KINCROME Adjustable Transmission Support 600kg
Specifications
| Brand | KINCROME |
| Front To Rear Tilt | 40 |
| Rated Capacity | 600kg |
| Saddle Shaft Insert | 30mm |
| Saddle Size | 200 x 340mm |
| Warranty | 2 Years |
| Material | Steel |
| Length (mm) | 640 |
| Width (mm) | 640 |
| Height (mm) | 1100 |
| Weight (kg) | 10 |
Features
Related products
-
Transmission Lifters
BORUM Clutch Jack – 130kg
The Borum Industrial 130kg Hydraulic Clutch Jack is perfect for earthmoving equipment and truck clutch and/or flywheel installation and removal. It features two fully adjustable splines, smooth, manually operated hydraulic lifting and lowering and four 360° swivel caster wheels for better load positioning. The ergonomic multi position rotating jacking handle makes overall maneuverability simple and efficient in a busy workshop.
Features
- Designed for lifting, lowering & installing/removing heavy vehicle clutch/flywheel assembles
- Frame is constructed of industrial-grade steel and built to exacting standards for quality and durability
- High quality hydraulic steel jacking cylinder results in low physical effort oil needed to lift load
- Industrial strength hydraulic system is protected from overload damage
- Filled with industrial grade 32 hydraulic fluid
- Rugged heavy industrial wheels and full swivel ball bearing castors
- User-friendly rotating pumping handle for maximum multi-directional operation
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Two 10-tooth alignment splines included which conveniently stores on chassis
Specifications
- Safe Working Capacity: 130kg
- Minimum Height: 288mm
- Maximum Height: 980mm
- Chassis Dimensions: 1041 x 609mm
- 1 x 2″ Alignment Spline Included (10 Tooth)
- 1 x 1-3/4″ Alignment Spline Included (10 Tooth)
- Carton: 1070 x 710 x 220mm
- Gross Weight: 62kg
Intended Use
This clutch jack is designed to remove, install & transport (in the lowered position) 14″ and 15-1/2″ single and double disk clutches and/or flywheel assemblies on & off vehicles
(0 reviews) -
Transmission Lifters
TRADEQUIP Transmission Lifter 4X4/SUV/Light Commercial
This TradeQuip “Made for the Trade” 1,000kg Transmission Lifter is designed for passenger car, 4WD & Light commercial transmission installation and removal. It features a universal mounting cradle that provides a 4 way tilt range and a manually operated hydraulic system with smooth hydraulic lift and descent. The hydraulic system also includes a bypass system to prevent over extension and accidental overloading. The sturdy and stable design offers safety and security when removing and installing large and heavy transmissions.
Features:
- Designed for Passenger Car, 4WD & Light Commercial Transmissions
- Base frame constructed of high-grade steel
- 2-Stage hydraulic lift
- High quality large diameter hydraulic cylinder
- Universal 4 way tilt cradle with safety chains
- Lead-free paint finish for a long-lasting finish
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- Heavy-duty steel swivel castors
Specifications:
- Safe Working Capacity: RWD/FWD/AWD/4X4 GVM <3,200KG


- Rated Capacity: 1000kg
- Platform Lift Range: 950-1930mm (Excludes 60mm upright support brackets)
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Crate: 840 x 570 x 400mm
- Nett Weight: 73.7kg
- Gross Weight: 82.3kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are raised by an in-ground or above-ground lift.
(0 reviews) -
Transmission Lifters
TRADEQUIP Auxiliary Lifter Kit 500kg
This 500kg capacity TradeQuip “Made for the Trade” Hydraulic Telescopic Auxiliary Lifter kit is ideal for partial temporary support of vehicle components in a busy workshop. The foot-operated quick lift pump frees up operator’s hands when positioning for lift and the hand operated lowering mechanism provides safety with its extra slow lower control.
Not intended for supporting loads and not intended as a stand alone transmission lifter

Features
- Designed for partial temporary support of vehicle components during removal and installation of components
- Nylon wheels and full swivel ball bearing castors for easy movement
- High polished chrome-plated rams provides smooth operation to maximise its high reach that is lifted by the user-friendly hand release pedal
- 4 prong mounting cradle
- Included “cup” style lift pad for smaller areas of work
- Included adjustable fuel tank adaptor to provide extra stability
- Unique hand release knob provides extra slow control safety when lowering
Specifications
- Safe Working Capacity: 500kg
- Minimum Height: 1175mm
- Maximum Height: 1985mm
- Cradle Size: 362 x 362mm
- Lift Pad Accessory: 107.5mm Dia
- Fuel Tank Holder: 812 x 352mm
- Base Dimensions: 540 x 570mm
- Nett Weight: 35.3kg
- Crate: 1110 x 315 x 275mm
- Gross Weight: 52kg
Intended Use
Designed for partial temporary support of vehicle components during removal and installation of components. Not intended for supporting loads and not intended as a stand alone transmission lifter.
(0 reviews) -
Transmission Jacks
KINCROME Dual Stage Transmission Jack 1,000kg
Specifications
Brand KINCROME Base Dimensions 650 x 650mm First Stage Ram Stroke 545mm Height Lowered 920mm Height Raised 1,905mm Lift Height 985mm Max Capacity 1,000kg Saddle Size 280 x 280 x 165mm Saddle Tilt 7-12° Second Stage Ram Stroke 490mm Warranty 2 Years Material Heavy Duty Steel Length (mm) 660 Width (mm) 660 Height (mm) 1905 Weight (kg) 74 Features
1,000kg working load limitDual stage transmission jackIndustrial workshop qualityTakes the hard work and danger out of transmission removals and installationsSuits FWD, RWD and 4WD light cars or trucksAdjustable transmission saddle and safety chainsSteering handle for effortless maneuverabilityWide 4-leg base gives ultimate stabilityHeavy duty cast iron swivel castors(0 reviews)




