Safety
Showing 37–72 of 284 results
-
Rope & Lanyards
GRIPPS Coil Tether Single Action 1kg
Tethering to a tool belt, pouch, holster, or harness, the Coil Tether Single-Action is engineered to stay out of the way when not in use, readily extending to its maximum length when the tool is in use.
Lightweight single-action carabiners mounted on swivel heads prevent tangles and unnecessary tension while using your tool.
The extra-thick PU coating on the stainless steel coil prevents kinking and is resistant to heat and sharp edges.
Key Features
- Two lightweight single-action carabiners.
- Suitable for holsters, belts, pouches & harnesses.
- Low profile & lightweight design.
- Extra thick PU coated stainless steel coil.
- Heat & cut resistance.
Specifications
- Min Length: 40cm / 16″
- Max Length: 1.6m / 63″
- Max Load: 1.0kg / 2.2lbs
- Two Single-Action Carabiner
(0 reviews) -
Accessories
GRIPPS Electrical Trade Kit
An end-to-end solution covering the entire suite of hand and power tools used by Electricians.
Tethers up to 31 tools.
Kit Contents
- 1 x H02056 Tape Measure Catch
- 1 x H10100 Bungee Tether Dual-Action 5.0kg
- 1 x H01068 Coil tether Single-Action
- 1 x H01021 Swivel Catch
- 10 x H01007 Tool Catch (Non-Conductive)
- 1 x H01010 V-Gripp Tape
- 1 x H01067 Webbing Wrist Tether Single-Action
- 1 x H01062 Coil Single-Action Wrist Tether (Non-Conductive)
- 1 x H01142 Belt-Loop Anchor
- 1 x H01085-M Slip-On Wrist Anchor (Medium)
- 10 x H01030 Screwlock Cable – 3.0mm x 12cm / 0.1″ x 4.75″
- 1 x H03048 Little Gripper Kit
(0 reviews) -
Accessories
GRIPPS Little Gripper Kit
If you need a tool tethering solution that’s quick to apply and doesn’t hamper tool functionality, then you need a Little Gripper.
Moulded from a specialised TPU material, the Little Gripper provides an instant load-rated tool connection point without the need for adhesives.
Compatible with round and polygonal-shaped shafts, the 4 sizes cover a massive range of tools including screwdrivers, punches and more.
Key Features
- Moulded from custom German-engineered TPU compounds.
- No additional adhesives or tools are required for application.
- UV-protected for long-lasting outdoor use.
- Compatible with tool shafts of all shapes & thicknesses.
Kit Contents:
- 2 x Size #1 Little Gripper
- 2 x Size #2 Little Gripper
- 2 x Size #3 Little Gripper
- 2 x Size #4 Little Gripper
- 4 x GrippLink Connectors
Specifications
Size Tool Shaft Diameter Max Load
(Without GrippLink)Max Load
(With GrippLink)#1 3.5mm – 6.0mm
0.1″ – 0.2″0.5kg
1.1lbs1.0kg
2.2lbs#2 5.5mm – 9.0mm
0.2″ – 0.3″0.5kg
1.1lbs1.0kg
2.2lbs#3 8.0mm – 13mm
0.3″ – 0.5″0.5kg
1.1lbs2.5kg
5.5lbs#4 12mm – 16mm
0.5″ – 0.6″0.5kg
1.1lbs2.5kg
5.5lbs(0 reviews) -
Accessories
GRIPPS Phone Gripper with Coil Tether
Now you can tether your phone or mobile device without the need for a permanent or semi-permanent connection point. Used in conjunction with a load rated tether, the Phone Gripper and Tablet Gripper use purpose-built silicon to create a load rated tethering solution with zero impact on device operation.
Traditional mobile device tethering relies on the use of powerful adhesives being applied directly to your mobile device to attach a load rated connection point that damages the devices finish when removed.
The flexible design of the Phone Gripper allows you to tether your mobile device ‘on-demand’, allowing you free use of your mobile device when operating at height.
Key Features
- Custom silicon compound made for strength & grip.
- Avoids installing a permanent connector point on a mobile device.
- No additional adhesives required.
- Integrated, load rated tether connection eyelet.
- Compatible with virtually every smartphone model.
Specifications
- Max Load: 0.3kg / 0.7Ibs
- Conforms to ANSI/ISEA 121-2018
(0 reviews) -
Accessories
GRIPPS Ratchet/Wrench Holster MKII
Engineered to carry a wide range of ratchets and wrenches, the Ratchet/Wrench Holster makes transporting and using your tools a breeze when working at height.
This holster also includes the option for a horizontal-release retractor unit.
Key Features
- Compatible with all standard work belts.
- 2 x load rated D-Rings.
- Drain hole.
- Lightweight design with industrial toughness.
- Compatible with GRIPPS® Retractor Units.
Specifications
- Max Load (D-Ring): 2.5kg / 5.5lbs
- Conforms to ANSI/ISEA 121-2018
(0 reviews) -
Accessories
GRIPPS Safety Glasses Tether
Eye-wear is an essential piece of PPE for many industrial workers. While working at height, it’s particularly easy to accidentally knock or drop your glasses, so GRIPPS have developed our own super light Safety Glasses Tether. Easily adjustable to suit your neck for comfort, they also come with very strong slide-on style GRIPPS to attach to your sunglasses, personal glasses or PPE eyewear. Eliminate the stress of potentially dropping your glasses, with the highly convenient Safety Glasses Tether. An essential item that you can easily slip into your pocket, keep in the car, toolbox or simply wear daily!
Features:
- Premium quality wire rope straps
- Silicone rubber grips that securely hold all styles of safety glasses
- Adjustable length
- Load rated
Specifications:Product Code: H10000Max Load: 0.1KG / 0.22LBS
Length Closed: 230MM / 9IN* PPE Glasses not included
(0 reviews) -
Accessories
GRIPPS Screwlock Cable
The Screwlock Cable provides a quick, easy and cost-effective way to create a certified, load-rated tool connection point for tools with a suitable existing hole.
With a core band made from aircraft-grade steel, the load-rated and certified Screwlock Cable is as dependable as it is hard-wearing.
Create your secure tool connection point by simply threading the Screwlock Cable through a suitable existing hang-hole/slot in your tool, and screw closed. Add a drop of thread-locking compound before you screw shut to create a permanent load rated connection point on your tools.
Key Features
- PU coated aircraft-grade steel.
- Easy to maintain & swap between tools.
- Easy installation process that can be performed on-site.
- Can be locked permanently using thread locking compounds.
- Available in four sizes.
Specifications
- Size: 3mm x 150mm / 0.1″ x 6.0″
- Max Load: 1.0kg / 2.2lbs
Conforms to ANSI/ISEA121-2018
(0 reviews) -
Accessories
GRIPPS Seal Kit Bag -20kg
GRIPPS Seal Bags are heavy-duty, hard-wearing, waterproof gear bags designed for the most demanding of industrial work sites. Engineered utilising reinforced tarpaulin material and featuring detachable shoulder straps and water-resistant zips, these bags are ready for any work site. A solid duffle bag to add to your work gear collection.
Features:- Heavy-duty weatherproof PVC tarpaulin barrel bag
- #10 water-resistant zips
- 20kg (44lbs) load rating
- Removable padded shoulder straps convert barrel bag to backpack
- Heavy-duty 2″ webbing encircles the bag for extra strength
- End haul handles
- Twin QR compression straps
Specifications:Volume: 65L / 17 gal
Dimensions: 60 x 35 x 35cmWeight 1.6 kg(0 reviews) -
Accessories
GRIPPS Tablets Gripper with Coil Tether
Now you can tether your tablet without the need for a permanent or semi-permanent connection point. Used in conjunction with a load rated tether, the Tablet Gripper use purpose-built silicon to create a load rated tethering solution with zero impact on device operation.
Traditional mobile device tethering relies on the use of powerful adhesives being applied directly to your mobile device to attach a load rated connection point that damages the devices finish when removed.
The flexible design of the Tablet Gripper allows you to tether your mobile device ‘on-demand’, allowing you free use of your mobile device when operating at height.
Key Features
- Custom silicon compound made for strength & grip.
- Avoids installing a permanent connector point on a mobile device.
- No additional adhesives required.
- Integrated, load rated tether connection eyelet.
- Compatible with virtually every tablet model.
Specifications
- Max Load: 0.85KG
- Conforms to ANSI/ISEA 121-2018
- Coil Tether Single-Action Max Load: 1KG/2.2LBS
(0 reviews) -
Accessories
GRIPPS Water Bottle Holder – Waterboy
Keep drinks cool and spray cans secure with the Waterboy.
Constructed from synthetic rubber that insulates against heat, the top securing flap has been engineered to allow full functionality of a spray can form within the holster, as well as access to water bottle pop-tops and screw tops.
A load-rated poly D-Ring allows the holster and its contents to be tethered securely against drops.
If carrying on a belt, the Waterboy can be clipped on using the in-built metal clip.
Key Features
- Insulated synthetic rubber design that can stretch to accommodate most sizes of bottles & cans.
- Full functionality of spray cans & screw/pop-top water bottles whilst in the holster.
Specifications
- Max Load: 0.75kg / 1.6lbs
(0 reviews) -
Accessories/Parts
LINQ Ladder Braq-It
- The LINQ Ladder Gutter BRAQ-IT has multi-positional slide brackets to fit most rung ladders.
- The LINQ fit and forget design becomes integral to the ladder it is attached to.
- Comes with I.D plate with Batch and Date of Manufacture for ease of traceability.
- Durable powder coated finish.
- Fit and forget attachment once adjusted into place.
- Seamlessly integrates into most ladder rungs, providing enduring support.
- Protects gutter profile with integrated rubber lining.
- Adjustable wing and clamp makes it versatile to use on most ladders.
- Ensures safety of user on and off the ladder.
- AUS/NZ Designed and Engineered
- Adjusts up to 475mm wide.
(0 reviews) -
Descenders/ Rescue Devices
SKYLOTEC Claw
Made of high-quality stainless steel, the CLAW steel rope runner is suitable for vertical access to higher or lower workplaces on arrester systems with 8-10 mm or 5/16 to 3/8 inch stainless steel ropes. It is particularly characterised by its excellent running properties, which allow fatigue-free ascent and descent. The fall arrester that runs along has a well thought-out 3-fold safety device: the internal mechanical lock prevents it from being put on incorrectly, the external mechanical lock only allows it to be opened with both hands. In addition, a skull and crossbones symbol warns the user if the rope is put on incorrectly. If the climber slips or falls, CLAW locks immediately and the strap energy absorber reduces the forces. CLAW is certified to EN 353-1:2014+A1:2017 and ANSI Z359.16:2016, ANSI/ASSE A14.3-08, CSA Z259.2.5-17, OSHA and secures a maximum of one person weighing 50 to 150 kg.
– High-quality steel rope runner made of stainless steel.
– Fatigue-free ascent and descent
– Sophisticated 3-fold safety device(0 reviews) -
Descenders/ Rescue Devices
SKYLOTEC Deus One Evacuation Device
The DEUS ONE is a personal, fully automatic self-evacuation device. The very small, handy format offers intuitive operation in emergency situations and is ready-to-use due to its configuration with rope and steel carabiners. Without any necessary additional intervention in the abseiling process, even injured or unconscious persons arrive safely on the ground. The extremely compact and lightweight hybrid rope is only 5.9mm thick and heat-resistant up to 450°C. The set is maximally protected from moisture in a Sealpac packaging and can thus achieve a 15-year service life. All components are packed very practically in a compact, protective bag with adjustable straps, making it easy to take to any workplace.
- the smallest, fully automatic self-evacuation device on the market
- compact to carry on the person
- user weight range: 60kg -140kg
Available in 100m & 160m
(0 reviews) -
Rope & Lanyards
SKYLOTEC Ergogrip SK16
Kernmantel rope European style adjustable POLE STRAP with ergonomic adjuster for safe and easy handling. Minimum adjustable length 45cm. Designed for work positioning, assisted climbing & restraint applications on structures such as mono poles, masts & towers. Available in various lengths.
(0 reviews) -
Rope & Lanyards
SKYLOTEC Gordon Lift System
This pulley system based on the GORDON RESCUE facilitates the transport of loads up to 300 kilograms. The device is self-locking in one direction to prevent loads from falling, even if the rope is released. This high-quality device comes with a 2:1 configuration with rope pulley, two carabiners and an 11 mm rope of the desired length incl. a DRYBAG. Important note: Pulley system only, no PPE!
Available in 25m & 50m
(0 reviews) -
Climbing Helmets
Skylotec INCEPTOR GRX
The INCEPTOR GRX is redefining the concept of safety. The specially-designed EPS thorax and PC/ABS shell absorb particularly high impact energies, both in the vertex area and at the side. The largest possible ventilation holes and ergonomic EPS thorax ensure exceptional wearing comfort. The INCEPTOR GRX’s neck strap allows continuous width adjustment from 54 to 63 cm. The chin strap is equipped with a Fidlock buckle: the ergonomic magnetic closure is easy to open and close with its secure and self-actuated engagement. The gear rack, multiple helmet clips and Euroslots allow accessories such as headlamps, hearing protection and neck guards to be attached. All of the padding inside can be interchanged, cleaned or replaced. Not least, the INCEPTOR GRX impresses with its striking and straightforward contours.
Available in White, Black & Orange
(0 reviews) -
Climbing Helmets
SKYLOTEC INCEPTOR GRX REF
Skylotec INCEPTOR GRX Reflective
The INCEPTOR GRX is redefining the concept of safety. The specially-designed EPS thorax and PC/ABS shell absorb particularly high impact energies, both in the vertex area and at the side. The largest possible ventilation holes and ergonomic EPS thorax ensure exceptional wearing comfort. The INCEPTOR GRX’s neck strap allows continuous width adjustment from 54 to 63 cm. The chin strap is equipped with a Fidlock buckle: the ergonomic magnetic closure is easy to open and close with its secure and self-actuated engagement. The gear rack, multiple helmet clips and Euroslots allow accessories such as headlamps, hearing protection and neck guards to be attached. All of the padding inside can be interchanged, cleaned or replaced. Not least, the INCEPTOR GRX impresses with its striking and straightforward contours.
Available in White, Black & Orange
(0 reviews) -
Rope & Lanyards
SKYLOTEC Lifeline Horizontal
Temporary horizontal fall protection systems are very popular for assembly work in steel construction, in scaffolding and in general construction. LIFELINE HORIZONTAL is a portable, very quick to assemble and flexible fastening device. Two people can be secured over a distance of 20 metres as they work. The system’s two carabiners can be attached using slings (for example) to suitable structures such as steel beams, scaffolding or concrete pillars. According to new regulatory certification requirements, the structure used must be configured for a load of 6 kN, since in the event of a fall, the force exerted on the system is limited to a maximum of 6 kN by means of damping elements. – 20 metre horizontal range – The structure used only needs to be able to withstand a load of 6 kN – Flexible horizontal fall protection system for nearly every kind of construction site
(0 reviews) -
Rope & Lanyards
SKYLOTEC Lory X
LORY X (model with carabiners OVALOY TRI / ATTACK) is a work positioner that can be adjusted under loads. The device has a handle for setting it to an optimal working position while in motion. An integrated panic function prevents unintended lurching rope movement if the lever is opened too far. The silver button in the middle of the device can no longer be opened by pressing which prevents unintentional opening during use. All that’s needed to exchange the rope when worn or if needed is an Allan wrench size 2. The rope thickness is 11 mm. LORY X can also be used as a backup safety device or lanyard.
- Adjustable work positioning rope when under loads
- Anti-panic function with strong lever
- Rope can be exchanged using an Allan wrench
Available in 2m & 3m
(0 reviews) -
Descenders/ Rescue Devices
SKYLOTEC Sirius Descender
SIRIUS packs the advantages of the best descenders for industrial and rescue applications into an extremely compact design – for better handling and long service life. SIRIUS lies perfectly in your hand. The auto-returning operating lever has a particularly small radius of motion so that you can work fast, accurately, more comfortably and safely. During rope insertion, which is intuitive and simple, the carabiner on the harness can stay connected to the device. We designed the route of the rope in such a way that it is protected from twisting and kinking, and from excessive wear and tear. SIRIUS was developed for extended use under the toughest of conditions. That’s why it is made of up to 100 % metal – without any vulnerable synthetic spots. SIRIUS. Best ergonomics and long service life in its most compact form:
– Outstanding handling thanks to compact design and intuitive route of the rope – Long-lasting and sturdy: 100% metal – Auto-locking function, improved an
(0 reviews) -
Rope & Lanyards
SKYLOTEC Skysafe Pro Flex Y
ONE4ALL – The SKYSAFE PRO
Revolutionary, new energy absorber with the large weight range from 50 – 140kg (110 – 310 lbs.) that always withstands a maximum impact of less than 6 kN at a maximum absorber length of 1.75m (5.7 Feet).
The final impact resistance of 22 kN, also in the absorber, before AND after a fall is exceptional as well. SKYSAFE PRO furthermore meets the most relevant international standards in one SINGLE product.
UNIQUE: The built-in, adjustable RESCUE LOOPS! As a result, rescuers need not set up a rescue system and hereby save precious time in a rescue!
Available in four versions with different carabiner combinations: I-web, Y-web, I-web tie-back, Y-web tie-back.
(0 reviews) -
Rope & Lanyards
SKYLOTEC Skysafe Pro Flex Y
ONE4ALL – The SKYSAFE PRO
Revolutionary, new energy absorber with the large weight range from 50 – 140kg (110 – 310 lbs.) that always withstands a maximum impact of less than 6 kN at a maximum absorber length of 1.75m (5.7 Feet).
The final impact resistance of 22 kN, also in the absorber, before AND after a fall is exceptional as well. SKYSAFE PRO furthermore meets the most relevant international standards in one SINGLE product.
UNIQUE: The built-in, adjustable RESCUE LOOPS! As a result, rescuers need not set up a rescue system and hereby save precious time in a rescue!
Available in four versions with different carabiner combinations: I-web, Y-web, I-web tie-back, Y-web tie-back.
(0 reviews) -
Accessories
SKYLOTEC Visix
This optimally shaped transparent all-purpose half visor protects the face from impacts and flying parts. The unique sealing lip prevents even the smallest particles from entering. It is made of polycarbonate with high impact protection. VISIX can be easily and quickly attached to the Gear Rack of any INCEPTOR GRX helmet without additional tools. When working, the visor can be flexibly adjusted to be worn lowered, at half height or upwards. It also provides exterior protection against scratches as well as fog protection from the inside. – Molded polycarbonate visor with high impact protection – Versatile, easy to fit – Compatible with all INCEPTOR GRX helmets
(0 reviews) -
Mats
THE MAT GROUP Comfort Kneeling Mat
Description
The Comfort Kneeling Mat meets the needs of tradespeople, telecommunications engineers or the home handyman – anyone who needs to kneel.
Key Features and Benefits:
- Perfect WHS accessory
- Relieves the pressure of hard, rough or cold surfaces
- Take it to the Footy to keep your bottom warm!
- Great for gardening
- Heavy Duty Kneeling Mat for industrial use also available
Mat SpecificationsUses: Tradespeople, Gardening use, Sports Trainers, Seating at outdoor events, domestic use
Materials: Closed Cell Vinyl Foam
Thickness: 12mm
Colours: Black
Size: 500mm x 375mm
(0 reviews) -
Mats
THE MAT GROUP Diamond Plate Gel Mat
Description
This extremely popular anti-fatigue mat provides exceptional comfort, longevity and safety.
The resilient sponge base defines the mat by providing true comfort, to enhance productivity and mood where standing for long periods is required.
Key Features and Benefits:
- Rugged, durable, and boasting a 4mm vinyl skin surface
- An embossed diamond pattern that actively prevents slips
- Top surface bonded to 12mm buoyant EVA non-slip backing
- Features bright, built-in yellow borders along both edges that are also beveled to reduce the chance of trips
- Has a unique, bonded, slip resisting EVA underlay as standard, that minimises mat movement
- Available in standard sizes, rolls and Made To Measure
Mat Specifications
Uses: Dry area workstations. Ideal for factory and industrial areas.
Materials: Premier EVA substrate with a vinyl skin surface and a non-slip backing
Thickness: 16mm
Colour: Black with yellow borders
(0 reviews) -
Mats
THE MAT GROUP Heavy Duty Kneeling Mat
Description
The Heavy Duty Kneeling Mat is ideal for occupations that require kneeling as it reduces knee trauma and lower back stress.
This mat will not absorb liquids and has a built-in handle that makes it convenient to carry and store.
Designed for construction workers, technicians, mechanics, engineers, utility workers, manufacturers or anyone who is needed to move from place to place to carry out work.
Key Features and Benefits:
- Reduces knee trauma and lower back
- Non-conductive and absorbs minimal water
- Good for resting on gravel, grating, wood, high density metals/alloys, concrete and asphalt
- Cleans easily with soap and water
- Lightweight
- Built-in handle that makes it convenient to carry
and store - The removable handle insert can be used as a hand
stress reliever
Mat SpecificationsUses: Helps relieve knee trauma and back stress for workers that kneel for extended periods
Materials: Thick closed cell Nitrile blend, resilient foam
Thickness: 22mm
Colours: Black
Size: 300mm x 560mm
(0 reviews) -
Mats
THE MAT GROUP Safewalk Premium Mat
Description
The multipurpose, anti-fatigue Safewalk Premium Mat allows for superior drainage, making it a popular choice for wet areas.
This mat is ideal for kitchens, restaurants, bars, food service areas and can also be used for industrial workstations.
Key Features and Benefits:
- Multi-purpose anti-fatigue mat
- Superior Drainage
- Grease resistant natural rubber – also available in a grease and oil proof nitrile rubber
- Moulded bevelled edges on all sides
- Premium choice for comfort and safety
- Premium Grade – also available in Standard Grade
Mat Specifications
Uses: Wet areas – Ideal for kitchens, restaurants and behind bars
Materials: Natural Rubber – also available in a terracotta nitrile rubber
Thickness: 12mm
Colours: Black
Edging: Moulded bevelled edges on all sides
(0 reviews) -
Mats
THE MAT GROUP Safewalk Standard Mat
Description
The Safewalk Standard Mat allows for superior drainage in wet areas, while being an economical choice for comfort and safety.
This anti-fatigue mat is ideal for kitchens, restaurants, bars, food service areas and can also be used for industrial workstations.
Key Features and Benefits:
- Multi-purpose anti-fatigue mat
- Superior drainage
- Grease resistant natural rubber – also available in a grease and oil proof nitrile rubber
- Moulded bevelled edges on all sides
- Economical choice for comfort and safety
- Lighter than the Safewalk Premium Mat
- Standard Grade – also available in Premium Grade
Mat Specifications
Uses: Wet areas – Ideal for kitchens, restaurants and behind bars
Materials: Natural Rubber – also available in a terracotta nitrile rubber
Thickness: 12mm
Colours: Black
Edging: Moulded bevelled edges on all sides
(0 reviews) -
Mats
THE MAT GROUP Santising Foot Bath
Description
Also known as the Boot Dip Mat, the Sanitising Foot Bath is perfect for outside food processing plants, laboratories, hospitals, agricultural farming applications or any areas where you need to disinfect footwear before entry.
This Sanitising Foot Bath mat has thousands of pliable rubber scrapers that dislodge contaminates from footwear as the shoe soles are immersed in the disinfectant solution.
Key Features and Benefits:
- Keeps hygienic areas free of contamination and germs
- Scrapers remove dirt while footwear is immersed in disinfectant solution
- Manufactured from high-grade rubber
- Designed to hold up to 20L of disinfectant solution *Disinfectant solution not included
- Black with Black Border or Yellow Border for added safety
Recommended for:
- Food processing plants
- Laboratories
- Hospitals
- Agricultural farming applications
Mat Specifications
Uses: Outside food processing plants, laboratories, hospitals, agricultural farming applications or any areas where you need to disinfect footwear before entry.
Materials: 100% Rubber
Thickness: 47mm – also available in 13mm
Colours: Black with black border, or Black with yellow border
(0 reviews) -
Mats
THE MAT GROUP Supreme Comfort Mat
Description
Compared to other “bubble/dome” mats, the low profile domes of Supreme Comfort provides a more stable surface eliminating heels/feet roll-over hazards, while facilitating ease of turning, twisting and movement on the mat.
Uniquely designed suction cups that act as supports for air cushions and flexible texture of pure natural rubber, bring together buoyancy and superb comfort not found in any other rubber Anti-Fatigue Mat.
Key Features and Benefits:
- Low profile domes provide stability and support
- Suction cup backing provides great stability
- Natural rubber compound provides excellent insulation
- Raised dome design offers good slip resistance
Mat Specifications
Uses: Wet or dry areas. Anywhere workers are constantly stationary and on their feet
Materials: Natural and Recycled Rubber
Thickness: 14mm
Colour: Black or Black with Yellow Safety Border
(0 reviews) -
Welding
3M Speedglas Welding Helmet 100 Ninja
- Code 751120
- Made in Sweden with an industry leading 3 year warranty on lens
- High impact to Australian & New Zealand Standards (AS/NZS 1337)
- Speedglas optical quality and comfort
- TST (TIG Sensor Technology) reacts down to 10 amps
- New smooth ratchet head harness
- Shades 3/8-12 with magnifying lens holder
- Extra light shade 3 grind function with high impact rating
- Dark shades can be increased using upgrade plates
- New delay setting (set your dark to light return time)
- Magnifying lens holder for exact placement
(0 reviews) -
Site Safety
A Frame Sign Swing Stand
A-Frame Temporary Sign Swing Stand Fluoro Yellow Galvanised
Sizes: 600 x 600mm, 900 x 600mm, 1200 x 900mm
(0 reviews) -
Site Safety
Air Horn Rechargeable
EcoBlast Rechargeable Signal Air Horn – refills with air
- Suitable for industrial safety, marine & sporting use
- Safe for environment, refills with air – not gas
- Refill with pump included in kit, or any compressed air source
- Powerful 115dB sound
(0 reviews) -
Eyewear
PRO CHOICE Ambush Foam Bound Spec / Goggle
- Clear Lens Code: 9070
- Smoke Lens Code: 9072
- Certified to AS/NZS 1337.1:2010
- Medium impact
- 99.9% UV protection
- Anti-fog, anti-scratch lens
- Foam gasket for exceptional protection against dust & particles
- Adjustable ratchet arms can be detached and replaced with supplied head strap for a closer, tighter seal
- Durable & flexible nylon frame
- Optically correct 9 base curve lens for increased eye & lateral coverage
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
CHEMTOOLS Anti-Spatter Heavy Duty
Chemtools Anti-Spatter Heavy Duty (CT-ASL) 5L or 20L
A heavy duty anti-spatter liquid which provides instant shielding action against weld spatter. The ‘easy wipe off’ milky formula is highly heat resistant and will not evaporate as quickly as other water based anti spatter products.
- Usable on most welding, manual, automatic and robotic applications
- Water based
- Silicone free
- Low odour
- Non-flammable
- Prevents corrosion
- Cleans up easily with no residue
- An eco-friendly product that significantly reduces or eliminates spatter adhesion on weld nozzles, parts and tooling
- Suitable for medium to large amounts of splatter or slag
(0 reviews) -
Welding
CHEMTOOLS Anti-Spatter Protecta Shield Nozzle Coating 300g
Chemtools Zero-Spat Protecta Shield High Temperature Ceramic Anti-Spatter 300g Aerosol (CT-PTS)
A high temperature protective ceramic coating for welding nozzles, jigs, tools, equipment and the product being welded. Protecta Shield is a silicone-free dry film protective coating which is specially formulated for all MIG and Laser/Plasma cutting.
- Lasts between 6 – 8 hours
- Ideal for use on automatic welding tools and surrounding equipment
- Leaves a dry white film
- Spatter wipes away without sticking
(0 reviews)