CHEMTOOLS Straight Cutting Compound 500g
Chemtools Straight Cutting Compound 500g (CT-SCC)
A high performance and efficient lubrication for manual pipe threading, hacksawing, tapping and reaming. The active compound will slowly melt as frictional heat is generated during use.
- Prolongs tool life
- Does not corrode steel or affect aluminium
- Recommended applications: Steel, stainless steel, aluminium. Can be used on copper and brass, however the surface may darken
Related products
-
Industrial
CRC Tac2 Adhesive Lubricant 300g
CRC TAC2 is a tough adhesive lubricant that bonds to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that lead to metal fatigue.
Recommended for all types of chain drives, open gears, car wash equipment, bottling plant, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks, wire ropes and marine applications.
Resists cold, hot and salt water wash off and high temperature sling off. Reduces wear and friction. Lubricates effectively chain drives, open gears, pulleys, wire ropes, conveyors. Penetrates vital chain pin and bushing areas and wire rope strands.
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sikaflex®-291
Multifunctional adhesive sealant for marine applicationsSikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Low odour
- Non-corrosive
- Can be over painted
- Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sika® Filler-107
Ready to use water based general purpose surface filler for use in wet areasSika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
- Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Advantages
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Quick drying
- Not sensitive to moisture
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sikaflex®-252
Elastic adhesive for vehicle assembly bondingSikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Can be painted
- Vibration-damping
- Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews)