[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

GRIPPS Electrical Trade Kit

An end-to-end solution covering the entire suite of hand and power tools used by Electricians.

Tethers up to 31 tools.

Kit Contents

  • 1 x H02056 Tape Measure Catch
  • 1 x H10100 Bungee Tether Dual-Action 5.0kg
  • 1 x H01068 Coil tether Single-Action
  • 1 x H01021 Swivel Catch
  • 10 x H01007 Tool Catch (Non-Conductive)
  • 1 x H01010 V-Gripp Tape
  • 1 x H01067 Webbing Wrist Tether Single-Action
  • 1 x H01062 Coil Single-Action Wrist Tether (Non-Conductive)
  • 1 x H01142 Belt-Loop Anchor
  • 1 x H01085-M Slip-On Wrist Anchor (Medium)
  • 10 x H01030 Screwlock Cable – 3.0mm x 12cm / 0.1″ x 4.75″
  • 1 x H03048 Little Gripper Kit

In Stock
Categories: , , ,

Additional information

Weight 0.8 kg
Dimensions 24 × 21 × 9 cm

Related products

  • Anchors

    LINQ Anchor Tetha T-Bar
    • Code HSTBA
    • The LINQ Tetha T Bar anchor plates are engineered for extreme workplace situations.
    • Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
    • (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
    • An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
    • Compact design and lightweight materials provide a tried and tested safety solution
    • Rated for up to a 140kg user
    • Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
    • The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
    • Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
    • Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
    • Suitable for Fall Arrest application on metal roofs.
    • To be used on metal clad roofs only
    • Conforms to ASNZS 1891.4 requirements
    (0 reviews)
    Add to Quote
  • Height Safety

    LINQ Karabiner Triple Action Steel Alloy 26mm
    • Code KTASA26
    • Opening: 26mm
    • Weight: 275gm
    • Rating: 30kN
    • Width: 82mm
    • Length: 123mm
    (0 reviews)
    Add to Quote
  • Anchors

    LINQ Anchor Tetha V-Bar Straight 280mm
    • Code HSTBS280
    • The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
    • Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
    • (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
    • An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
    • Compact design and lightweight materials provide a tried and tested safety solution
    • Rated for up to a 140kg user
    • Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
    • The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
    • Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
    • Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
    • Provides safe 360° work area
    • For use on metal or tile roofs
    • 280mm size all purpose metal roofs
    • Conforms to ASNZS 1891.4 requirements
    (0 reviews)
    Add to Quote
    Height Safety

    LINQ Harness Supreme EDI Tower Worker – Standard (M-L)
    • Code H402
    • Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment.
    • Liqui-Pel Technology for liquid protection, also easier to clean the harness.
    • High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation.
    • Retro-Reflective Thread in webbing for improved visibility in low light.
    • Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices.
    • Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head.
    • Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements.
    • Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker.
    • Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap.
    • Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use.
    • Padded Sub Pelvic Seat for Pole Strap restraint High Comfort spec.
    • Large Pole Strap Side Loops for ease of connecting Pole Strap (work positioning).
    • Adjustable Waist Belt with tool loop attachments.
    • Quick Release Buckles. Padding under buckles.
    • Forward placed pole strap attachment points makes for easier to reach connection.
    • Service Pouch on back.
    • Comes with Harness Bag PART CODE: NBHAR.
    (0 reviews)
    Add to Quote