Cranes & Lifting Devices

Specifications

• Safe Working Capacity: 1,200kg (AS1418.5 approved)
• Adjustable Boom: 250kg, 500kg, 750kg & 1200kg
• Lifting Ram Capacity: 8,000kg >  Available as Spare Part: Product Code: 2008
• Stabiliser Arms Clearance: 195mm
• Dimensions: (Arms Ext): 2300(H) x 960(W) x 550(D)mm
• See pic for boom length, height and capacity
• Nett Weight: 85kg
• Carton 1 of 2 : 1440 x 300 x 160mm (Weight: 59kg)
• Carton 2 of 2 : 850 x 580 x 90mm (Weight: 32kg)

Intended Use

For regular professional use, to raise and/or lower passenger car engines and transmissions during service or repair work.

The perfect accessory for our engine cranes, this TradeQuip “Made for the Trade” Engine Leveller reduces the hazards and hassles out of balancing heavy, awkward loads and helps protect engines, transmissions and vehicle damage. Perfect for removing and installing engines, it easily adjusts the angle of the engine simply by turning the swivel handle and is compatible with most good brands of engine cranes.The load leveller includes four 300mm chains with support brackets for increased load security and safety.

Features

• Easy to use, just crank to level
• Tilts forward and backward for easy motor mount alignment
• Heavy duty steel I-beam construction
• Balances engine/transmission for easier installation or removal
• Constructed of high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• Easily adapts to different engine cranes and improves the install/removal operation
• 4-point mounting system provides maximum control
• Worm drive shaft rotates with a built-in swivel handle for easy balancing
• 3 adjustable chain assembly holes for different engine sizes

Specifications

• Safe Working Capacity: 680kg
• Chain Length: 300mm
• Chain Anchor Positions: 3
• Engine Mount Positions: 4
• Working Range: 250mm, 275mm, 310mm
• Weight: 6kg
• Carton: 465 x 190 x 60mm

Intended Use

For regular professional use, to tilt engines and/or transmissions whilst raising and/or lowering passenger car engines and transmissions with an engine crane or hoist.

This twin piston TradeQuip “Made for the Trade” 8,000kg Long Hydraulic Ram is the replacement hydraulic ram for use on TradeQuip 1001T hydraulic engine cranes. Mounts directly onto the engine crane and features a slow release function while providing a long 630–1135mm lift range. High quality large diameter twin cylinder hydraulic pump unit results in Quick Lift action, lower oil pressure needed to raise the load, which reduces wear and extends service life. 100% factory vertical load tested for reliability and safety. For vertical use only.

Replacement long hydraulic ram to suit TradeQuip 1001T Engine Crane.

Features

• Double action “Quick Lift” design for quick positioning without load
• Built in ‘Overload Protection’
• Constructed of high grade steel to exacting specifications for strength and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to prevent rust
• Paint is oil, grease and dirt resistant
• Factory filled with high quality hydraulic jack oil, which offers better corrosion resistance and high/low temperature flexibility
• Includes lift handle for easy operation

Specifications

• Safe Working Capacity: 8,000kg
• Minimum Length: 630mm
• Maximum Length: 1135mm
• Ram Pin Hole: 16mm dia.  35mm Outside Ram
• Ram Diameter: 80mm
• Clevis Base Pin Hole: 16mm dia
• Clevis Base:  25mm Inside  –  45mm Outside
• Base Width: 129mm
• Nett Weight: 10.5kg
• Carton: 700 x 170 x 150mm
• Gross Weight: 11.5kg

Intended Use

As a direct replacement for the hydraulic unit on a 1001T TradeQuip 1200kg Engine Crane only

The eQuipt “Designed to Deliver” steel Utility Crane effortlessly lifts items from the ground to ute/truck tray height, then rotates them into the cargo area. The telescopic boom design with manual hydraulic hand pump pivots the boom up and down and swivels 360° for maximum accessibility. Get extra lift where you need it most with this eQuipt Utility Crane that easily lifts loads to 900kg. The steel boom extends up to 1290mm and the base swivels to help you get the best angle when hoisting items onto your ute or truck bed. The pickup crane folds away when not in use.  (Previous models include product code/s; 2069T, 2079)

• Pre-drilled base plate makes mounting quick and easy
• Handles up to 400kg in extended mode and 900kg in retracted mode
• Includes chain hook with chain slot lock and one cable hook both with safety latch
• Base rotates 360 degrees
• Designed for vertical lifting only
• Not to be used for lifting personnel or overhead lifting
• All steel construction
• Boom stores over wheel well when not in use

Specifications

• Hydraulic Lifting Capacity: 400 – 900Kg
• Maximum Reach of Boom: 1290mm (400kg)   870mm (900kg)
• Maximum Height (hook height): 2300mm (400kg) 2000mm (900kg)
• Minimum Height:: 1425mm (from ute tray to boom pivot – excluding boom)
• Mounting Base:275 x 275mm
• Mounting Base Holes: 8 holes x 16mm (dia) x 110mm (centre-centre)
• Weight: 48kg
• Carton 1 of 2 : 1110 x 250 x 180mm
• Carton 2 of 2 :  340 x 330 x 320mm

Intended Use

To raise and/or lower loads from a raised height once mounted to a suitable mounting point capable of sustaining the combined load of the equipment and working piece.