Meters
Showing 1–36 of 42 results
-
Insulation TestersVOLT SAFETY 1000V Analog Insulation Tester 3132A – Kyoritsu
The Kyoritsu 3132A Analog Insulation and Continuity Tester is a versatile instrument designed for assessing the insulation resistance and continuity of electrical circuits and devices. Featuring a clear analog display, it allows users to easily read measurements across a range of insulation resistance values, typically from 0.01 MΩ to 2000 MΩ, with selectable test voltages of 250V, 500V, and 1000V. This Analog Insulation Tester is ideal for electricians and technicians, providing reliable performance in various applications, including motor windings, cables, and equipment insulation checks. Its compact design and rugged construction make it suitable for both field and workshop environments, ensuring durability and ease of use in a variety of testing scenarios.
Key Features:
- Dimensions: 106mm x 160mm x 72mm
- Weight: 560g
- Test Voltage: 250V /500V /1000V
- Measuring Range: 100MΩ, 200MΩ, 400MΩ
- Voltage Measuring Range: 0~600V AC
- Includes:
- 7122B Test leads
- 9074 Cord Case
- 8923 Fuse(0.5A/600V) × 1 (included), 1 (spare)
- 9121 Shoulder Strap
- R6 (AA) × 6
- Instruction Manual
- Dust and Drip-proof construction
- Designed to meet IEC 61010-1 and IEC 61557 safety standards
- Easy to read scale means no confusing digital readings.
- 1mA rated test current at the minimum resistance
- 200mA measuring current on continuity testing
- Automatic discharge of circuit capacitance (Any charge stored in the circuit under test will be automatically discharged after testing)
- Live circuit warning buzzer and neon lamp
- Small and lightweight. Shock resistant new case material
- AC voltmeter with linear, easy-to-read scale
Standards:
- CAT III 600V
- IEC 61010-1
- IEC 61010-2-034
- IEC 61557-1,2,4
(0 reviews) -
MetersVOLT SAFETY 100A MicroOhm Meter MI 3252 – Metrel
Metrel’s 100A MicroOhm Meter is a portable low resistance ohmmeter used to measure low contact resistances of circuit breakers, switches and busbar joints using test current from 100 mA to 100 A. Used 4-lead Kelvin testing method ensures very high accuracy of results (0.25%) due to elimination of test leads resistance. The instrument can be powered from both mains supply and internal battery. PC SW HVLink PRO supplied as a standard accessory enables downloading, analysis and export of test results and printing of test reports.
Key Features:
- Includes:
- Instrument MI 3252 MicroOhm 100A
- Current test lead with crocodile clip, 5m, 25 mm2, 2 pcs
- Potential test lead, 5 m, 2 pcs (red, black)
- Test probe, 2 pcs (red, black)
- Crocodile clip, 2 pcs (red, black)
- Mains cable
- RS232 cable
- USB cable
- Bag for accessories
- Manufacturer Calibration certificate
- Instruction manual
- PC SW 0113 HVLink PRO
- Instrument Dimensions: 410mm x 175mm x 370 mm
- Instrument Weight (with batteries, without accessories): 11.8kg
- High ingress protection rating of IP64
- Accurate to 0.1 nΩ best resolution with 0.25% accuracy
- Bar graph on screen resistance bar graph
- Battery powered with more than 1000 measurements with 10 A test current can be performed when powered by internal battery only
- Safe and sustains external voltages in case of wrong connection, protection level (CAT IV / 50V); automatically detects continuity in current circuit
- Single and continuous measuring modes
- Custom limits can be set for PASS or FAIL evaluation of test result
- Portable rugged carrying case with a handle and lightweight design (less than 12kg) enable easy moving the instrument between sites
- Built-in memory enables storage of up to 1000 test results
- Download test results via RS232 or USB cable directly to the PC with the help of the HVLink PRO software
Standards:
- CAT IV 50V
- EN 61010-1
(0 reviews) - Includes:
-
MetersVOLT SAFETY 10A MicroOhm Meter MI 3250 – Metrel
Metrel’s 10A MicroOhm Meter is a portable low resistance ohmmeter for measuring low resistances of breakers and switches, busbars, cable joints, small to medium sized transformer and motor windings for industrial application, etc., with test current up to 10A. The used 4-lead Kelvin testing method together with automatic bidirectional procedure ensure very high accuracy of test results (0.25%). This 10A MicroOhm Meter can be powered by mains or internal rechargeable batteries. Test results can be stored on the instrument and with PC software HVLink PRO that is supplied as a part of standard set enables transfer of measured results to PC where they can be analysed or printed.
Key Features:
- Includes:
- Instrument MI 3250 MicroOhm 10A
- Large Kelvin test clip, 2 pcs
- Test cable with Kelvin Probe, 2 pcs
- Test cable, 2.5 m, 4 pcs (2 x black, 2 x red)
- Crocodile clip, 4 pcs (2 x black, 2 x red)
- Test probe, 2 pcs (black)
- Mains cable
- USB cable and RS232 cable
- NiMH rechargeable batteries, type C, 6 pcs
- Bag for accessories
- Manufacturer Calibration certificate
- Instruction manual
- PC SW 0113 HVLink PRO
- Instrument Dimensions: 310mm x 130mm x 250 mm
- Instrument Weight (with batteries, without accessories): 2.8kg
- Four measuring modes: Automatic, single, continuous and inductive
- Accurate to 0.1 nΩ best resolution with 0.25% accuracy
- Bar graph on screen resistance bar graph
- Battery powered with more than 1000 measurements with 10A test current can be performed when powered by internal battery only
- Automatic thermal EMF elimination with automatic bidirectional measurement
- Temperature compensation measured resistance can be adjusted according to ambient temperature, which can be entered manually or measured by external probe
- Custom limits can be set for PASS/FAIL evaluation of test results
- Portable, lightweight 3kg design with carry handle and shoulder strap
- Built-in memory enables storage of up to 1000 test results
- Downloadable data and stored test results can be via RS232 or USB interface transferred to the PC with installed HVLink PRO software, which enables downloading, review, analyses and printing of the test results
Standards:
- CAT IV 300V
- EN 61010-1
- EN 61010-031
(0 reviews) - Includes:
-
Insulation TestersVOLT SAFETY 10kV TeraOhm Insulation Tester MI 3211 – Metrel
Metrel’s TeraOhm 10kV Insulation Tester is a high power, portable, battery or mains powered test instrument with excellent IP protection (IP65), designed for analysing insulation resistance by using high DC test voltages of up to 10kV. Because of its robustness (CAT IV measuring category) and high immunity to radiated EM fields, it is best suited for demanding industrial environments. Touch screen or key manipulation via menu-driven LCD enables easy and transparent selection of different measurement methods and easy entry of data. Newly designed test leads have coded banana connectors for proper connection and locking to protect them against unwanted or accidental removal.
Key Features:
- Includes:
- Instrument MI 3211 TeraOhmHP 10kV Insulation Tester
- A 1794 HV test lead, 3m, Black banana plug/Crocodile clip – Shielded, 15kV
- A 1795 HV test lead, 3m, Blue banana plug/Crocodile clip – 15kV
- A 1793 HV test lead, 3m, Red banana plug/Crocodile clip – 15kV
- A 1728 Power cable, 2m, 3×0.75mm2, IEC C13/Type E connector
- A 1727 USB cable TypeA/B
- A 1772 Soft carrying bag, Size: XXL
- Metrel ES Manager BASIC Licence
- SW 1201 Metrel ES Manager (program installation)
- Short form instruction manual
- Manufacturer Calibration certificate
- Instrument Dimensions: 360mm x 160mm x 330mm
- Instrument Weight (with batteries, without accessories): 6.2kg
- Insulation resistance measurements of up to 20TΩ
- Coded banana connectors with locking feature
- Newly designed HV crocodiles with a better grip
- Li-ion battery 4400mAh
- Adjustable test voltage (50V to 10kV) 50V and 100V step
- 8 GB memory SD card for data saving
- Automatic discharge of test object after finished measurement
- Live voltage detection > 30V
- User-friendly and intuitive operation
- High voltage breakdown detection
- Programmable AUTO SEQUENCEs
- Auto adjustment function
- Measurement results in numerical and graphical form
- Isolated RS-232 and USB communication ports, Bluetooth interface
- High EM interferences protection: Input AC current noise rejection 8 mA, input AC voltage noise rejection 1.5kV
Standards:
- CAT IV 600V
- IEC/EN 61010-1
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-034
(0 reviews) - Includes:
-
Insulation TestersVOLT SAFETY 15kV TeraOhm Insulation Tester MI 3215 – Metrel
Metrel’s TeraOhm 15kV Insulation Tester is a high power, portable, battery or mains powered test instrument with excellent IP protection (IP65), designed for analysing insulation resistance by using high DC test voltages of up to 15kV. Because of its robustness (CAT IV measuring category) and high immunity to radiated EM fields, it is best suited for demanding industrial environments. Touch screen or key manipulation via menu-driven LCD enables easy and transparent selection of different measurement methods and easy entry of data. Newly designed test leads have coded banana connectors for proper connection and locking to protect them against unwanted or accidental removal.
Key Features:
- Includes:
- Instrument MI 3215 TeraOhmHP 15kV Insulation Tester
- A 1794 3M HV test lead, 3m, Black banana plug/Crocodile clip – Shielded, 15kV
- A 1795 3M HV test lead, 3m, Blue banana plug/Crocodile clip – 15kV
- A 1793 3M HV test lead, 3m, Red banana plug/Crocodile clip – 15kV
- A 1728 Power cable, 2m, 3×0.75mm2, IEC C13/Type E connector
- A 1727 USB cable TypeA/B
- A 1772 Soft carrying bag Size: XXL
- Metrel ES Manager BASIC Licence
- SW 1201 Metrel ES Manager (program installation)
- Short form instruction manual
- Manufacturer Calibration certificate
- Instrument Dimensions: 360mm x 160mm x 330 mm
- Instrument Weight (with batteries, without accessories): 6.3kg
- Insulation resistance measurements of up to 35TΩ
- Coded banana connectors with locking feature
- Newly designed HV crocodiles with a better grip
- Li-ion battery 4400mAh
- Adjustable test voltage (50V to 15kV) 50V and 100V step
- 8 GB memory SD card for data saving
- Automatic discharge of test object after finished measurement
- Live voltage detection > 30V
- User-friendly and intuitive operation
- High voltage breakdown detection
- Programmable AUTO SEQUENCEs
- Auto adjustment function
- Measurement results in numerical and graphical form
- Isolated RS-232 and USB communication ports, Bluetooth interface
- High EM interferences protection: Input AC current noise rejection 8 mA, input AC voltage noise rejection 1.5kV
Standards:
- CAT IV 1000V
- IEC/EN 61010-1
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-034
(0 reviews) - Includes:
-
Insulation TestersVOLT SAFETY 1kV Analog Insulation Tester 3490 – Hioki
The Hioki 3490 1kV Insulation Tester features all-in-one designs including built-in rugged cases and test lead storage compartments.
The 3490 is a 3-range, 250/500/1000V analogue insulation resistance meter with efficient functions and features to help shorten work time associated with field insulation testing.
Key Features:
- Size: 159mm x 177mm x 53mm
- Operating Temperature: 0C – 40C
- Measures Insulation Resistance (up to 4000 Mega ohms), AC Voltage (up to 600V) and low resistance (up to 30 Ohms)
- 3 Output Voltages for testing – 250VDC, 500VDC and 1000VDC
- Backlit LED to see the analogue screen in low light environments
- Durable 1.2m length test leads to take measurements
- Zero ohm adjustment to ensure correct readings
- Continuity Check at 200mA at 3 Ohm range
Standards:
- CE
- IP40 (Excluding terminals)
- EN61010
- EN612326
- EN61557-1
- EN61557-2
(0 reviews) -
Insulation TestersVOLT SAFETY 1kV Digital Insulation Tester IR4056-20 – Hioki
The Hioki IR4056-20 1kV Insulation Tester features all-in-one designs including built-in rugged cases and test lead storage compartments.
The IR4056 is a 5-range, 50V to 1000V digital insulation resistance tester with efficient functions and features to help shorten work time associated with field insulation testing.
Key Features:
- Operating Temperature: 0C – 40C
- Weight: 600g
- Size: 159mm x 177mm x 53mm
- Includes:
- Test lead L9787
- Neck strap
- Instruction manual
- LR6 (AA) alkaline batteries x 4
- Stable & medium-speed digital readings, 0.8 second response time of PASS/ FAIL decisions
- 5-range testing voltage of 50 V/100 MΩ to 1000 V/4000 MΩ
- Bright LED, luminous LCD, test lead with bright LED lamp to illuminate near hand
- Drop proof onto concrete from 1m
- Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles
- Continuity check via 200 mA testing
Standards:
- EN IEC 63000
- EN IEC 61326-2-2
- EN 61010-031
- EN 61557-1
- EN 61557-2
- EN 61557-4
- EN 61557-10
(0 reviews) -
MetersVOLT SAFETY Analog Earth Tester FT3151 – Hioki
Earthing or grounding electrical equipment is crucial for ensuring safety, protecting lives, and preventing damage to machinery. The FT3151 Analog Earth Tester employs an AC phase differential system to measure earthing resistance, guaranteeing precise readings that are not influenced by earth voltage or auxiliary earthing resistance. Additionally, its new, innovative cord winders make cleanup effortless.
Key features
- Dimensions: 164mm x 119mm x 88mm
- Weight: 760g
- Includes:
- Auxiliary Earthing Rod L9840 (2 piece set)
- Measuring cable L9841 (alligator clip, black 4 m (13.12 ft))
- Measurement Cable L9842-11 (yellow 10 m (32.81 ft), equipped with winder)
- Measurement Cable L9842-22 (red 20 m (65.62 ft), equipped with winder)
- LR6 (AA) Alkaline battery ×6
- Carrying Case C0106
- Instruction manual
- Supports Three-electrode and Two-electrode method (Simple Measurement)
- Wide measurement range from 0 to 1150 Ω, based on EN standard
- Switchable measurement frequency to reduce the effects of power supply harmonics
- Dramatically faster setup that comes with improved grounding rods and cord winders
Standards:
- EN 61010
- EN 61557
- CAT II 300V
(0 reviews) -
Gas DetectorsVOLT SAFETY BW Max XT II Gas Detector – Honeywell
Honeywell’s BW Max XT II Gas Detector is a smart, simple and economical way to ensure compliance.
Key Features:
- Dimensions: 131mm x 70mm x 52 mm
- Weight: 328g
- Alarms: Visual, vibrating, audible
- Detects and measures H2S (Hydrogen Sulfide), CO (Carbon Monoxide), O2 (Oxygen) and LEL (Combustible Gases)
- H2S: 0-200ppm
- CO: 0-1000ppm
- O2: 0-30% vol.
- LEL: 0-100%
- Continuous LCD shows real-time gas concentrations
- Rated to work in extreme environments from -20C to 50C
- 8 – 13 hour battery run time
- 375 hours of datalogging at 15 second intervals
- One button operation with robust, motorised pump
- Compact and lightweight design makes the detector comfortable to wear
- Built-in concussion proof boot
- Compatible with MicroDock II
Standards:
- IP66
- UL Classified Class I, Div. 1, Gr. A, B, C, D
- ATEX: CE, Ex II 1 G Ga Ex ia IIC T4
(0 reviews) -
Gas DetectorsVOLT SAFETY BW MicroClip XL Gas Detector – Honeywell
Honeywell’s BW Microclip XL Gas Detector is the world’s most popular multi-gas portable detector, delivering long runtime and reliability — plus small size, low cost and the easiest user experience.
Key Features:
- Dimensions: 113mm x 60mm x 32 mm
- Weight: 190g
- Alarms: Visual, vibrating, audible
- Detects and measures H2S (Hydrogen Sulfide), CO (Carbon Monoxide), O2 (Oxygen) and LEL (Combustible Gases)
- H2S: 0-100ppm
- CO: 0-500ppm
- O2: 0-30% vol.
- LEL: 0-100%
- Continuous LCD shows real-time gas concentrations
- Rated to work in extreme environments from -20C to 50C
- 18 hour typical battery run time
- One button operation with robust, motorised pump
- Compact and lightweight design makes the detector comfortable to wear
Standards:
- IP68
- ANSI/UL – 913 and ANSI/ISA – 12.13.01 Part 1
- ATEX: CE 0539 g II 1G Ex da ia IIC T4 Ga DEKRA 19ATEX0025 EN 60079-0, EN 60079-1, EN 60079-11, EN 60079-26
(0 reviews) -
Gas DetectorsVOLT SAFETY BW Solo Gas Detector – Honeywell
Honeywell BW Solo Gas Detector is a smart, simple and economical way to measure gases.
Key Features:
- Dimensions: 70mm x 67mm x 36mm
- Weight: 116g
- Alarms: Visual, vibrating, audible
- Detects and measures Oxygen (O2)
- O2: 0-30% v/v
- P&A is available for other models on request
- O2: 0-30% v/v
- Sensor can be replaced in the field to detect required gases
- Continuous LCD shows real-time gas concentrations
- Gas Detector designed to work from -40C to 60C.
- Sensors have different operating ranges. Refer to sensor specifications.
- Typical battery life of 12 months, 6 months for O2
- Six months of datalogging at 5 second intervals
- Compact and lightweight design makes the detector comfortable to wear
- Built-in concussion proof housing
Standards:
- IP66
- UL Classified Class I, Div. 1, Gr. A, B, C, D
- ATEX: : Sira 18ATEX2243 CE 2460 EX II 1G Ex ia IIC T4 Ga
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC Tester 3280-10F – Hioki
Hioki’s 3280-10F AC Tester is a versatile clamp meter designed for accurate and reliable electrical measurements, 1000A AC current and 600V AC/DC voltage. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
Key Features:
- Operating Temperature: -25C – 65C
- Weight: 100g
- Dimensions: 57mm x 175 mm x 16mm
- Includes:
- CR2032 Coin-Shaped lithium battery
- 9398 Carrying Case
- L9208 Test Lead
- Instruction manual
- Power Supply: 1x CR2032 Coin-Shaped lithium battery. continuous use 120 hours
- IP40 dustproof and waterproof (while in storage)
- 1000A AC current measurements to ±1.5%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±1.0%rdg ±3dgt accuracy
- True RMS AC measurements
- Digital backlit display
- CAT IV 300V (Current) / CAT III 600V (Current) / CAT III 300V (Voltage)
Standards:
- CAT IV 300 V (Current)
- CAT III 600 V (Current)
- CAT III 300 V (Voltage)
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC 1000V CAT IV – HT Italia
The HT Italia HT9021 professional clamp meter is designed for DC/AC TRMS current measurement up to 1000A, and DC/AC voltage for achieve safety CAT IV 1000V. The Autopower OFF feature is also available for the meter in order to preserve it’s internal battery charge. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
Key Features:
- Operating Temperature: 0°C – 40°C (32°F – 104°F)
- Weight: 442g (including batteries)
- Dimensions: 252mm x 88mm x 44mm
- Includes:
- 1 x 9V NEDA 1604 IEC 6F22 JIS 006P battery
- Carrying Case
- KIT4413-2 Test leads
- Instruction manual
- Power Supply: 1x 9V battery that lasts up to 200 Hours
- 1000A AC voltage measurement
- 1000V AC/DC voltage measurements
- True RMS AC measurements
- Digital backlit display
- Auto Power Off
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600V
- CAT III 1000V
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC Tester 3280-70F – Hioki
Hioki’s Digital Clamp on Hi-Tester 3280-10F AC/DC with Flexible CT6280 Sensor come together to make the 3280-70F clamp meter set, capable of measuring up to 4200A AC.
Hioki’s 3280-10F AC/DC Tester is a versatile clamp meter designed for accurate and reliable electrical measurements, 1000A AC/DC current and 600V AC/DC voltage. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
The CT6280 Sensor has a large-diameter loop and is ideal for measuring large wires and pairs of wires in small spaces. The sensor is freely bendable and the cable is 800mm in length.
Key Features:
- Operating Temperature: -25C – 65C
- Weight: 100g
- Dimensions: 57mm x 175 mm x 16mm
- Includes:
- CT6280 Sensor
- Dimensions: 42mm x 65mm x 18mm (excluding the flexible loop and output cable)
- Weight: 71g
- Cable length – 800mm
- Measures up to 4200A AC ±3.0%rdg ±5dgt accuracy
- CR2032 Coin-Shaped lithium battery
- 9398 Carrying Case
- L9208 Test Lead
- Instruction manual
- CT6280 Sensor
- Power Supply: 1x CR2032 Coin-Shaped lithium battery
- IP40 dustproof and waterproof (while in storage)
- 1000A AC/DC current measurements to ±1.5%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±1.0%rdg ±3dgt accuracy
- True RMS AC measurements
- Digital backlit display
- CAT IV 300V (Current) / CAT III 600V (Current) / CAT III 300V (Voltage)
Standards:
- CAT IV 300 V (Current)
- CAT III 600 V (Current)
- CAT III 300 V (Voltage)
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC Tester 3288-20 – Hioki
Hioki’s 3288-20 AC/DC Tester is a versatile clamp meter designed for accurate and reliable electrical measurements, 1000A AC/DC current and 600V AC/DC voltage. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
Key Features:
- Operating Temperature: 0C – 40C (32F – 104F)
- Weight: 105g
- Dimensions: 57mm x 180 mm x 16mm
- Includes:
- CR2032 Coin-Shaped lithium battery
- 9398 Carrying Case
- L9208 Test Lead
- Instruction manual
- Power Supply: 1x CR2032 Coin-Shaped lithium battery that lasts 35 Hours
- 1000A AC/DC current measurements to ±1.5%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±1.3%rdg ±4dgt accuracy
- True RMS AC measurements
- Digital backlit display
- CAT III 600V / CAT III 300V / CAT II 600V
Standards:
- CAT III 600V Current
- CAT III 300V Voltage
- CAT II 600V Voltage
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC Tester CM4371-50 – Hioki
Hioki’s CM4371-50 model is a 600 A True RMS clamp meter designed with robust jaws and an IP54-rated dustproof and waterproof enclosure, allowing professionals to work efficiently in demanding environments. This includes tasks such as developing, repairing, and maintaining equipment like electric vehicles.
Key Features:
- Operating Temperature: -40C – 400C
- Weight: 340g
- Dimensions: 65mm x 215mm x 35mm
- Jaw Diameter: φ33 mm (1.30 in)
- AC measurement system: True RMS
- Includes:
- LR03 Alkaline battery ×2
- C0203 Carrying Case
- L9300 Test Lead
- Instruction manual x2
- Operating Precautions
- Power Supply: LR03 Alkaline battery ×2, continuous use 40hours
- DC Current Range: 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range)
- AC Current Range: 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: 45-66 Hz: ±1.3% rdg. ±0.08 A (at 20 A)
- DC Voltage Range: 600.0 ｍV to 1000 V
- AC Voltage Range: 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
- IP54 dustproof and waterproof (while in storage)
- Digital backlit display
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600 V
- CAT III 1000 V
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter Carry Case – Hioki
Secure your equipment with the Hioki C0203 Carrying Case for Clamp-On AC/DC Meters. Hioki’s Clamp Meter Carry Case’s robust design will keep your equipment protected, so you can bring it with you wherever you need it. Plus, by storing your tool in this reliable case, you are maximizing its longevity and efficiency.
Key Features
- Designed for Hioki Clamp-On AC/DC Meters
- Robust design for everyday travel and storage
- Maximizes the operating life of your equipment
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter with Power Function MD 9273 – Metrel
Metrel’s MD 9273 TRMS Clamp Meter with Power Function is a versatile and accurate tool for measuring electrical parameters. With Bluetooth connectivity to other Metrel products (MI 3155, MI 3152, and MI 3325), it allows for seamless integration and remote data monitoring. The Clamp Meter with Power Function features a 28mm jaw size, a shielded design for use in noisy environments, and precise measurements of AC current and voltage. Advanced functions include a 128Hz notch filter for cable tracing, intelligent loss analysis, and peak value display.
Key Features:
- Includes:
- MD 9273 Bluetooth TRMS Leakage Clamp with Power Functions
- Test lead with probe, 2 pieces
- AMD 9028 Alligator clip, 2 pieces
- 1.5V battery, type AA, 2 pieces
- Pouch
- Instruction manual
- Manufacturer Calibration certificate
- Meter Dimensions: 185mm x 62mm x 42mm
- Meter Weight: 210g
- Jaw size: 28mm
- MAX/MIN/HOLD mode: displays maximum, minimum or last measured value
- 128 Hz notch filter for cable tracing
- TRMS for accurate measurements on sinusoidal and non-sinusoidal signals
- Shielded jaw allows the clamp meter to be used in the noisiest environments
- Accurate readings of AC current with an accuracy of 0.8% and a base resolution of 0.01mA and voltage with an accuracy of 0.5% and a base resolution of 0.01V
- Measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement)
- Complex algorithms detect loss and allow determining possible reasons for current loss
- Measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th
- Dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF)
- The peak value of the waveform or crest factor can be displayed
- Bluetooth connection to other Metrel products MI 3155, MI 3152 and MI 3325
- Inrush current recording with other Metrel products MI 3155, MI 3152 and MI 3325
Standards:
- CAT III 600V
- CAT IV 300V
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-032
- IEC/EN 61010-2-033
(0 reviews) - Includes:
-
MultimetersVOLT SAFETY Digital Multimeter DT4252 – Hioki
Hioki’s DT4252 Digital Multimeter offers robust performance with a broad temperature range (-10°C – 50°C) and precise measurements. It weighs 390g and measures 84mm x 174mm x 52mm. The device includes 4 LR03 alkaline batteries, providing up to 130 hours of use. It supports 1000A AC/DC current and 600V AC/DC voltage measurements with high accuracy. It features a digital display and complies with CAT IV 600V and CAT III 1000V safety standards. The DT4252 is a digital multimeter designed specifically for general purpose testing.
Key features
- Operating Temperature: -10°C – 50°C
- Weight: 390g
- Dimensions: 84mm x 174mm x 52mm
- Includes:
- 4x LR03 alkaline battery
- Holster
- L9207-10 Test Lead
- Instruction manual
- Power Supply: 4x LR03 alkaline battery that lasts up to 130 Hours
- 1000A AC/DC current measurements to ±0.3%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±0.9%rdg ±5dgt accuracy
- Digital Display
- Designed specifically for general purpose testing
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600V
- CAT III 1000V
(0 reviews) -
MultimetersVOLT SAFETY Digital Multimeter DT4256 – Hioki
Hioki’s Digital Multimeter offers robust performance with a broad temperature range (-25°C to 65°C) and precise measurements. It weighs 390g and measures 84mm x 174mm x 52mm. The device includes 4 LR03 alkaline batteries, providing up to 130 hours of use. It supports 1000A AC/DC current and 600V AC/DC voltage measurements with high accuracy. It features a digital display and complies with CAT IV 600V and CAT III 1000V safety standards.
Key features
- Operating Temperature: -25°C – 65°C (-13°F – 149°F)
- Weight: 390g
- Dimensions: 84mm x 174mm x 52mm
- Includes:
- 4x LR03 alkaline battery
- Holster
- L9207-10 Test Lead
- Instruction manual
- Power Supply: 4x LR03 alkaline battery that lasts up to 130 Hours
- 1000A AC/DC current measurements to ±0.3%rdg ±3dgt accuracy
- 600V AC/DC voltage measurements to ±0.9%rdg ±3dgt accuracy
- Digital Display
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600V
- CAT III 1000V
(0 reviews) -
MultimetersVOLT SAFETY Digital Multimeter DT4261 – Hioki
Hioki’s DT4261 Digital Multimeter offers robust performance with a broad temperature range (-25°C – 65°C) and precise measurements. It weighs 480g and measures 87mm x 185mm x 47mm. It supports 1000A AC/DC current and 600V AC/DC voltage measurements with high accuracy. It features a digital display and complies with CAT IV 600V and CAT III 1000V safety standards.
Key features
- Operating Temperature: -25°C – 65°C
- Weight: 480g
- Dimensions: 87mm x 185mm x 47mm
- DC voltage range: 600 mV to 1000 V
- AC voltage range: 6 V to 1000 V
- Includes:
- LR6 (AA) alkaline battery × 3
- L9300 Test Lead
- Instruction manual
- Operating Precautions
- True RMS multimeter
- Measure a wide variety of parameters such as AC/DC voltage, AC/DC current, frequency, capacitance, diode, resistance and continuity
- Drop proof up to 1 meter
- IP54 environmental protection
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600V
- CAT III 1000V
(0 reviews) -
MetersVOLT SAFETY Digital Phase Sequence Meter HT82 – HT Italia
HT Italia Digital Phase Sequence Meter HT82 model is a digital portable meter to perform the phase sequence indication measurement by connecting the standard test leads on L1, L2 and L3 phases of a generic three phase system. The meter shows the “R” indication in positive test and “L” indication in the opposite case. An acknowledgement of wrong cable connection it’s also detectable by meter.
Key Features:
- Includes:
- 3 Test Cables and 3 alligator clips
- Carrying case
- User manual
- AC voltage functional range from 40V to 690V
- Frequency functional range from 15Hz to 400Hz
- ‘R’ and ‘L’ indication at display
- Detectable of wrong connection
- LCD custom display
- Protection holster
Standards:
- CAT III 600V
(0 reviews) - Includes:
-
Electrical TestersVOLT SAFETY Digital RCD Tester 5406A – Kyoritsu
The Kyoritsu Digital RCD Tester is an essential tool for electricians and safety professionals, designed to efficiently test residual current devices (RCDs) for functionality and reliability. This compact and user-friendly tester features a clear digital display that provides accurate readings of trip times and current ratings, ensuring compliance with safety standards. With multiple test current settings, including 30mA, 100mA, and 300mA, it allows for versatile applications across various electrical systems. The tester’s robust design is built to withstand the rigors of daily use, while its intuitive interface makes it easy to operate, even in challenging environments. Whether conducting routine maintenance or troubleshooting, the Kyoritsu Digital RCD Tester delivers precise results, promoting electrical safety and performance.
Key Features:
- Dimensions: 167mm x 186mm x 89mm
- Weight: 800g
- Rated Tripping Current: 10/20/30/200/300/500mA
- Trip Current Duration: 1000ms, 200ms (×5)
- Includes:
- 7123 Australian Plug Test Lead
- 9121 Shoulder Strap
- 9147 Cord Case
- Instruction manual
- 3 LEDs for checking correct wiring status.
- 0 and 180 degree phase angle switch permits quick tests and consistent readings.
- Digital read-out of tripping time.
- Test of a large kind of RCDs, Standard, Selective, AC and A(DC sensitive breakers).
- Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings.
- Large custom digital display readout.
- Visual indication of reversed phase and neutral wiring at socket.
Standards:
- CAT III 300V
- IEC 61557-1,-6
- IEC 61010-2-031
- IEC 60529 (IP54)
(0 reviews) -
MultimetersVOLT SAFETY DM66 Multimeter – Flir
The Flir DM66 digital multimeter is ideal for electricians. The DM66 can measure frequency, capacitance, voltage, current, resistance and more!
Key Features:
- Operating Temperature: -10C – 50C
- Measures ACV, DCV, Resistance, Continuity, Capacitance, Diode, DCA, ACA, Temperature, line Frequency, non-contact Voltage (NCV)
- 6000 Count (3-5/6 digits) backlit LCD with 5 reading per second update rate
- Auto Power OFF
- True RMS responding
- Auto AC/DC detection for voltage measurements
- LoZ (low impedance) for ghost voltage protection
- Auto ranging
- VFD feature (low pass filter for AC voltage measurements)
- MIN-MAX-AVG Reading Memory
- Relative Zero mode
- Drop proof to 2m
Standards:
- IP40 (Excluding terminals)
- CAT IV 300V
- CAT III 600V
(0 reviews) -
MetersVOLT SAFETY High Current Micro Ohmmeter Ducter Tester DLRO200 – Megger
Megger High Current Micro Ohmmeter Ducter Tester DLRO200 measures resistance between 0.1 and 1 ohms, at high currents and also test currents from 10 amps up to 200 amps subject to the load resistance and supply voltage.
Key Features:
- Dimensions: 410mm x 250mm x 270mm
- Small and weighs less than 15kg
- Test currents from 10A to 200A DC
- 0.1 µΩ best resolution
- On board memory for up to 300 test results and notes
- RS232 port to download stored results or for real time output to a printer
- Supplied complete with 5m test leads and download software
Standards:
- IEC61010-1
(0 reviews) -
ThermometersVOLT SAFETY Infrared Camera E8 Pro – Flir
The FLIR E8 Pro is your must-have tool for locating and diagnosing electrical, mechanical, and building problems. Quickly pinpoint hot spots and easily identify problems with vibrant thermal imagery.
Your inspections will be more efficient because you can do all your work from the touchscreen: organize your photos, add detailed notes, and upload them directly to the FLIR Ignite cloud for convenient access from any device.
Key Features:
- Temperature Range: -20C – 550C in two ranges
- Accuracy: ±2C or ±2% of reading
- IR Resolution: 320 x 240 pixels
- Thermal Sensitivity/NETD: <0.04C / <40 mK at 30C
- Field of view (FOV): 33°
- Digital Camera: 5MP
- Image Modes: Thermal MSX, Picture-in-picture, Digital Camera
- Display: 3.5 inches, 640 x 480 colour LCD
- Minimum focus distance of 0.36m
- 4 hour operating time
Standards:
- EN 301 489-1
- EN 301 489-17
- EN 61000-6-3
- EN 61000-6-2
- FCC 47 CFR Part 15 Class B
- IP54
(0 reviews) -
Insulation TestersVOLT SAFETY Insulation/Continuity Digital Multimeter MD 9070 – Metrel
Metrel’s MD 9070 is a high accuracy Insulation and continuity Multimeter which may be used in a CAT IV / 600 V environment. It’s dual digital display provides all needed data to the operator while it’s size ensures that it can be operated single handedly. The Insulation and Continuity Multimeter is equipped with a built-in VFD feature that makes the instrument capable of measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test. The MD 9070 has a wide range of extra features, including data hold, memory, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset, relative function and more.
Key Features:
- Includes:
-
- Multimeter MD 9070 with rubber holster
- Test lead with probe, 2 pieces
- Insulated crocodile clip, 2 pieces
- Insulation/Continuity test lead with probe, 1 piece
- 1,5 V AA battery (IEC LR6), 4 pieces
- User manual
- Meter Dimensions: 103mm x 64.5mm x 208mm
- Meter Weight: 635g
- Insulation test voltages of 50V, 100V, 250V, 500V, 1000V
- TRMS accurate readings on sinusoidal and non-sinusoidal signals
- VFD feature makes the instrument capable of measuring the true values in accordance with frequency
- Auto-ranging so user can switch between auto and manual ranging
- Relative zero mode function for comparing the difference between signals or removing background noise
- MAX/MIN recording of maximum, minimum and average values
- Data Hold feature freezes the display for later view
- PI/DAR feature
- Backlight for working in dark conditions
Standards:
- CAT III 1000V
- CAT IV 600V
- IEC/EN61557-1
- IEC/EN61557-2
- IEC/EN61557-4
- IEC/UL/EN61010-1
- IEC/EN61010-2-030
- IEC/EN61010-2-033
- IEC/UL/EN61010-031
(0 reviews) -
MetersVOLT SAFETY Lux Meter FT3424 – Hioki
Hioki’s FT3424 Lux Meter is a versatile light meter designed for a broad spectrum of uses, including illumination equipment, lighting tasks, and facility management. It can measure LED lighting and offers five measurement ranges, from 20 lx to 200,000 lx, accommodating a wide range of luminance levels.
Key features
- Dimensions: 78mm x 170mm x 39mm
- Weight: 310g
- Measurement Ranges: 0.00lx to 20.00lx, 0.00lx to 200.0lx, 0.00lx to 2000lx, 0.00lx to 20000lx, 0.00lx ~ 200000lx
- Includes:
- LR6 Alkaline battery ×2
- Sensor cap (with strap)
- Carrying case
- Strap (for instrument)
- USB cable (0.9 m/2.95 ft)
- CD (USB driver, dedicated computer application software, and communications specifications)
- Compatible with LED lighting
- Timer hold function lets you make measurements in remote locations while avoiding the effects of shadows and reflections
- Save up to 99 measured values in the instrument’s internal memory and transfer them to a computer later for improved work efficiency
- LR6 Alkaline battery ×2 for continuous use of up to 300 hours
Standards:
- DIN 5032-7 class B
- JIS C 1609-1 general AA class
(0 reviews) -
Gas DetectorsVOLT SAFETY Micro 4 Gas Detector – WatchGas
The WatchGas SST Micro (SST4 Micro) is a rugged, ultra-compact 4 gas detector built on Solid Polymer Technology (SPT) — delivering best-in-class sensor response times with outstanding humidity and temperature stability.
Key Features:
- Detects: CO / H2S / O2 / LEL (Low-Power Catalytic Bead)
- 200-hour runtime with NDIR sensor option; 48hr with LPC
- IP65/68 rated — submersible and dust-tight
- NFC configuration + induction charging (no connectors to corrode)
- One-button operation — easy to use with gloved hands
- Configurable sensor library to suit specific applications
- Larger backlit screen; fastest T90 response time in its class
- Compatible with WatchGas SST Calibration Docking Station
- Double-shot moulded housing with screen bumpers
- Protected serial number to ensure better asset management
- Replaceable clips — without having to replace the whole back plate
- Comes with the Gas Detector, Induction Charger, Testing Cap and Hose
Confined Space Entry:
The SST Micro is purpose-built for confined space pre-entry and continuous monitoring. It meets the requirements for O2, LEL, CO, and H2S monitoring in accordance with Australian confined space regulations.Standards:
- IP65/68
- ATEX, IECEX, UKEX : LEL-LPC and LEL-CAT, II 1 G
- Ex ia IIC T4 Ga
- I M1 Ex ia I Ma
- LEL-IR II 1 G Ex ia op is IIC T4 Ga
- I M1 Ex ia op is I Ma
- EMC Directive 2014/30/EU
Warranty:
- 3 year manufacturer warranty
(0 reviews) -
MetersVOLT SAFETY Multi Function Tester MI 3152 – Metrel
Metrel’s Multi Function Tester MI 3152 InstalTest IT-XC is an advanced multi-functional measuring instrument, designed specifically for testing in industry. The already well known functions like complete installation safety testing according to IEC/EN 61557 and Pre-Programmed AUTO SEQUENCE testing of TN, TT and IT earthing systems are managed by a completely new user interface based on large colour touch screen display. The Multi Function Tester MI 3152 IT-XC is pre-set with AS/NZS3017 limits for pass/fail indication on tests.
Key Features:
- Includes:
- Instrument MI3152 Instaltest XC
- Mains measuring cable, 1.5m (AU PLUG)
- Test lead, 1.5m (brown, blue, green)
- Test probe, 3 pcs (brown, blue, green)
- Crocodile clip, 3 pcs (brown, blue, green)
- Test lead, green, 20m
- USB cable
- RS232-PS/2 cable
- AC adaptor (charger)
- NIMH rechargeable batteries, AA, 6 pcs
- Soft carry bag
- Soft carrying neck belt
- Quick guide manual
- ES Manager BASIC reporting software (download)
- Calibration certificate
- Instrument Dimensions: 230 x 1-3 x 115 mm
- Instrument Weight: 1.3kg
- High resolution colour touch screen, 4.3” TFT
- Insulation resistance with DC voltage from 50V to 1000V
- Built-in fuse tables for automatic evaluation of the line / loop impedance result
- Monitoring of all 3 voltages in real-time
- Automatic polarity reversal on continuity test
- Automated RCD testing procedure
- Barcode scanning of RCD for test/retest for faster testing
- Automated Impedance testing procedure (Z AUTO)
- Functional inspections
- Measurement filtering according to the selected area group
- Built-in charger and rechargeable batteries as standard accessory
Standards:
- CAT II 1000V
- CAT III 600V
- CAT IV 300V
- IEC/EN 61557-7, 10, 11, 12, 14
- IEC/EN 61010-1
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-032
(0 reviews) - Includes:
-
MetersVOLT SAFETY Multi Function Tester MI 3155 EurotestXD – Metrel
Metrel’s Multi Function Tester MI 3155 EurotestXD is an advanced multi-functional measuring instrument, designed specifically for testing in industry. What differentiates this instrument from the rest is its ergonomic design and an intuitive user interface, encompassing a memory organiser and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display. This Multi Function Tester supports a wide range of tests and measuring functions, including on-line voltage monitoring, phase sequence testing, varistor testing, PI/DAR calculation, luminance measurement, discharge time testing, ISFL measurements, IMD tests as well as functional and visual inspections.
Key Features:
- Includes:
- Instrument MI 3155 Multi Function Tester
- Mains measuring cable
- 3 x Test Leads
- 3 x Test Probes
- 3 x Crocodile Clips
- 5 ohm and 10 ohm Resistor Box for Socket Test
- AC Adapter
- NiMH Rechargeable Batteries
- Soft Carry Case
- ES Manager BASIC Reporting Software
- Instrument Dimensions: 252 x 111 x 165 mm
- Instrument Weight: 1.78kg
- High resolution colour touch screen, 4.3” TFT
- Functional inspections
- Visual inspections
- Custom inspections (visual and functional) which may be incorporated into AUTO SEQUENCEs
- EVSE AUTO SEQUENCEs and function inspections
- Machine functional and visual inspections
- Monitoring of all 3 voltages in real-time
Standards:
- CAT III 600V
- CAT IV 300V
- IEC/EN 61557-7, 10, 11, 12, 14
- IEC/EN 61010
- IEC/EN 61010-2-03
(0 reviews) - Includes:
-
MetersVOLT SAFETY Non-contact Phase Rotation Tester
Volt’s Non-Contact Phase Rotation Tester is designed to identify phase sequence on three-phase systems and open phases.
Key Features:
- Measurement Range: 75VAC – 1000VAC
- Frequency Range: 45Hz – 65Hz
- Dimensions: 127mm x 72mm x 44mm
- Weight: 400g
- Cable Length: 800mm
- Clip Jaw Opening: 33mm diameter
- Operating Temperature: 0C – 40C
- Identifies phase sequence on three-phase systems and open phases
- Brightness button to help with visibility in bright areas
- Bright LED display lights to indicate results of test
- No metal contact points to provide greater safety
- Powered by one 9V battery
- Loud buzzer indicator
Standards:
- EN 61010-1 CAT III 1000V / CAT IV 600V
- EN 61326-1 EN 61557-1
- EN 61557-7
- IP40
(0 reviews) -
MetersVOLT SAFETY Non-Contact Phase Rotation Tester 8035 – Kyoritsu
The Kyoritsu 8035 Non-Contact Phase Rotation Tester is a sophisticated tool designed for quickly and accurately identifying the phase rotation of three-phase electrical systems without the need for direct contact. Featuring a bright LED display and an intuitive interface, this tester provides clear visual indications of phase sequence, helping to prevent costly errors during installation and maintenance. Its compact and ergonomic design allows for easy handling, while the non-contact measurement capability ensures user safety. This Non-Contact Phase Rotation Tester also includes audible alerts for enhanced convenience, making it ideal for electricians and technicians working in various environments. With its robust construction and reliable performance, the Kyoritsu 8035 is a must-have for anyone involved in electrical work, ensuring proper phase alignment and efficient system operation.
Key Features:
- Dimensions: 112mm x 61mm x 36mm
- Weight: Approx. 380g
- Operating Temperature: -10ºC – 50ºC
- Detection Method: Electrostatic Induction
- Measuring Voltage Range: From 70V to 1000V AC phase to phase
- Measuring frequency range: 45 to 66Hz
- Includes:
- 9096 Carrying Case
- LR6 (AA) x 4
- Instruction Manual
- New technology permits safe testing, without the need of direct contact between probes and live wires
- The insulated alligator clips can clip insulated cables from φ2.4 to 30mm
- Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones
- A magnet on the backside of the instrument can fix the instrument onto the distribution board
- Wide measuring range for 3 phase installations from 70 to 1000V AC
- Super brightness function permits clear LEDs indication also in sunshine
Standards:
- CAT III 1000V
- CAT IV 600V
- IEC 61326-1
- IEC 61557-1, -7
(0 reviews) -
MultimetersVOLT SAFETY Pencil-style Digital Multimeter 3246-60 – Hioki
Hioki’s pencil-style digital multimeter for general electrical maintenance and testing, and includes a brilliant LED at the pen tip for a clear view of the measurement target.
Key features
- Dimensions: 30mm x 182mm x 26.5mm
- Weight:80g
- Test lead and main unit in a single body
- Overload protection to 600 V at resistance or continuity functions
- LED light brightly illuminates test points
- DC Voltage range from 420mV to 600V – 5 Ranges
- AC Voltage range from 4.2V to 600V – 4 Ranges
- Resistance range from 420Ohm to 42MOhm – 6 Ranges
- Continuity buzzer
- Comes with coin type lithium battery
Standards:
- CAT IV 300 V
- CAT III 600 V
(0 reviews) -
MetersVOLT SAFETY Phase Detector PD3129-10 – Hioki
Hioki’s non-contact voltage detection and measurement technology prioritises efficiency and safety to protect customers performing on-site electrical work during renovations and expansions of manufacturing facilities and buildings. The PD3129-10 model is a non-contact Phase Detector that identifies the phase of electrical current in insulated wires without the need for metallic contact voltage clips. The green arrow indicates the normal phase, which is helpful for visual documentation of the correct completion of electrical work.
Key features
- Dimensions: 70mm x 75mm x 30mm
- Weight: 240g
- Cord Length: 0.7m
- Voltage Range: 70 to 1000V AC
- Includes:
- R6P (AA) manganese battery ×2
- Carrying Case
- Strap
- Spiral tube
- Instruction Manual
- Rotating LED indicator shows the phase sequence for a 3-phase power supply at a glance
- Intermittent beeps signal positive phase; continuous tone signals reverse phase
- Magnetic base allows the instrument to be secured on a distribution panel
- Green LED arrow clearly shows phase direction, perfect for visual reports
- Auto shut off if no activity is detected after power is turned ON for 15 minutes
- R6P (AA) manganese battery ×2 continuous use up to 70 hours
- CAT IV 600 V, CAT III 1000 V
Standards:
- CAT IV 600 V
- CAT III 1000 V
(0 reviews) -
Clamp MetersVOLT SAFETY Photovoltaic Clamp Meter MD 9260 – Metrel
Metrel’s Photovoltaic Clamp Meter MD 9260 supports measurements up to 1500V with CAT III safety. Its voltage range and safety make it useful in highly demanding environments like solar power plants, wind power plants, or other high power environment using DC current. It has 2000A AC/DC current range and can additionally measure resistance, capacitance, frequency and temperature – in short a well-rounded multimeter-style tool for use in power applications.
Key Features:
- Includes:
- MD 9260 TRMS Photovoltaic Clamp Meter 1500V DC
- AMD 9026 Test lead with probe, 2 pieces
- AMD 9023 Thermocouple probe type K
- 1.5V AA battery, 2 pieces
- Soft carrying pouch
- User manual
- Meter Dimensions: 264mm x 97mm x 43mm
- Meter Weight: 608g
- Jaw opening: 55mm max
- TRMS for accurate measurement of sine and non-sine signals
- VFD low-pass filter for accurate frequency measurements of noisy signals
- High current range of 2000A
- CAT III 1500 V DC and CAT IV 1000V safety
- Protection against 12 kV transients
- Auto and manual ranging
- Easily compare consecutive measurements
- Crest function catches peaks as short as 5ms
- Temperature measurements up to 1000 °C
Standards:
- CAT III 1500V
- CAT IV 1000V
- IEC/EN 61010
- IEC/EN 61010-1
- IEC/EN 61010-2-030
- IEC/EN 61010-2-033
(0 reviews) - Includes: