
- Adaptor Sizes: 21mm, 60mm 100mm
- Handle Length: 1160mm
- Chassis: 560L x 230H x 320W mm
- Wheel Diameter: 200mm
- Nett Weight: 45kg
- Carton: 675(L) x 345(W) x 250(H)mm
- Gross Weight: 47kg
Note: Use only high quality hydraulic fluid eg.ISO68Wear-resistant quality sealing O-rings
NOTE: This Garage Jack must only be used on hard level surfaces and be free to roll during lifting and lowering. DO NOT get under a vehicle that is only supported by this Garage Jack. ALWAYS USE JACK STANDS!
WARNING: Always ensure the vehicle wheels are chocked before lifting. This Garage Jack is a lifting and lowering device only and is designed for lifting part of the total vehicle. Do not move or dolly the vehicle whilst the vehicle is on this Garage Jack.
Intended Use
For professional medium duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Garage JacksTQB BRANDS Truck Jack Air Actuated 50,000kg
This “Borum Industrial” pneumatic heavy-duty 50,000kg Air Hydraulic Truck Jack has a powerful air motor to lift heavy loads. The efficient quick lift system is designed to ensure the lifting ram comes in contact with the load faster. The compact design easily fits between dual tandem axles. Ideal for lifting axles, farm vehicles, heavy-duty machinery, industrial equipment and more. This Borum Air/Hydraulic Truck Jack utilises compressed air to activate a booster cylinder, to move hydraulic oil within the cylinder up & down. It adopts a industrial hydraulic design combination of compressed air and hydraulic pressure, to create, strong jacking capacity and low lifting clearance in one jack. The two wheel floor support design lets you really get under your loads with a 287mm minimum height. Designed to lift buses and other large, low-clearance vehicles with maximum stability. Includes height adaptors.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features:
- Professional quality rugged steel construction
- Wear-resistant quality sealing O-rings
- Strong hydraulic pump
- Temperature-resistant hydraulic oil
- Treated and polished piston and ram
- Built-in bypass hydraulic safety overload system
- Compact design easily fits between dual tandem axles
- Quick Lift lifting ram comes in contact with the load faster
- Convenient & efficient height adaptors
- 3-position pumping handle
- High quality lead-free paint ensures long-lasting wear and prevents rust
- Oil, grease and dirt-resistant finish for easy cleanup
Specifications:
- Safe Working Capacity: 50,000kg
- Lift Range: 287-650mm
- Hydraulic Lift: 153mm
- Screw Height: 110mm
- Adaptors: 20, 60, 100mm
- Operating Air Pressure: 110-125psi
- Handle Length: 1230mm
- Chassis: 525(L) x 288(H) x 325(W)mm
- Nett Weight: 57kg
- Carton: 680 x 360 x 310mm
- Gross Weight: 58kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Garage JacksTQB BRANDS Air Jack/Support Stand 10,000kg
This Borum “Industrial Quality” heavy-duty 10,000kg Air Jack/Support Stand runs entirely on compressed air. Air acts straight onto the piston to raise the load, and you control it with a simple UP/DOWN air valve. It’s a reinforced pin-style jack and stand built to take heavy loads up to 10,000kg, which makes it ideal for serviciing trucks, buses, farm gear and earthmoving equipment. It adjusts to suit the job, with a 444mm minimum height (536mm once the locking pins are in), 292mm of lift, and up to 1298mm using the extension tube.
To reach the full 10,000kg it needs a 200psi air supply. Anything less lifts a lighter load.
It’s built from high-grade steel and runs a sealed piston-and-cylinder setup. The piston and ram are hardened, treated and polished, so they stand up to heavy, repeat use.
Once it’s up at the right height, the load locks onto the steel pins, so it isn’t sitting on air pressure alone. The manual is firm on this: pin the post and exhaust the air before anyone works on, under or around the load. A safety valve and an exhaust silencer are built into the air circuit.
The whole unit is built for hard industrial use. A rugged steel frame is finished in lead-free paint across every surface to handle long-term wear and help keep rust at bay. That finish also shrugs off oil, grease and dirt, so it wipes clean in seconds.
Built with the best components from the highest grades of rugged steel, to the wear-resistant advanced technology sealing rings and a heavy duty hydraulic pump that’s filled with industrial grade high/low temperature-resistant hydraulic oil.
Features:
- Runs entirely on compressed air, acting straight onto the piston
- Simple UP/DOWN air valve to raise and lower
- Full 10,000kg lift needs a 200psi air supply; lower pressure lifts less
- Doubles as a pin-style support stand, so the load locks onto the pins
- Reinforced industrial design with support bracing
- Solid heavy-duty steel construction
- Hardened piston and ram, treated and polished
- Sealing rings on the piston and cylinder
- Built-in safety valve
- Exhaust silencer
- Height adjusts on locking pins, with an extension tube and height adaptors
- Lead-free paint to resist wear and help prevent rust
- Oil, grease and dirt resistant finish that wipes clean
Specifications:
- Safe Working Capacity: 10,000kg
- Minimum Height: 444mm
- Minimum Height With Locking Pins In Place: 536mm
- Maximum Height: 1298mm
- Hydraulic Lift: 292mm
- Base Diameter: 339mm
- Saddle Dimensions (ID): 100L x 100W x 29H mm
- Air Supply Pressure: 200psi (Required for full 10,000kg; lower pressure lifts less)
- Nett Weight: 79kg
- Crate: 640(L) x 390(W) x 590(H)mm
- Gross Weight: 91kg
Intended Use
Made for professional heavy-duty work across trucks, buses, agricultural, earthmoving, mining, rail and fleet maintenance. Anywhere you need to lift, support and lower big loads.
(0 reviews) -
Garage JacksTQB BRANDS Truck Jack Air Actuated Commercial 22,000kg
This Borum “Industrial Quality” pneumatic heavy-duty 22,000kg Air Actuated Hydraulic Quick Lift Truck Jack has a powerful super duty air motor to easily and reliably lift heavy vehicle loads. This super-tough Truck Jack delivers enough air/hydraulic power to lift up to 22,000kg and is ideal for servicing trucks and farm equipment. Other features include 200mm diameter wheels for easy maneuverability, four saddle adaptors and a cast iron base with formed steel housing for added durability.
Built with the best components from the highest grades of rugged steel, to the wear-resistant advanced technology sealing rings and a heavy duty hydraulic pump that’s filled with industrial grade high/low temperature-resistant hydraulic oil.
The alloy hardened piston-ram is treated and polished to resist thinning over time and uses an advanced Y-type polyurethane sealing ring system that keeps the jack solidly raised in the desired position, preventing the load from falling slowly. Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
This 22,000kg Truck Jack is designed for industrial strength durability. The rugged super-grade steel frame is teamed with an industrial quality lead-free paint finish that covers the entire surface to ensure long-lasting wear and help prevent rust. The paint is also oil, grease and dirt-resistant for easy cleanup. (Previous models include product code/s; BPROAJ22T, BTJ22TA)
Features:
-
Solid heavy duty construction for superior performance
- Industry benchmark for harsh workplace conditions
- Hardened alloy plated ram ensures heavy duty performance
- Advanced hydraulic seal technology
- Fast motion super duty air pump
- Industry benchmark for heavy duty workplace conditions
- Advanced technology sealing rings
- High-low temperature-resistant hydraulic oil
- Treated and polished piston and ram
- Built-in bypass hydraulic safety overload system
- Convenient & efficient height adaptors
- 3-position pumping handle
- High quality lead-free paint ensures long-lasting wear and prevents rust
- Oil, grease and dirt-resistant finish for easy cleanup
Specifications:
- Safe Working Capacity: 22,000kg
- Lift Range: 210-525mm
- Hydraulic Lift: 120mm
- Adjustable Height: 105mm
- Handle Length: 1075mm
- Air Supply: 100-120psi
- Wheel Diameter: 175mm
- Interchangeable Saddle Adaptors: 20 50 100mm
- Chassis: 570(L) x 215(H) x 310(W)mm
- Nett Weight: 48kg
- Carton: 660(L) x 360(W) x 280(H)mm
- Gross Weight: 50kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -