CHEMTOOLS Straight Cutting Compound 500g
Chemtools Straight Cutting Compound 500g (CT-SCC)
A high performance and efficient lubrication for manual pipe threading, hacksawing, tapping and reaming. The active compound will slowly melt as frictional heat is generated during use.
- Prolongs tool life
- Does not corrode steel or affect aluminium
- Recommended applications: Steel, stainless steel, aluminium. Can be used on copper and brass, however the surface may darken
Related products
-
Industrial Chemical Lubricants & Adhesives
SIKA SikaSeal® Roof & Gutter
1-component neutral cure roof and gutter silicone sealantSikaSeal® Roof & Gutter is a one-component, neutral curing, low odour silicone sealant with excellent adhesion to most construction surfaces.
SikaSeal® Roof & Gutter cures through the absorption of atmospheric moisture to give a tough but flexible waterproof seal.- Neutral cure
- Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
- Non-sag
- Roofs
- Gutters
- Polycarbonate roof sheeting
- Around plumbing fixtures and penetrations
- General interior & exterior sealing around the home
Advantages
- Neutral cure
- Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
- Non-sag
- Great tooling characteristics
- Interior and exterior usage
- Fast curing
- Minimum movement capability ±25%
- High temperature resistance (-40°c to +150°c)
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sika® Filler-107
Ready to use water based general purpose surface filler for use in wet areasSika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
- Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Advantages
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Quick drying
- Not sensitive to moisture
(0 reviews) -
Industrial
CRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sika® Primer-209 D
Pigmented, solvent based primer for paints and plasticsSika® Primer-209 D is a solvent-based, black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation step on certain plastic substrates.Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS, acrylics, alkyds/melamine, powder coatings and baking varnishes.
Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews)