Additional information
| Weight | 0.4 kg |
|---|---|
| Dimensions | 20 × 20 × 5 cm |
GRIPPS Little Gripper Kit
If you need a tool tethering solution that’s quick to apply and doesn’t hamper tool functionality, then you need a Little Gripper.
Moulded from a specialised TPU material, the Little Gripper provides an instant load-rated tool connection point without the need for adhesives.
Compatible with round and polygonal-shaped shafts, the 4 sizes cover a massive range of tools including screwdrivers, punches and more.
Key Features
- Moulded from custom German-engineered TPU compounds.
- No additional adhesives or tools are required for application.
- UV-protected for long-lasting outdoor use.
- Compatible with tool shafts of all shapes & thicknesses.
Kit Contents:
- 2 x Size #1 Little Gripper
- 2 x Size #2 Little Gripper
- 2 x Size #3 Little Gripper
- 2 x Size #4 Little Gripper
- 4 x GrippLink Connectors
Specifications
| Size | Tool Shaft Diameter | Max Load (Without GrippLink) |
Max Load (With GrippLink) |
|---|---|---|---|
| #1 | 3.5mm – 6.0mm 0.1″ – 0.2″ |
0.5kg 1.1lbs |
1.0kg 2.2lbs |
| #2 | 5.5mm – 9.0mm 0.2″ – 0.3″ |
0.5kg 1.1lbs |
1.0kg 2.2lbs |
| #3 | 8.0mm – 13mm 0.3″ – 0.5″ |
0.5kg 1.1lbs |
2.5kg 5.5lbs |
| #4 | 12mm – 16mm 0.5″ – 0.6″ |
0.5kg 1.1lbs |
2.5kg 5.5lbs |
Related products
-
HarnessesSKYLOTEC Ignite Nucleon
This full-featured fall arrest and restraint harness with skid plate and arrester eyelet was developed specifically for wind energy, but it is also used in many other fields such as telecoms, power and construction where the highest standards of safety and functionality apply. IGNITE NUCLEON scores with a breathable hip pad that distributes the load evenly on the hip and is protected against abrasion from the outside with a protective sliding plate. The correct position of the sternal and dorsal fall arrest eyelet can be perfectly adjusted to the user. Leg pads are interchangeable if required. An integrated fall indicator and innovative stainless steel OKTALOCK buckles provide additional safety. Excess webbing is no longer a nuisance thanks to practical webbing fixation. The material loops and tool eyelets are used to accommodate tools.
- Lightweight and comfortable to wear.
- Sliding plate against abrasion.
- Breathable hip pads.
(0 reviews) -
Height SafetyGRIPPS Adjustable Two-Way Radio Holster
Compatible with virtually every Two-Way Radio on the market, the Adjustable Radio Holster is also compatible with other small electronic devices such as phones and cameras.
Easily mounted to either work belts or harnesses, the Adjustable Radio Holster uses a two-way Velcro mounting sleeve to secure itself to the user.
Use in conjunction with a GRIPPS® Coil E-Tether With E-Catch.
Key Features
- Compatible with all standard work belts.
- Fully adjustable to be compatible with virtually all Two-Way Radios.
- Suitable for use with all small electronic devices such as phones & cameras.
- Easily mountable to work belts or harnesses via a two-way Velcro mounting sleeve.
Kit Contents
- 1 x Two-Way Radio Holster
- 1 x Non-Conductive Coil E-Tether With Poly Clip
- 1 x E-Catch
Specifications
- Max Load: 0.5kg / 1.1lbs
- CONFORMS TO ANSI/ISEA 121-2018
(0 reviews) -
AnchorsLINQ Anchor Tetha V-Bar Straight 500mm
- Code HSTBS500
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 500mm used for Trimdeck or Custom Orb roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
HarnessesSkylotec Ignite Proton Wind
The IGNITE PROTON WIND features all the same attributes as the PROTON but with the following additions to this already ‚state of the Art‘ harness;
· Synthetic rear protection plate on the rear of the AIRPAD waist belt. Provides protection to the AIRPAD in the tight confines of a wind turbine ladder or even general work at height applications.
· Chest eyelet for belay, but also for rescue
· Alloy Dorsal & Sternal attachment points
· Alloy Limited Fall Arrest attachment point on the centre front of the waist belt.
· Adjustable Confined Space loops
(0 reviews)
