VOLT SAFETY Non-contact Phase Rotation Tester
Volt’s Non-Contact Phase Rotation Tester is designed to identify phase sequence on three-phase systems and open phases.
Key Features:
- Measurement Range: 75VAC – 1000VAC
- Frequency Range: 45Hz – 65Hz
- Dimensions: 127mm x 72mm x 44mm
- Weight: 400g
- Cable Length: 800mm
- Clip Jaw Opening: 33mm diameter
- Operating Temperature: 0C – 40C
- Identifies phase sequence on three-phase systems and open phases
- Brightness button to help with visibility in bright areas
- Bright LED display lights to indicate results of test
- No metal contact points to provide greater safety
- Powered by one 9V battery
- Loud buzzer indicator
Standards:
- EN 61010-1 CAT III 1000V / CAT IV 600V
- EN 61326-1 EN 61557-1
- EN 61557-7
- IP40
Related products
-
Other Diagnostic ToolsSP TOOLS Diagnostic Pump Kit – Dual Mode 2 Way Quick Switch
- High quality diagnostic tool
- 2-Way pressure and vacuum test functions
- Patented design – Intuitive rotary dial mode switch – Pistol grip with lever
- High volume efficiency in both pressure and vacuum modes
- Manufactured from reinforced composite materials – Very high strength – High impact resistance – Excellent chemical resistance
- Integrated rear mount gauge – Optimum viewing angle – Maximum impact protection
- High quality silicon material hoses with quick couple hose fittings – Quick hose interchange – No leaks under vacuum or pressure
- Custom blow mold storage case
DUAL MODE PRESSURE AND VACUUM FUNCTIONS:
Pressure Mode: - Monitor turbo charger boost pressure
- Test and adjust turbo charger waste gate actuators
- Test pressure operated central locking systems
- Test fuel tank vent valves
- Test one way valves
- Diagnose small engine faults
Vacuum Mode: - Test EGR valve
- Test fuel pressure regulator
- Test map sensor
- Test thermal vacuum switches
- Test electric vacuum switches
- Test one way valves
- Test HVAC valves
- Test automatic transmission modulator valve
- Test central locking systems
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Heat Resistant Woven Aramid Gloves – Elliotts
Elliotts Heat Resistant Woven Aramid Gloves are made of heat-resistant para-aramid outer shell materials and meta-aramid thermal liners. These highly technical materials provide high levels of contact, convective, and radiant heat protection, as well as protection from small drops of molten metal.
Key Features:
- Length: 457mm
- Size: One Size Fits Most
- Materials:
- Woven para-aramid palm
- Felt para-aramid back and cuff
- T-Gard N260 liner
- Woven para-aramid palm and felt para-aramid back and cuff
- Lined with T-Gard® N260 meta-aramid thermal lining
- Wear seams are welted for additional protection
- All seams are sewn with heat-resistant aramid thread for extra durability
- Suitable for Foundry and Furnace work
Standards:
- AS/NZS 2161.3 (EN388) – 3544
- AS/NZS 2161.4 (EN407) – 43433X
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY RD8200-TX10 Cable and Pipe Locator Kit – Radiodetection
The RD8200 is a professional-grade cable and pipe locator engineered for accuracy, reliability, and advanced diagnostics. Ideal for utility contractors, surveyors, and infrastructure teams, it delivers precise underground asset detection even in challenging environments. Combining the receiver with a powerful 10-Watt transmitter and clamp, crews can accurately identify target assets and reduce strike risk. Built for reliable, accountable damage prevention before excavation begins.
Easy to setup and use, along with a sun light readable display, a high performance audio system and vibration alerts ensure you’re always ready for challenging environments.
Cable Locator Key Features:
- Maximum Depth Readout: Up to 30m Cable/Pipe and 19.5m Sonde
- Depth Measurement Precision: ±3%
- Locate Accuracy: ±5% of depth
- Battery Life: Up to 13 hours
- Size: 64.8cm x 28.6cm x 12.5cm
- Weight: Approx. 2kg
- Simultaneous display of depth and current
- User configurable Compass, active modes and passive modes
- Peak, Null, Peak-Plus, Guidance Mode, Broad Peak
- All Sonde Frequencies (512Hz, 640Hz, 8kHz, 33kHz)
- 22 Locator Frequencies (From 512Hz to 200kHz)
- 14 Current Direction Frequencies 219.9Hz / 439.8Hz to 4096Hz / 8192Hz
- Fault Finding Modes 8kHz and 256Hz
- Dynamic Overload Protector
- Power (50/60 Hz selectable) broad band, selective harmonics
- Power, Power Filters, Radio, CPS (100/120Hz, no more CATV mode)
- Depth in Power Mode
- Sounds 3db higher than other locators, high Pitch option for noisy environments, speaker in back of unit
- 3.5mm headphone socket
- StrikeAlert Technology warns operators of buried cables via audible alerts and vibration
- Dynamic Overload Protection by filtering interference in electrically noisy environments
- Rugged, ergonomic design built for field durability and long work sessions
- High-visibility display with a screen readable even in direct sun light
- Audible and visual warning when user is swinging the locator excessively
Transmitter Key Features:
- Max Power Output: 10W
- Max Voltage Output: 90V
- Max Current Output: 0.5A
- Weight: Approx. 3kg
- 16 Active Frequencies, 8 Induction Frequencies
- 100mm Clamp
Standards:
- Cable Locator – IP65
- Transmitter – IP54
- EN 61010-1:2010
- EN 61326-1:2013
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Aluminised Furnace Apron – Elliotts
Elliotts Aluminised Furnace Apron is designed to protect the body in heavy duty furnace environments where protection from high radiant heat, sparks and slag is required. Elliott’s Aluminised Furnace Apron offers superior protection in high-temperature environments and has long-lasting performance.
Key Features:
- Length: 1070mm
- Width: 610mm
- Material: Aluminised Carbon / Aramid + T-Gard P190 – 770gsm
- Fitted with an adjustable leather strap and buckle
- Protection from high radiant heat, sparks and slag
- Long-lasting performance
Standards:
- ISO 11612
(0 reviews)