Additional information
| Weight | 1.5 kg |
|---|---|
| Dimensions | 30 × 5 × 15 cm |
SKYLOTEC Claw
Made of high-quality stainless steel, the CLAW steel rope runner is suitable for vertical access to higher or lower workplaces on arrester systems with 8-10 mm or 5/16 to 3/8 inch stainless steel ropes. It is particularly characterised by its excellent running properties, which allow fatigue-free ascent and descent. The fall arrester that runs along has a well thought-out 3-fold safety device: the internal mechanical lock prevents it from being put on incorrectly, the external mechanical lock only allows it to be opened with both hands. In addition, a skull and crossbones symbol warns the user if the rope is put on incorrectly. If the climber slips or falls, CLAW locks immediately and the strap energy absorber reduces the forces. CLAW is certified to EN 353-1:2014+A1:2017 and ANSI Z359.16:2016, ANSI/ASSE A14.3-08, CSA Z259.2.5-17, OSHA and secures a maximum of one person weighing 50 to 150 kg.
– High-quality steel rope runner made of stainless steel.
– Fatigue-free ascent and descent
– Sophisticated 3-fold safety device
Related products
-
AnchorsLINQ Anchor Tetha V-Bar Straight 500mm
- Code HSTBS500
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 500mm used for Trimdeck or Custom Orb roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
AnchorsLINQ Anchor Tetha V-Bar Straight 280mm
- Code HSTBS280
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 280mm size all purpose metal roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
Height SafetyLINQ Elite Single Leg Elasticated Lanyard with Hardware
- WLE1- Single Leg Elasticated Lanyard + hardware (see list below)
- An exclusive Extended Length Energy Absorber (ELEA) designed to protect a worker of up to 160kg including tools and equipment.
- Drop forged lanyard hardware
- Stitching patterns are sewn by computer controlled bar tacking machinery for precision using UV resistant high tenacity polyester yarn with 100 newton (10kg) breaking strength.
- Unique THETA stitch pattern has 423 stitches resulting in a strength that matches the lanyards webbing strength.
- Unique stretchable lanyard design that minimises length of lanyard, preventing tripping or snagging.
- Australian designed, engineered, and made.
- Webbing Tenacity= 23kN.
- Webbing is UV rated to meet AS/NZS 1891.1 standard
- THETA stitch pattern (equals 3300kg strength). Engineered to match webbing strength to ensure no weak point in the harness assembly.
- BSI Certified and approved to AS/NZS 1891.1
- SN – Snap Hook x2
(0 reviews) -
Height SafetyLINQ Karabiner Double Action Steel Alloy 19mm
- Code KDASA19
- Opening: 19mm
- Weight: 175gm
- Rating: 25kN
(0 reviews)