KINCROME Electric Hoist Frame 750mm (825kg)
Related products
-
Wheel, Dollies & SuspensionTQB BRANDS Heavy Duty Wheel Dolly Lifter 1200kg
This Borum Industrial Hydraulic 1200kg Heavy Duty Wheel Dolly Lifter is designed for the removal, installation and transportation of large truck, earthmoving, tractor and agricultural commercial tyre and wheel combinations. Hydraulically activated lift arms handle wheel assemblies from 1000mm up to 2000mm in wheel diameter. Four ball bearing mounted castor wheels provide positive stability and easy manoeuvrability. Quadruple bearing mounted lift rollers easily rotate vehicle rim & tyre for bolt pattern alignment while the integrated tyre clamp support arm keeps the wheel secured in place.
Features:
- Hydraulic system actuated to provide smooth, positive power for the removal and installation of large commercial wheel & tyre combinations
- Heavy duty steel frame adjusts laterally to allow precise positioning of commercial truck, earthmoving, agricultural & tractor tyres along with the wheel rollers for further control.
- Supports heavy commercial rims and tyres up to 1200kg
- Rolls easily on four quality steel bearing castors
- Includes heavy duty adjustable support arm to keep load secure
- Integrated locking pin secures the dolly to relieve hydraulic pressure under load
- Lead-free paint is applied to ensure a long-lasting finish and prevent corrosion
- Paint finish is oil, grease and dirt-resistant for easy cleanup
Specifications:
- Safe Working Capacity: 1200kg
- Min. Tyre Diameter: 1000mm
- Max. Tyre Diameter: 2000mm
- Lifting Range: 0 – 750mm
- Roller Length: 490mm
- Roller Diameter: 80mm
- Roller Table Area: 490 x 320mm
- Caster Wheel Diameter: 150mm
- Ground Clearance (Rollers Lowered): 90mm
- Jack Handle & Positioning Handle Length: 1000mm
- Minimum Footprint (Jack Handle Extended Out & Support Arm Vertical): 2000(L) x 1000(D) x 1340(H)mm
- Maximum Footprint (Jack Handle Extended Out & Support Arm Vertical): 2500(L) x 1000(D) x 2100(H)mm
- Crate Dimensions: 1340(L) x 1030(W) x 330(H)mm
- Nett Weight: 113kg
- Gross Weight: 143kg
Intended Use
Designed to facilitate the removal and installation of pneumatic tyres and wheel assemblies on earth movers, trucks, buses, agricultural machinery and trailers up to 1200kg & 2000mm diameter.
(0 reviews) -
Wheel, Dollies & SuspensionTQB BRANDS Wheel / Tyre Lifter
The TradeQuip “Made for the Trade” Wheel/Tyre Lifter is characterized by a pair of laterally spaced lifting arms that raise and lower in unison and are so, arranged as to contact the vehicle tyre at two areas on its circumference to raise or lower a wheel/tyre combination for the purpose of removing, transporting, and replacing wheel and tyre combinations. The lifter’s drive screw can be activated by an air or battery-operated impact gun from the top of the unit in a vertical position or through a gear box in a horizontal position if installed. The intent of the lifter is to remove risk of back or other injury to technicians.
Features
- Braked Swivel Castor
- Sturdy Frame to safely transport wheel around workshop
- Adjustable Safety Brace
Specifications
- Safe Working Capacity: 50kg
- Lift Range from Roller Top to Ground: 93 ~ 1078mm
- Roller Diameter & Length: (D) 76.2 x 240mm
- Rollers Moving Distance: 125mm
- Rollers Push Force: <4kg based on 50kg load
- Lifting Handle Force: 1kg based on 50kg load
- Distance Between Wheel Rack And Main Support: 130mm retracted, 250mm fully extended
- Front Castors: 2(D) 75 x 24mm
- Rear Castor – Locking: 2(D) 75 x 24mm
- Base: 876(L) x 720(W) x 101.6(H)mm
- Weight: 51.25kg
Intended Use
For the lifting, lowering, supporting and transporting of tyre and rim assemblies up to 50kgs and 300mm wide.
(0 reviews) -
Cranes & Lifting DevicesTQB BRANDS Engine Crane Load Leveller 680kg
The perfect accessory for our engine cranes, this TradeQuip “Made for the Trade” Engine Leveller reduces the hazards and hassles out of balancing heavy, awkward loads and helps protect engines, transmissions and vehicle damage. Perfect for removing and installing engines, it easily adjusts the angle of the engine simply by turning the swivel handle and is compatible with most good brands of engine cranes.The load leveller includes four 300mm chains with support brackets for increased load security and safety.
Features
- Easy to use, just crank to level
- Tilts forward and backward for easy motor mount alignment
- Heavy duty steel I-beam construction
- Balances engine/transmission for easier installation or removal
- Constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- Easily adapts to different engine cranes and improves the install/removal operation
- 4-point mounting system provides maximum control
- Worm drive shaft rotates with a built-in swivel handle for easy balancing
- 3 adjustable chain assembly holes for different engine sizes
Specifications
- Safe Working Capacity: 680kg
- Chain Length: 300mm
- Chain Anchor Positions: 3
- Engine Mount Positions: 4
- Working Range: 250mm, 275mm, 310mm
- Weight: 6kg
- Carton: 465 x 190 x 60mm
Intended Use
For regular professional use, to tilt engines and/or transmissions whilst raising and/or lowering passenger car engines and transmissions with an engine crane or hoist.
(0 reviews)
