Machinery & Workshop Tools

• 350mm Tungsten Carbide Tipped blade.
• Saves time & money giving cool cuts that need little to no finishing, eliminating any need for grinding or cool down time.
• The fully enclosed retractable guard increases user safety.
• Heavy-duty vice 90° – 45°.
• Pipe vice attachment.
• For cutting mild steel and aluminium.
• 12 months warranty.
• Supplied with Tungsten Carbide Tipped mild steel blade.

• Motor: 2200W, 3.0hp Single Phase 240V
• Blade Speed: Single Speed 1450rpm
• Blade Size: 350mm
• Blade Bore: 25.4mm
• Weight: 29kg

90° Cutting Capacity:

• Solid Round: 25mm
• Hollow Round: 120mm
• Square: 120mm
• Rectangle: 120 x 120mm

45° Right Cutting Capacity:

• Solid Round: 25mm
• Hollow Round: 90mm
• Square: 90mm
• Rectangle: 120 x 90mm

Replacement Blades:

• SSBL350-MS for mild steel to 25.4mnm
• SSBL350-TS for thin mild steel to 6mm
• SSBL350-AL for aluminium to 25.4mm

Suitable for air/fume extraction or blowing fresh air. Ideal ventilation for workshops and confined areas.
Large capacity motor creating a very high flow rate.
Specially designed axial propeller.
High static pressure

Blade Diameter: 600mm
Flow Rate: 290m³/min
Motor: 2000W 240V
15A plug
Speed: 1400rpm
Noise 20cm From Cover: 102dBA
Weight: 69.0kg

Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.

Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)

Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 375W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 325
Table Size / Base Size (mm): 290 / 420×250
Column Diameter (mm): 72
Height (mm): 980
N.W. / G.W. (kg): 43 / 45

Drill press vice to suit: VDP102
Cross slide vice to suit: TM130-100

Powerful 600W Induction Motor.
25mm width grinding wheels with 36 and 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Heavy Duty tool rests for maximum user control.
Large eyes shields for increased user safety.

 

Motor Power: 600W
Speed: 2980RPM
Wheel Size: 200mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 16.7kg

The Holemaker Pro 65 is designed to deliver exceptional value for money and return on investment, for both the machine and annular cutters. Every aspect of this machine has been designed to give zero lateral movement of the Annular Cutter, and constant RPM, meaning this machine will give massively increased cutter life – A very important factor for any high volume steel fabrication workshop.

Features

• European made machine
• New 1600 watt Italian motor
• Dual rail slide system increases machine rigidity and cutter life
• Through cutter coolant system
• Feed handles can be placed on both sides
• Supplied in a blow mould carry case

Specifications

• Capacity ( Diameter ): 65mm
• Capacity ( Depth ): 75mm
• 3/4″ Weldon shank tool holder
• 1600 Watt 240V Motor
• 2 Speed gearbox (160 / 390rpm)
• Lightweight, only 17kg
• 11000Nm Magnetic dead lift on 25mm steel plate
• 95mm Stroke
• Height 418mm min / 513mm max

Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.

Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)

Drilling Capacity (mm): 20mm (3/4″)
Spindle Taper: #3MT
Chuck: 5-20mm B22
Motor Power: 750W 240V
Spindle Travel (mm): 85
Speed: 12 Speed 280-2380
Swing (mm): 360
Table Size / Base Size (mm): 290×290 / 460×272
Column Diameter (mm): 80
T-Slot Size: 16mm
Height (mm): 1600
N.W. / G.W. (kg): 64 / 68

Drill press vice to suit: VDP102 or VDP150
Cross slide vice to suit: TM130-100

All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.

• Powerful 4 Stroke OHV engines
• Low Oil Sensor
• Digital Multimeter Display
• Large Capacity Fuel Tanks
• 2 Year Trade Warranty

The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered.

Complete with a heavy duty handle and wheel kit, IP66 rated power outlets and RCD (Residual Current Device.), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power.

• Engine HP: 17HP
• KVA: 10
• Max Watts: 8,000
• Rated Watts: 7,500
• Noise @ 7m Full Load: 80dB
• Outlets: 2 x IP66 15A
• Fuel Tank: 25L
• Running Time – 50% Load: 10 hours
• Starting System: Electric w/ Remote
• Handle & Wheel Kit: Yes
• Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
• Net Weight: 95Kg

The FF175 Fan Forced Space Diesel Heater produces 175,000 BTU or 51.3KW of heat.  The unit requires 240v power to run the fan and the spark transformer.

This forced air heater has a thermostat control where one can set the unit to run up to a predetermined temperature.  When the air temperature reaches this level, the heater automatically shuts off.  Equally when the temperature drops below the thermostat setting, the heater automatically turns back on.  Along with the thermostat, the diesel heater has a digital display showing the ambient air temperature.

The heater has a 49 litre fuel tank allowing for a runtime of approximately 10 hours.  Kerosine can also be used as fuel for this heater.

The PT70SSPlus Diesel Heater is a quiet alternative to what has been the more traditional Fan Forced Diesel space heaters.  The machine has a very gentle and quiet fan.  Consequently, the fan  operates to disperse the heat on the front face of the unit.

With fuel consumption of only 1.9 l/h, the 15 litre fuel tank gives a run time of approximately 7 hours.  In addition, this is now further assisted by a Thermostat control on the heater.  As a result, the digital display shows the current ambient air temperature.

The unit can also run on Kerosine fuel for a cleaner and hotter burn.

Please note: The video shown in the VIDEO tab is the older PT70SS model.  That particular model is very similar except it had a 12 litre fuel tank, 6 hours run time and no thermostat control.