32mm
Showing 1–36 of 46 results
-
Grade 100 Fittings
AUSTLIFT G100 Chain Connector Yoke
- Quenched and Tempered Alloy Steel.
- At least 25% greater WLL than traditional G80 products.
- Manufactured in accordance with EN 1677- 1 and ASTM A952/ A952M.
- Certified by DGUV GS-OA-15-05
- Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
- Design Factor 4:1.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL. Suitable for use with both Grade 80 and Grade 100 chain.
(0 reviews) -
Grade 100 Fittings
AUSTLIFT G100 Eye Grab Hook Yoke
- Quenched and Tempered Alloy Steel.
- At least 25% greater WLL than traditional G80 products.
- Manufactured in accordance with DIN 5692, EN 1677-1 and ASTM A952/A 952M.
- Certified by DGUV GS-MO-15-05.
- Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
- Design Factor 4:1.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL.
- Tempering temperature minimum 400°C
- Not for use with Omega Link
- Enables full WLL while in use, thanks to supporting wings which prevent chain link deformation.
(0 reviews) -
Grade 100 Fittings
AUSTLIFT G100 Sling Hook Eye w/Latch Yoke
- Quenched and Tempered Alloy Steel.
- At least 25% greater WLL than traditional G80 products.
- Manufactured in accordance with EN 1677- 2 and ASME B30.26, ASME B30.10, PAS1061.
- Certified by DGUV GS-OA-15-05
- Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
- Design Factor 4:1.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL.
- Tempering temperature minimum 400°C
- Magnaflux crack detection is performed 100% on each batch.
(0 reviews) -
Grade 80 Fittings
AUSTLIFT G80 Chain Connector Type CL
Austlift chain connectors are commonly used to connect head rings, chain, hooks and other lifting components for chain slings and variable type slings.
• Marked with chain sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.
• Spare pin and studs are available.(0 reviews) -
Grade 80 Fittings
AUSTLIFT G80 Grab Hook Eye Type GE
GE type eye grab hook provides the flexibility to shorten chain sling and can be used for back-hooking. Austlift grab hooks come with supporting lugs to allow no reduction of the working load limit. The eye is designed for easy connection of chain connector.
• Marked with sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.(0 reviews) -
Grade 80 Fittings
AUSTLIFT G80 Grab Hook Eye Type Yoke
Not for use with Omega Link Item.
No reduction of working load limit, thanks to supporting wings which prevent chain link deformation.(0 reviews) -
Grade 80 Fittings
AUSTLIFT G80 Self Locking Hook Eye Type LE
Austlift LE type eye self-locking hook allows the hook to remain open until the load is engaged. The hook will not open until the trigger at the back is pressed. The eye style allows easy connection to chain connectors, shackles and wire rope slings.
• Marked with chain sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.
• Spare trigger kits are available.(0 reviews) -
Grade 80 Fittings
AUSTLIFT G80 Sling Hook Eye c/w Safety Latch Type SE
Austlift SE type eye sling hooks are a general purpose hook suitable for most slinging applications. They come with a heavy duty latch for added safety. Eye type allows easy connection to coup links and can be
attached to lifting apparatus.
• Marked with chain sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.
• Spare safety latch kits are available.(0 reviews) -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M1.6
Split Pin Mild Steel Zinc Metric M1.6
(0 reviews) -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M2
Split Pin Mild Steel Zinc Metric M2
(0 reviews) -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M2.5
Split Pin Mild Steel Zinc Metric M2.5
(0 reviews) -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M3.2
Split Pin Mild Steel Zinc Metric M3.2
(0 reviews) -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M4
Split Pin Mild Steel Zinc Metric M4
(0 reviews) -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M5
Split Pin Mild Steel Zinc Metric M5
(0 reviews) -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M6.3
Split Pin Mild Steel Zinc Metric M6.3
(0 reviews) -
Chipboard
ICCONS 10g Chipboard Screws Galvanised x 250 Bulk Qty
10g x 75mm Bulk Quantity – 250
Quality chipboard screws for very soft timbers, MDF or particleboard. Aggressive coarse thread accompanied by a thin shank ensures the screws bite firmly into soft base materials and minimise strip out. Aggressive ribbed head (6 nib) for the easiest countersinking of the chipboard screw head. Available in zinc and galvanised finishes, these screws are commonly used in applications such as furniture construction, cabinet making, office partitioning and formwork.
(0 reviews) -
Chipboard
ICCONS 10g Chipboard Screws Zinc x 250 Bulk Qty
10g x 75mm Bulk Quantity – 250
Quality chipboard screws for very soft timbers, MDF or particleboard. Aggressive coarse thread accompanied by a thin shank ensures the screws bite firmly into soft base materials and minimise strip out. Aggressive ribbed head (6 nib) for the easiest countersinking of the chipboard screw head. Available in zinc and galvanised finishes, these screws are commonly used in applications such as furniture construction, cabinet making, office partitioning and formwork.
(0 reviews) -
5/16" Hex Head
ICCONS 12g Metal Screws Galvanised
20mm – Quantity: 50
32mm – Quantity: 50
42mm – Quantity: 20
50mm – Quantity: 20
65mm – Quantity: 20
85mm – Quantity: 20
Self-drilling hex head screw for fastening through mild steel in metal brackets, components, steel sections and assemblies. This screw is an all-rounder with countless applications in the steel construction field, however the coarse thread has a slightly faster install than its fine thread counterpart leading it to have fast installation characteristics. The flanged hex head lends to high pull-out strength and available in both zinc and galvanised coating making them perfect for internal and external applications. ICCONS self drilling hex head screw has a hardened steel point (tek point), and coarse thread enabling the screw to drill and tap its own thread, without the need to pre-drill (please see screw self drilling capacities).
(0 reviews) -
5/16" Hex Head
ICCONS 12g Metal Screws Galvanised x 1000 Bulk Qty
12g x 85mm – Quantity: 1000
Self-drilling hex head screw for fastening through mild steel in metal brackets, components, steel sections and assemblies. This screw is an all-rounder with countless applications in the steel construction field, however the coarse thread has a slightly faster install than its fine thread counterpart leading it to have fast installation characteristics. The flanged hex head lends to high pull-out strength and available in both zinc and galvanised coating making them perfect for internal and external applications. ICCONS self drilling hex head screw has a hardened steel point (tek point), and coarse thread enabling the screw to drill and tap its own thread, without the need to pre-drill (please see screw self drilling capacities).
(0 reviews) -
Bugle Head
ICCONS 6g Metal Screw Zinc
25mm Quantity – 100
32mm Quantity – 100
45mm Quantity – 50
Self drilling bugle head screw is ideal for fixing timber, plywood, and OSB panels to steel studs. The bugle head results in a flush finish whilst the fine thread bites into the fixing material and the steel stud. These loose screws are handy for non-repetitive jobs, whereases the collated alternative accompanied by our collated screw gun (ASD-1800L) is ideal for rapid fixture of timber, plywood, and OSB panels to steel studs.
(0 reviews) -
Plasterboard
ICCONS 6g Plasterboard Screw Bugle Head Zinc
Quantity – 100
Needle Point Bugle Head Fine Thread screws are ideal for fixing plasterboard to thin steel substrates such as walls and ceilings (ensure steel thickness is no more than 0.75mm). These needle point screws come equip with a No. 2 Philips drive and fine thread for self drilling into thin gauge steel.
(0 reviews) -
Plasterboard
ICCONS 6g Plasterboard Screw Bugle Head Zinc x 1000 Bulk Qty
6g x 25mm Quantity – 1000
Needle Point Bugle Head Fine Thread screws are ideal for fixing plasterboard to thin steel substrates such as walls and ceilings (ensure steel thickness is no more than 0.75mm). These needle point screws come equip with a No. 2 Philips drive and fine thread for self drilling into thin gauge steel.
(0 reviews) -
Chipboard
ICCONS 8g Chipboard Screws Galvanised
Quantity: 100
Quality chipboard screws for very soft timbers, MDF or particleboard. Aggressive coarse thread accompanied by a thin shank ensures the screws bite firmly into soft base materials and minimise strip out. Aggressive ribbed head (6 nib) for the easiest countersinking of the chipboard screw head. Available in zinc and galvanised finishes, these screws are commonly used in applications such as furniture construction, cabinet making, office partitioning and formwork.
(0 reviews) -
Chipboard
ICCONS 8g Chipboard Screws Galvanised x 1000 Bulk Qty
Bulk Quantity – 1000
Quality chipboard screws for very soft timbers, MDF or particleboard. Aggressive coarse thread accompanied by a thin shank ensures the screws bite firmly into soft base materials and minimise strip out. Aggressive ribbed head (6 nib) for the easiest countersinking of the chipboard screw head. Available in zinc and galvanised finishes, these screws are commonly used in applications such as furniture construction, cabinet making, office partitioning and formwork.
(0 reviews) -
Chipboard
ICCONS 8g Chipboard Screws Zinc
Quantity: 100
Quality chipboard screws for very soft timbers, MDF or particleboard. Aggressive coarse thread accompanied by a thin shank ensures the screws bite firmly into soft base materials and minimise strip out. Aggressive ribbed head (6 nib) for the easiest countersinking of the chipboard screw head. Available in zinc and galvanised finishes, these screws are commonly used in applications such as furniture construction, cabinet making, office partitioning and formwork.
(0 reviews) -
Chipboard
ICCONS 8g Chipboard Screws Zinc x 1000 Bulk Qty
Bulk Quantity – 1000
Quality chipboard screws for very soft timbers, MDF or particleboard. Aggressive coarse thread accompanied by a thin shank ensures the screws bite firmly into soft base materials and minimise strip out. Aggressive ribbed head (6 nib) for the easiest countersinking of the chipboard screw head. Available in zinc and galvanised finishes, these screws are commonly used in applications such as furniture construction, cabinet making, office partitioning and formwork.
(0 reviews) -
Plasterboard
ICCONS Dog Bites SQ2 Drive
Quantity 100
ICCONS Dog-Bites are a universal fixing designed for use in all types of base material including concrete, stone, brick, plasterboard and timber. Its unique thread design delivers effortless installation in one easy step. Available in pan head with either a PH2 Phillips or SQ2 square drive, the Dog-Bite is ideal for any light duty fixing application such as signs, shelf brackets and lighting and electrical fixtures.
(0 reviews) -
1/2" Impact Sockets
ITM 1/2″ Drive Deep Metric
1/2″ Drive 6pt Deep Impact Socket Metric
8mm-36mm Available
(0 reviews) -
1/2" Impact Sockets
ITM 1/2″ Drive Metric
1/2″ Drive 6pt Impact Socket Metric
8mm-36mm Available
(0 reviews) -
Annular Cutter/Sets
ITM 25mm Depth Annular Cutter
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews) -
3/4" Impact Sockets
ITM 3/4″ Drive Deep Metric
3/4″ Drive 6pt Deep Impact Socket Metric
19mm-65mm
(0 reviews)