Greasing/Lubricants & Equipment

Flow rates of up to 10LPM
Self-priming rotary vane pump
Supplied inclusive of a 2 metre battery connection cable with clips, 4 metre 3/4″ diameter oil delivery hose, on/off control valve and intake hose filter
Duty cycle of 30 minutes on & 30 minutes off

Coupler – Std Button Head Push-on, Swivelling

• Push-on button head swiveling coupler
• Suits 5/8″ hex button head nipples

90  push on grease gun coupler

• Industrial quality grease gun coupler suitable for standard hydraulic grease nipples

• 1/8″ BSP(f) thread

• Fits most grease gun types: manual, pneumatic and battery powered grease guns

• Compact design enables access to difficult to reach lube points

• Poly seal fits most grease nipples

• Length of 41mm

• Weight of 26gm

Quick Release Grease Gun Coupler

Quick Release Grease Gun Coupler

90deg Push On Grease Coupler 1/8″ NPT

 • Industrial quality grease gun coupler suitable for standard hydraulic grease nipples 

• 1/8” NPT thread 

• Fits most grease gun types: manual, pneumatic and battery powered grease guns 

• Compact design enables access to difficult to reach lube points 

• Poly seal fits most grease nipples 

• Length of 41mm 

• Weight of 26gm 

Coupler – Slim-line, 14mm, 10,000 psi

• Alemite USA made
• 14mm Diameter
• Complete with built-in check valve
• Rated to 10,000 psi

The AFP12-40LP is a premium quality 12 volt diesel transfer pump only model designed and tested for optimum performance and reliability in the harsh Australian environment. It is a perfect and economical alternative to  manual pumps. The AFP12A-40LP has a flowrate of 40 ltr/ min (free flow) and has a 30 minute duty cycle. The Macnaught range of electric diesel pumps are ideal for quick reliable transfer of Diesel and Kerosene from bulk fuel tanks, service trucks, utes, 205ltr drums and IBC(intermediate bulk containers)

The 240V Diesel Mini Bowser offers a new pump to satisfy operators looking for a robust unit that effectively delivers high volume diesel. This compact unit comes as a complete package that allows refuelling at flow rates up to 100LPM. Equipped with an easy to use, accurate mechanical meter that can be calibrated on-site, this unit also has a smart on/off switch integrated into the nozzle holder. Extremely versatile, the bowser can be installed directly onto a wall or to an existing structure.

• Suitable for Diesel use only
• Flow rate up to 100LPM
• Inlet/Outlet: 1″ BSP(F)
• 30 minute duty cycle
• Built-in nozzle holder with on/off switch
• IP55 protection
• 240V pump with meter
• 4-digit reset total
• 8-digit accumulative total
• 6m x 1″ delivery hose with automatic nozzle
• 1″ x 2m suction hose

Air Operated Pump Kit designed to dispense directly from 205L drums or tanks.

• This kit allows direct dispensing from drum (205L/54 gal drum)
• Suitable for oils and fluids up to SAE 140 viscosity
• Delivery output up to 14LPM viscosity dependant
• Air inlet: 1/4″ BSP(F)
• Fluid outlet: 1/2″ BSP(F)
• Kit supplied with 3:1 ratio pump with bung adaptor, 3m x 12.5mm delivery hose, metered oil control gun with fitted rigid extension with non-drip nozzle and drum bung wrench (Aluminium 2″- 3/4″)
• Outlet Hose Length – 3m (10’ft) x 12.5mm 1/2″
• Note: Air lubricator supplied

The MAOP20 All-Purpose 20L Oil Transfer Pump is designed for dispensing most service fluids including engine, gear, transmission, hydraulic and some engine coolants from 20L – 25L drums. An extendable suction tube and two additional bung adaptors ensure that the expanding range of different size and types of drums are easily catered for. Delivery on the down-stoke makes this pump easy to use especially when the drum is low on fluid. An extra-long clear delivery hose gives easy identification of the fluid type and allows better reach into difficult areas.

The Chemical Rotary Pump is made from Polyproplene with Ryton Rotors and has Polypropylene spout, delivery hose and moulded nozzle.

• 1″ BSP (F) inlet
• 30mm o.d. spout
• up to 120 LPM flow rate, depending on installation
• No spare parts available

The K29 FLEXIGUN® is a classic grease gun that incorporates a unique variable stroke piston and valve arrangement for true one handed operation. The push in handle is easy to use and requires much less effort to operate. Increased pressure can be produced by short strokes (low volume) or high volume using a long stroke (low pressure). Heavy duty pistol grip construction with comfortable ergonomics to suit 450g grease cartridges, bulk filling or Macnaught J3 grease transfer pump loading. The K29 is fully repairable with a strong die cast head and heavy gauge steel barrel for extra long service life.