VOLT SAFETY 1kV Analog Insulation Tester 3490 – Hioki
The Hioki 3490 1kV Insulation Tester features all-in-one designs including built-in rugged cases and test lead storage compartments.
The 3490 is a 3-range, 250/500/1000V analogue insulation resistance meter with efficient functions and features to help shorten work time associated with field insulation testing.
Key Features:
- Size: 159mm x 177mm x 53mm
- Operating Temperature: 0C – 40C
- Measures Insulation Resistance (up to 4000 Mega ohms), AC Voltage (up to 600V) and low resistance (up to 30 Ohms)
- 3 Output Voltages for testing – 250VDC, 500VDC and 1000VDC
- Backlit LED to see the analogue screen in low light environments
- Durable 1.2m length test leads to take measurements
- Zero ohm adjustment to ensure correct readings
- Continuity Check at 200mA at 3 Ohm range
Standards:
- CE
- IP40 (Excluding terminals)
- EN61010
- EN612326
- EN61557-1
- EN61557-2
Related products
-
MetersVOLT SAFETY Multi Function Tester MI 3155 EurotestXD – Metrel
Metrel’s Multi Function Tester MI 3155 EurotestXD is an advanced multi-functional measuring instrument, designed specifically for testing in industry. What differentiates this instrument from the rest is its ergonomic design and an intuitive user interface, encompassing a memory organiser and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display. This Multi Function Tester supports a wide range of tests and measuring functions, including on-line voltage monitoring, phase sequence testing, varistor testing, PI/DAR calculation, luminance measurement, discharge time testing, ISFL measurements, IMD tests as well as functional and visual inspections.
Key Features:
- Includes:
- Instrument MI 3155 Multi Function Tester
- Mains measuring cable
- 3 x Test Leads
- 3 x Test Probes
- 3 x Crocodile Clips
- 5 ohm and 10 ohm Resistor Box for Socket Test
- AC Adapter
- NiMH Rechargeable Batteries
- Soft Carry Case
- ES Manager BASIC Reporting Software
- Instrument Dimensions: 252 x 111 x 165 mm
- Instrument Weight: 1.78kg
- High resolution colour touch screen, 4.3” TFT
- Functional inspections
- Visual inspections
- Custom inspections (visual and functional) which may be incorporated into AUTO SEQUENCEs
- EVSE AUTO SEQUENCEs and function inspections
- Machine functional and visual inspections
- Monitoring of all 3 voltages in real-time
Standards:
- CAT III 600V
- CAT IV 300V
- IEC/EN 61557-7, 10, 11, 12, 14
- IEC/EN 61010
- IEC/EN 61010-2-03
(0 reviews) - Includes:
-
Clamp MetersVOLT SAFETY VT8-600 Open Jaw Clamp Meter – Flir
The Flir VT8-600 allows voltage, continuity, and current measurement. The open jaw design can fit into tight spaces and measure large-diameter cables. The VT8-600 carries a CAT III 600 V/CAT IV 300 V safety rating and a 100A/600V measuring range.
Key Features:
- Operating Temperature: -10C – 50C
- Jaw opening: 15.5 mm
- 100A AC/DC current measurements
- 600V AC/DC voltage measurements
- 6000 count (0 ~ 5999) digital display
- LCD display with high/low intensity backlight
- True RMS AC measurements
- 0.8% DCV accuracy
- Data Hold freezes the displayed reading
- Relative and DC Zero functions
- Auto Power OFF (APO)
- Non-Contact Voltage Detector
- Visual and audible continuity measurement alert
- Low battery indicator
- CAT III 600V / CAT IV 300V
Standards:
- CAT III 600V
- CAT IV 300V
(0 reviews) -
Insulation TestersVOLT SAFETY Insulation/Continuity Digital Multimeter MD 9070 – Metrel
Metrel’s MD 9070 is a high accuracy Insulation and continuity Multimeter which may be used in a CAT IV / 600 V environment. It’s dual digital display provides all needed data to the operator while it’s size ensures that it can be operated single handedly. The Insulation and Continuity Multimeter is equipped with a built-in VFD feature that makes the instrument capable of measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test. The MD 9070 has a wide range of extra features, including data hold, memory, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset, relative function and more.
Key Features:
- Includes:
-
- Multimeter MD 9070 with rubber holster
- Test lead with probe, 2 pieces
- Insulated crocodile clip, 2 pieces
- Insulation/Continuity test lead with probe, 1 piece
- 1,5 V AA battery (IEC LR6), 4 pieces
- User manual
- Meter Dimensions: 103mm x 64.5mm x 208mm
- Meter Weight: 635g
- Insulation test voltages of 50V, 100V, 250V, 500V, 1000V
- TRMS accurate readings on sinusoidal and non-sinusoidal signals
- VFD feature makes the instrument capable of measuring the true values in accordance with frequency
- Auto-ranging so user can switch between auto and manual ranging
- Relative zero mode function for comparing the difference between signals or removing background noise
- MAX/MIN recording of maximum, minimum and average values
- Data Hold feature freezes the display for later view
- PI/DAR feature
- Backlight for working in dark conditions
Standards:
- CAT III 1000V
- CAT IV 600V
- IEC/EN61557-1
- IEC/EN61557-2
- IEC/EN61557-4
- IEC/UL/EN61010-1
- IEC/EN61010-2-030
- IEC/EN61010-2-033
- IEC/UL/EN61010-031
(0 reviews) -
MetersVOLT SAFETY Multi Function Tester MI 3152 – Metrel
Metrel’s Multi Function Tester MI 3152 InstalTest IT-XC is an advanced multi-functional measuring instrument, designed specifically for testing in industry. The already well known functions like complete installation safety testing according to IEC/EN 61557 and Pre-Programmed AUTO SEQUENCE testing of TN, TT and IT earthing systems are managed by a completely new user interface based on large colour touch screen display. The Multi Function Tester MI 3152 IT-XC is pre-set with AS/NZS3017 limits for pass/fail indication on tests.
Key Features:
- Includes:
- Instrument MI3152 Instaltest XC
- Mains measuring cable, 1.5m (AU PLUG)
- Test lead, 1.5m (brown, blue, green)
- Test probe, 3 pcs (brown, blue, green)
- Crocodile clip, 3 pcs (brown, blue, green)
- Test lead, green, 20m
- USB cable
- RS232-PS/2 cable
- AC adaptor (charger)
- NIMH rechargeable batteries, AA, 6 pcs
- Soft carry bag
- Soft carrying neck belt
- Quick guide manual
- ES Manager BASIC reporting software (download)
- Calibration certificate
- Instrument Dimensions: 230 x 1-3 x 115 mm
- Instrument Weight: 1.3kg
- High resolution colour touch screen, 4.3” TFT
- Insulation resistance with DC voltage from 50V to 1000V
- Built-in fuse tables for automatic evaluation of the line / loop impedance result
- Monitoring of all 3 voltages in real-time
- Automatic polarity reversal on continuity test
- Automated RCD testing procedure
- Barcode scanning of RCD for test/retest for faster testing
- Automated Impedance testing procedure (Z AUTO)
- Functional inspections
- Measurement filtering according to the selected area group
- Built-in charger and rechargeable batteries as standard accessory
Standards:
- CAT II 1000V
- CAT III 600V
- CAT IV 300V
- IEC/EN 61557-7, 10, 11, 12, 14
- IEC/EN 61010-1
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-032
(0 reviews) - Includes: