Automotive Jacks & Stands
Showing 73–108 of 146 results
-
Bottle Jacks
TQ PRO Bottle Jack Air/Hydraulic 20,000kg
This TQ Pro “Latest Applied Technologies” 20,000kg Air/Hydraulic Bottle Jack is constructed of superior grade steel and built to premium standards for quality and durability. The superior-quality, large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load. A built-in bypass device protects the hydraulic system from over-pumping damage. The sturdy and stable design features a welded base and cylinder to assure strength and eliminate leaks.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features
- Using CNC technology, the frame is constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability
- Premium quality large diameter hydraulic steel cylinder with precision tolerances
- Piston-ram is treated and polished to minimise wear and extend service life
- High capability premium quality seal system efficiently protects internal hydraulics keeping it free from contaminants
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish
- Paint is oil, grease and dirt-resistant for easy cleanup
- Thick Base Design
The thick base design is to provide the firmest footprint reducing flex. This substantially increases the life of the hydraulic ram under the toughest lifting and lowering circumstances.
Welded Reservoir
A welded reservoir instead of the screw base results in a substantial increase in durability. With the completely sealed hydraulic system, wear and tear and internal contamination is dramatically reduced.
Specifications
- Safe Working Capacity: 20,000kg
- Maximum Height: 525mm
- Minimum Height: 261.5
- Hydraulic Lift: 156mm
- Adjustable Lift: 95mm
- Operating Air Pressure: 110-125psiAir Inlet Fitting: 1/4″
- Base Dimensions: 230 x 150 x 30mm
- Carton: 270 x 240 x 290mm
- Nett Weight: 19kg
- Gross Weight: 22kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional specialist use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting is required.
(0 reviews) -
Bottle Jacks
TQ PRO Bottle Jack Air/Hydraulic 30,000kg
This TQ Pro “Latest Applied Technologies” 30,000kg Air/Hydraulic Bottle Jack is constructed of superior grade steel and built to premium standards for quality and durability. The premium-quality, large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load. A built-in bypass device protects the hydraulic system from over-pumping damage. The sturdy and stable design features a welded base and cylinder to assure strength and eliminate leaks.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features
- Using CNC technology, the frame is constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability
- Premium quality large diameter hydraulic steel cylinder with precision tolerances
- Piston-ram is treated and polished to minimise wear and extend service life
- High capability premium quality seal system efficiently protects internal hydraulics keeping it free from contaminants
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish
- Paint is oil, grease and dirt-resistant for easy cleanup
Thick Base Design
The thick base design is to provide the firmest footprint reducing flex. This substantially increases the life of the hydraulic ram under the toughest lifting and lowering circumstances.
Welded Reservoir
A welded reservoir instead of the screw base results in a substantial increase in durability. With the completely sealed hydraulic system, wear and tear and internal contamination is dramatically reduced.
Specifications
- Safe Working Capacity: 30,000kg
- Maximum Height: 533mm
- Minimum Height: 279.5mm
- Hydraulic Lift: 155mm
- Adjustable Screw Height: 95mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″
- Base Dimensions: 250 x 180 x 40mm
- Carton: 270 x 240 x 290mm
- Nett Weight: 29kg
- Gross Weight: 29.5kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional specialist use on truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting is required.
(0 reviews) -
Bottle Jacks
TQ PRO Bottle Jack Squat Air/Hydraulic 20,000kg
This TQ Pro “Latest Applied Technologies” 20,000kg Air/Hydraulic Bottle Jack is constructed of superior grade steel and built to premium standards for quality and durability. The premium-quality, large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load. A built-in bypass device protects the hydraulic system from over-pumping damage. The sturdy and stable design features a welded base and cylinder to assure strength and eliminate leaks.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
(Previous models include product code/s; BSLAJ20)
Features
- Using CNC technology, the frame is constructed using superior-grade steel and built to premium TQ Pro standards for professional quality and durability
- Premium quality large diameter hydraulic steel cylinder with precision tolerances
- Piston-ram is treated and polished to minimise wear and extend service life
- High capability premium quality seal system efficiently protects internal hydraulics keeping it free from contaminants
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting premium finish
- Paint is oil, grease and dirt-resistant for easy cleanup
Thick Base Design
The thick base design is to provide the firmest footprint reducing flex. This substantially increases the life of the hydraulic ram under the toughest lifting and lowering circumstances.
Welded Reservoir
A welded reservoir instead of the screw base results in a substantial increase in durability. With the completely sealed hydraulic system, wear and tear and internal contamination is dramatically reduced.
Specifications
- Safe Working Capacity: 20,000kg
- Maximum Height: 330mm
- Minimum Height: 185mm
- Hydraulic Lift: 80mm
- Adjustable Height: 61mm
- Operating Air Pressure: 110-125psi
- Air Inlet Fitting: 1/4″
- Carton: 380 x 195 x 200mm
- Nett Weight: 16kg
- Gross Weight: 17kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For professional specialist use on truck, agriculture, construction, mining, automotive and trailer applications whenever clearance is limited or very low to the ground.
(0 reviews) -
Transmission Lifters
TQ PRO Transmission Lifter 4×4/SUV/Light Commercial
This TQ Pro “Latest Applied Technologies” 2-Stage 1,000kg Hydraulic Telescopic Transmission Lifter offers a wide range of versatility designed to help increase workshop productivity. Designed for use with passenger, SUV, 4×4 and Light Commercial with GVM of less than 3,500kg. This Transmission Lifter features a universal “oversized” lifting platform that provides a wide 4 way tilt range. The telescopic 2-stage design is ideal for reduced clearance lifts and the high speed foot pedal operation keeps hands free during lowering. The manually operated hydraulic system includes a bypass system to prevent over extension and accidental overloading. The sturdy and stable design features four premium quality ‘braked’ nylon swivel castors for easy maneuverability around the workshop.
Features
- Using CNC technology, the chassis and frame is constructed of superior-grade steel and built to premium standards for professional quality and durability
- High quality large diameter hydraulic steel cylinder with precision tolerances and in-ram bleeding and lubricating mechanism
- Piston-ram is precision machined, treated and polished to minimise wear and extend service life
- Globally sourced premium (twin) O rings with anti-dust ring, reduce wear and substantially increase durability
- Concealed double staged pump core
- Rapid lift without load
- Slow descent with load
- Overload safety valve
- Aviation grade hydraulic fluid
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting and durable finish
- Paint is oil, grease and dirt-resistant for easy cleanup
- Oversize mounting cradle provides a broad 4 way adjustment / tilt range
- Premium quality lockable nylon swivel castors
4 Way Tilting Cradle Offers The Perfect Mounting Angle
The oversize design of the lifting platform design provides a wide fore and aft tilt range to get the load in the perfect position.
Versatility And Portability To Match Your Needs
Positioning this transmission lifter is just a one-person job. The sturdy base includes four premium nylon castors that swivel a full 360°, adding effortless maneuverability. Once your transmission lifter is in place, the smooth, high speed hydraulic system makes easy work of lifting and lowering.
Use It Day In And Day Out
The TQ Pro Telescopic Transmission Lifter is the perfect choice for use with car and light truck transmissions. The base design makes this transmission lifter easy to move whilst maintaining stability under most vehicle hoists, and an oversized lifting platform increases contact area with the load for a sure hold on most transmissions.
Specifications
- Safe Working Capacity: RWD/FWD/AWD/4X4 GVM <3,500kg
- Rated Capacity: 1,000kg
- Platform Lift Range: 960-1905mm (Excludes 60mm upright support brackets)


- 2 Stage Lift Ram travel: 1st=490mm 2nd=510mm
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Base Dimensions: 610 x 740mm
- Nett Weight: 82.8kg
- Gross Weight: 91.4kg
- Crate: 840 x 570 x 400mm
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of 4WD and light commercial transmissions that are raised by an in-ground or above-ground lift. Not designed for supporting loads.
(0 reviews) -
Transmission Lifters
TQ PRO Transmission Lifter Passenger Vehicle
This TQ Pro “Latest Applied Technologies” 2-Stage Hydraulic Telescopic Transmission Lifter offers a wide range of versatility designed to help increase workshop productivity. Designed for lifting passenger car transmissions, the universal mounting lifting platform provides a wide four way tilt range and the wide base is enhanced by four premium nylon swivel castors for safer maneuvering around the workshop. The convenient rapid lift without load and slow descent with load is controlled via the foot operated pump and release valve to keep the mechanic’s hands free during use. The height and lifting platform adjustability of this telescopic Transmission Lifter makes it great for any transmission installation or removal. CNC technology, ensures the chassis and frame constructed of superior-grade steel is manufactured to exacting standards that meet TQ Pro expectations for professional quality and durability.
Features
- Designed for lifting & lowering passenger car transmissions
- Using CNC technology, the chassis and frame is constructed of superior-grade steel and built to exacting standards for professional quality and durability
- High quality large diameter hydraulic steel cylinder with precision tolerances and in-ram bleeding and lubricating mechanism
- Piston-ram is treated and polished to minimise wear and extend service life
- Globally sourced premium quality (doubled) O rings with anti-dust ring, reduce wear and substantially increase durability
- Concealed double staged pump core
- Rapid lift without load
- Slow descent with load
- Overload safety valve
- Aviation grade hydraulic fluid
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting and durable finish
- Paint is oil, grease and dirt-resistant for easy cleanup
- Oversize lifting platform provides a broad 4 way adjustment / tilt range
- Premium nylon swivel castors
4 Way Tilting Cradle Offers The Perfect Mounting Angle
The oversize design of the lifting platform design provides a wide fore and aft tilt range to get the load in the perfect position.
Versatility And Portability To Match Your Needs
Positioning this transmission lifter is just a one-person job. The sturdy base includes four premium nylon castors that swivel a full 360°, adding effortless maneuverability. Once your transmission lifter is in place, the smooth, high speed hydraulic system makes easy work of lifting and lowering.
Use It Day In And Day Out
The TQ Pro Telescopic Transmission Lifter is the perfect choice for lifting passenger car transmissions. The base design makes this transmission lifter easy to move whilst maintaining stability under most vehicle hoists, and an oversized cradle increases contact area with the load for a sure hold on most transmissions.
Specifications
- Safe Working Capacity: RWD/FWD/AWD GVM <2,500kg
- Rated Capacity: 500kg
- Platform Lift Range: 955-1960mm (Excludes 60mm upright support brackets)

- 2 Stage Lift Ram travel: 1st=490mm 2nd=510mm
- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Base Dimensions: 610 x 740mm
- Nett Weight: 78.9kg
- Crate: 840 x 570 x 400mm
- Gross Weight: 87.5kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of passenger vehicle transmissions that are raised by an in-ground or above-ground lift.
(0 reviews) -
Transmission Lifters
TQ PRO Transmission Saddle Upgrade
This TQ Pro “Latest Applied Technologies” Transmission Saddle Upgrade offers a wide range of versatility designed to help increase workshop productivity. This Transmission Lifter saddle upgrade features a universal “oversized” lifting platform that provides a wide 4 way tilt range. The sturdy and stable design features premium quality components for a longer working life.
Features
- The saddle frame is constructed of superior-grade steel and built to premium standards for professional quality and durability
- The enlarged threaded rods paired with cantilevered handles allow for faster adjustments over standard saddle design resulting in higher efficiencies
- The four ratcheting securing pins are easily and quickly adjustable making transmission lifting safer & more secure
- Two tie-down straps included to safely secure the transmission to the saddle
- Four rounded tie-down points and holes in securing pins allow for added level of customisation to secure the load
- One removable saddle pin allows for accommodation of longer gearboxes
- Compatible with and for use on selected TQB Brands Transmission Lifters Only.
Transmission Saddle Upgrade Only Available For Purchase To Upgrade Existing TQB Brands Transmission Lifter Saddle
TRANSMISSION LIFTER SHOWN IN IMAGES SOLD SEPARATELY
4 Way Tilting Cradle Offers The Perfect Mounting Angle
The oversize design of the lifting platform design provides a wide fore and aft tilt range to get the load in the perfect position.
Use It Day In And Day Out
The TQ Pro Transmission Lifter Saddle Upgrade is the perfect choice for use with a wide variety of vehicle transmissions. The design makes this transmission lifter saddle easy to make adjustments whilst maintaining stability under most vehicle hoists, and an oversized saddle platform increases contact area with the load for a sure hold on most transmissions.
Specifications
- Fits Following TQB Brands Models: PROTL1000; PROTL500; 2063T; 2022T
- Transmission Lifter Shown In Images Sold Separately
- Rated Maximum Capacity: 1,000kg (See your transmission lifter’s capacity)

- Lifting Platform Size: 160x145mm (475x465mm Max.)
- Forward Tilt: 11°
- Rearward Tilt: 11°
- Left Tilt: 9°
- Right Tilt: 11°
- Nett Weight: 19kg
- Carton: 360 x 240 x 370mm
- Gross Weight: 22kg
Intended Use
Designed for the removal, installation and transportation (in the lowered position) of vehicle transmissions that are raised by an in-ground or above-ground lift. Not designed for supporting loads.
(0 reviews) -
Garage Jacks
TQ PRO Truck Jack Air Actuated 20,000kg
The TQ Pro “Latest Technologies” Truck Jacks are made to TQB Brands specification using superior quality components that are built to exacting standards through CNC machining and Robotic Welding. The result is top industrial performance and reliability. TQ Pro “Latest Technologies” Truck Jacks are the perfect choice for a wide variety of uses. These Commercial Grade Jacks are carefully constructed from the highest grades of quality steel. The super strong hydraulic pump utilises wear-resistant American Made XTP double sealing ring technology. Only the finest quality of Hydraulic Oil is used that has been tested from -25°C – 60°C.
Use these quality truck jacks with a 145–175psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need. With several lifting options as well as included saddle adaptors…the wide range of TQ Pro “Latest Technologies” Truck Jacks will suit most desired applications from agriculture to mining, earth-moving to passenger transport as well as aviation and military.
This Air Actuated Truck Jack is designed for heavy duty commercial use and features a long reach “T” handle and large rubber wheels for smooth manoeuvring around the workshop. As always with TQ Pro “Latest Technologies”, safety is just as important as highest standard quality, so all TQ Pro “Latest Technologies” Truck Jacks have a built-in safety valve to prevent overloading and keep the operator safe. Additional safety feature includes a Self-Return lowering and lifting switch to ensure complete control during operation. With a minimum height of 215mm this jack is ideal for medium ground-clearance vehicles and a high lift maximum of 556mm (includes additional lifting saddles), this Air Actuated Truck Jack is a very versatile heavy-lifter suitable for most workshops.
Features
- Seals made in America
- Double Sealing Function using XTP Industry Sealing
- Telescopic air actuation lift (air-hydraulic pump)
- Long T-handle lets you easily position your jack under vehicle
- Self-Returning Lowering and Lifting Switch
- Internal and External Cylinders hard chromed
- High manoeuvrability & deep reach under vehicles
- 3 extension adaptors / saddle plates
- Large rubber wheels
- All adaptors can be properly stored for transport on each side of the jack

Specifications
- Safe Working Capacity: 20,000kg
- Minimum Height: 215mm
- Maximum Height: 541mm
- Hydraulic Lift: 141mm
- Adjustable Screw: 85mm
- Adaptors: 20, 50, 100mm
- Handle Length: 1335mm
- Operating Air Pressure: 145-175psi
- Chassis: 520(L) x 215(H) x 258(W)mm
- Nett Weight: 40kg
- Carton: 580x290x260mm
- Gross Weight: 42kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Bottle Jacks
TQB BRANDS Bottle Jack 10,000kg
This powerful, heavy-duty TradeQuip “Made for the Trade” Hydraulic Bottle Jack with high quality glide-action pressure pump is designed for hard-hitting commercial use, making large loads easy to lift. The lightweight jack is ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. High quality, fitted with unique overload protection system and large stable base. Supplied with 500mm pump handle.
Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
Features
- Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance
- Fabricated from hard-cast steel with heat-treated critical stress areas
- Unique cross-type forged release valve assures positive load control
- Overload protection Hydraulic system is protected from internal damage by a by-pass mechanism
Specifications
- Safe Working Capacity: 10,000kg
- Hydraulic Lift: 130mm
- Adjustable Screw Height: 65mm
- Minimum Height: 200mm
- Maximum Height: 395mm
- Base Area: 124 x 124mm
- Handle: 500 x 20mm
- Carton: 140 x 135 x 215mm (plus handle)
- Gross Weight: 6kg
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use support stands.
Intended Use
For heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Transmission Lifters
TRADEQUIP Auxiliary Lifter 500kg
This 500kg capacity TradeQuip “Made for the Trade” Hydraulic Telescopic Auxiliary Lifter has a 4 prong mounting cradle suitable for partial temporary support of vehicle components. The foot-operated quick lift pump frees up operator’s hands when positioning for lift and the hand operated lowering mechanism provides safety with its extra slow lower control.
Not intended for supporting loads and not intended as a stand alone transmission lifter

Features
- Designed for partial temporary support of vehicle components during removal and installation of components
- Nylon wheels and full swivel ball bearing castors for easy movement
- High polished chrome-plated rams provides smooth operation to maximise its high reach that is lifted by the user-friendly hand release pedal
- 4 prong mounting cradle
- Included “cup” style saddle for smaller areas of work
- Unique hand release knob provides extra slow control safety when lowering
Specifications
- Safe Working Capacity: 500kg
- Minimum Height: 1175mm
- Maximum Height: 1985mm
- Cradle Size: 362 x 362mm
- Lift Pad Accessory: 107.5mm Dia
- Base Dimensions: 540 x 570mm
- Nett Weight: 35.5kg
- Crate: 1110 x 320 x 275mm
- Gross Weight: 37kg
Intended Use
Designed for partial temporary support of vehicle components during removal and installation of components. Not intended for supporting loads and not intended as a stand alone transmission lifter.
(0 reviews) -
Transmission Lifters
TRADEQUIP Auxiliary Lifter Kit 500kg
This 500kg capacity TradeQuip “Made for the Trade” Hydraulic Telescopic Auxiliary Lifter kit is ideal for partial temporary support of vehicle components in a busy workshop. The foot-operated quick lift pump frees up operator’s hands when positioning for lift and the hand operated lowering mechanism provides safety with its extra slow lower control.
Not intended for supporting loads and not intended as a stand alone transmission lifter

Features
- Designed for partial temporary support of vehicle components during removal and installation of components
- Nylon wheels and full swivel ball bearing castors for easy movement
- High polished chrome-plated rams provides smooth operation to maximise its high reach that is lifted by the user-friendly hand release pedal
- 4 prong mounting cradle
- Included “cup” style lift pad for smaller areas of work
- Included adjustable fuel tank adaptor to provide extra stability
- Unique hand release knob provides extra slow control safety when lowering
Specifications
- Safe Working Capacity: 500kg
- Minimum Height: 1175mm
- Maximum Height: 1985mm
- Cradle Size: 362 x 362mm
- Lift Pad Accessory: 107.5mm Dia
- Fuel Tank Holder: 812 x 352mm
- Base Dimensions: 540 x 570mm
- Nett Weight: 35.3kg
- Crate: 1110 x 315 x 275mm
- Gross Weight: 52kg
Intended Use
Designed for partial temporary support of vehicle components during removal and installation of components. Not intended for supporting loads and not intended as a stand alone transmission lifter.
(0 reviews)



































