Shop
Showing 6661–6696 of 7795 results
-
Diagnostic ToolsSP TOOLS Infrared Laser Guided Thermometer
- Dual laser technology (twin dots)
- Rapid detection function
- Automatic data hold
- OC/OF switch
- Emissivity digitally adjustable from 0.10 to 1.0
- Max temperature display
- -50°C/550°C range (-58°F/1022°F)
- Backlight LCD displays resolution 0.1°C(0.1°F)
- Set high & low alarms
* NOTE: NOT SAFE FOR USE ON HUMANS OR ANIMALS
(0 reviews) -
Accessories & PartsSP TOOLS Inspection Mirror – Telescopic Round
- Strong & lightweight stainless steel shafts
- PVC comfortable cushion handle
- Swivel head on all models
AVAILABLE IN VARIOUS SIZES
PART NO. MIRROR DIAMETER EXTENDABLE LENGTH SP31402 57mm 250 to 930mm SP31403 82mm 280 to 800mm (0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
GeneratorsSP TOOLS Inverter Generator 2300W
INCREASED POWER OUTPUT
Now even more powerful, this compact and super quiet SP Inverter Generator is ideal for electronic, camping, leisure activities and trade applications.
SPECIFICATIONS
- Max Watts: 2300w (Starting Power)
- Rated Watts: 1800w (Running Power)
- Power Outlets: 1 (15amp)
- Power: 50Hz/240v
- LwA 80-91 dBa (LAeq 60dBa)*
(* The LAeq noise level is calculated on ¼ load at 7mt for continuous operation in a non-sound reflecting environment) - Tank Capacity: 4L
- Starting System: Pull
- Net Weight: 21kg
- Operating Hours: 6.3h at 50% Load
FEATURES
- Torini 4 stroke engine
- 3 in 1 multi-function control
- Engine smart control (ESC)
- 32 bit inverter core
- Low running noise
- 12 Volt outlet
- Parallel connection capable
- Robust construction
- Easy oil-change compartment
- Meets strict Environmental Protection Agency (EPA), Proposed Australian Emissions Standards & strict Californian pollution laws and environmental protection standards.
- Dimensions: 499 x 285 x 455mm
ALL SP INVERTER GENERATORS FEATURE A:
- Patented Torini engine with a large volume muffler to increase fuel efficiency and reduce noise
- Patented permanent magnet inverter generator with ESC which intelligently controls rpm to further reduce noise and fuel consumption
- Patented 3 way cooling system to lower running temperature and extend engine life
- Patented exhaust gas circulation system where exhaust gas passes through 2 cavities for double oil separation, thus decreasing oil consumption and extending engine life
INDUSTRIAL TORINI ENGINE
At the heart of the SP generator range, Torini Industrial Engines offer maximum power with maximum reliability.
Equipped with cast iron bore, overhead valve technology & large capacity oil reservoir ensures years of trouble free operation.
- Fast Starting
- Transistorised Ignition
- Smooth Operation
- OHV (Over Head Valve)
- High Efficiency
- Low Oil Protection
(0 reviews) -
GeneratorsSP TOOLS Inverter Generator 3300W
INCREASED POWER OUTPUT
Now even more powerful, this compact and super quiet SP Inverter Generator is ideal for electronic, camping, leisure activities and trade applications.
SPECIFICATIONS
- Max Watts: 3300w (Starting Power)
- Rated Watts: 2500w (Running Power)
- Power Outlets: 2 (15amp)
- Power: 50Hz/240v
- LwA 80-88 dBa (LAeq 59dBa)*
(* The LAeq noise level is calculated on ¼ load at 7mt for continuous operation in a non-sound reflecting environment) - Tank Capacity: 4L
- Starting System: Pull
- Net Weight: 27kg
- Operating Hours: 4.7h at 50% Load
FEATURES
- Torini 4 stroke engine
- 3 in 1 multi-function control
- Engine smart control (ESC)
- Compact and lightweight
- 32 bit inverter core
- Low running noise
- Parallel connection capable
- Robust construction
- Easy oil-change compartment
- Meets strict Environmental Protection Agency (EPA), Proposed Australian Emissions Standards & strict Californian pollution laws and environmental protection standards.
- Dimensions: 600 x 340 x 530mm
ALL SP INVERTER GENERATORS FEATURE A:
- Patented Torini engine with a large volume muffler to increase fuel efficiency and reduce noise
- Patented permanent magnet inverter generator with ESC which intelligently controls rpm to further reduce noise and fuel consumption
- Patented 3 way cooling system to lower running temperature and extend engine life
- Patented exhaust gas circulation system where exhaust gas passes through 2 cavities for double oil separation, thus decreasing oil consumption and extending engine life
INDUSTRIAL TORINI ENGINE
At the heart of the SP generator range, Torini Industrial Engines offer maximum power with maximum reliability.
Equipped with cast iron bore, overhead valve technology & large capacity oil reservoir ensures years of trouble free operation.
- Fast Starting
- Transistorised Ignition
- Smooth Operation
- OHV (Over Head Valve)
- High Efficiency
- Low Oil Protection
(0 reviews) -
GeneratorsSP TOOLS Inverter Generator 4500W
THE ULTIMATE SUPER QUIET OUTDOOR COMPANION
Ideal for all camping and leisure activities, compared to similar products, the SPGi4500E is a powerful super quiet inverter generator with the best power, size to weight ratio on the market. Built around the reliable Torini race tested 7Hp engine and intelligent power supply, it is well suited for recreational use with air conditioners, refrigerators, microwave ovens, coffee machines & entertainment appliances. The microprocessor controlled inverter produces a high precision, pure sine wave power output, perfect for laptops, computers, mobile phones & tablets making it ideal for back up power at home during power outages & storm emergencies.
Don’t risk your electronic devices on anything less.
SPECIFICATIONS
- Max Watts: 4500w (Starting Power)
- Rated Watts: 3500w (Running Power)
- Power Outlets: 2 (15amp)
- Power: 50Hz/240v
- LwA 78-85 dBa (LAeq 57dBa)*
(* The LAeq noise level is calculated on ¼ load at 7mt for continuous operation in a non-sound reflecting environment) - Operating Hours: 8h at 50% load
- Tank Capacity: 10L
- Starting System: Electric & Pull Start
- Net Weight: 45kg
FEATURES
- Torini 4 stroke engine
- Engine smart control (ESC)
- Compact, lightweight and high quality
- 32 bit inverter core
- Ultra low running noise
- 12 Volt outlet
- Parallel connection capable
- High precise power supply suitable for: computers, mobile phones and other electronic devices.
- Intelligent power supply also suitable for: refrigerators, air conditioners, microwaves, electric tools and similar equipment
- Meets strict Environmental Protection Agency (EPA), Proposed Australian Emissions Standards & strict Californian pollution laws and environmental protection standards
- Dimensions: 570 x 440 x 510mm
ALL SP INVERTER GENERATORS FEATURE A:
- Patented Torini engine with a large volume muffler to increase fuel efficiency and reduce noise.
- Patented permanent magnet inverter generator with ESC (Engine Smart Control) which intelligently controls rpm to further reduce noise and fuel consumption
- Patented 3 way cooling system to lower running temperature and extend engine life
- Patented exhaust gas circulation system where exhaust gas passes through two cavities for double oil separation, thus decreasing oil consumption and extending engine life
INDUSTRIAL TORINI ENGINE
At the heart of the SP generator range, Torini Industrial Engines offer maximum power with maximum reliability.
Equipped with cast iron bore, overhead valve technology & large capacity oil reservoir ensures years of trouble free operation.
- Fast Starting
- Transistorised Ignition
- Smooth Operation
- OHV (Over Head Valve)
- High Efficiency
- Low Oil Protection
(0 reviews) -
Tool KitsSP TOOLS Karting Tool Kit – General Kart Maintenance
KIT INCLUDES:
Quad Combination Spanners - 8, 10, 12 & 13mm
3/8”Dr Sockets and Accessories - (12pt) Sockets 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
- Spark Plug Socket 13/16″
- 45T Ratchet
- Extension Wobble Bar 150mm
Tools - Pliers – Combination, Long Nose and Locking
- Diagonal Cutters
- Snap Ring Pliers Set
- T-Handle Hex Keys – 2.5, 3, 4, 5, 6 & 8mm
- Screwdrivers – SL3x75, SL6x125 #1X100 & 2X100mm
- Hammer – Dual Soft Face
- Tyre Gauge and Valve Core Tool
- 5 Tray Race Technician Box
(0 reviews) -
Hex & Torx KeysSP TOOLS Key Set – Tamper Proof Torx 9pc
- T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 & T-50 Torx Keys
(0 reviews) -
Hex & Torx KeysSP TOOLS Key Set Long Series 9pc
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hex & Torx KeysSP TOOLS Key Set Long Series Torx 9pc
- T10, T15, T20, T25, T27, T30, T40, T45 & T50 Torx Keys
(0 reviews) -
Hex & Torx KeysSP TOOLS Key Set Long Series Torx Tamperproof 9pc
SET INCLUDES:
- T10, T15, T20, T25, T27, T30, T40, T45 & T50 Torx Tamperproof Keys
- Organiser
FEATURES:
- Colour coded for easy identification
- Long Series
- Chrome Plated
- Powder Coated
- Hardened CR-V Steel
(0 reviews) -
Hex & Torx KeysSP TOOLS Key Set Stubby Tamper Proof Torx 9pc
- T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 & T-50 Torx Keys
(0 reviews) -
Diagnostic ToolsSP TOOLS Laser Actuated Tachometer
- Non contact measurement of RPM
- RPM range 2.5–99,999
- Instant and total RPM function
- Memory function
- 50mm–2000mm range with reflective tape
- Accuracy +/- 0.05%
(0 reviews) -
Punch SetsSP TOOLS Letter Punch Set 27pc
- 3mm Lettering height
- Manufactured from quality, induction hardened carbon steel
(0 reviews) -
Automotive SuppliesSP TOOLS Locking Plier Set 10pc
SET INCLUDES:
- 2x C-Type Locking Pliers – 275mm (11″)
- 2x C-Type Locking Pliers – 160mm (6″)
- 1x Long Nose Locking Pliers – 225mm (9″)
- 1x Long Nose Locking Pliers – 150mm (6″)
- 1x Curved Jaw Locking Pliers – 220mm (9″)
- 1x Curved Jaw Locking Pliers – 175mm (7″)
- 2x Sheet Metal Locking Pliers – 200mm (8″)
TOOL FEATURES:
- 888 Series
- Non-slip jaws C-Clamps – Standard jaws provide versatility for a wider range of applications
- Curved Jaw – maximises pressure points for any bolt, nut or locking tool applications
- Long Nose – Long nose for easy access in extended reach applications
- Sheet Metal – Ideal for upholstery work. Bending, forming and crimping sheet metal.
- Heavy duty hardened jaws for increased gripping power
- Ergonomical non-slip rubber handles
- Heavy duty knurled adjuster nut
- Easy quick-release lever
- Includes heavy duty canvas pouch with hanging hooks
(0 reviews) -
Hex & Torx KeysSP TOOLS Magnetic Ball Drive Hex Key Set 13pc
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hex & Torx KeysSP TOOLS Magnetic Ball Drive Hex Key Set 9pc
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hex & Torx KeysSP TOOLS Magnetic Key Set Torx 9pc
- T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 & T-50 Torx Keys
(0 reviews) -
Accessories & PartsSP TOOLS Magnetic Parts Tray
- Great parts storage
- Magnetic based stainless steel tray holds itself and contents in any position avoiding loss of parts
(0 reviews) -
Accessories & PartsSP TOOLS Magnetic Pick Up Tool
- Available in 4 individual sizes
- Strong & lightweight stainless steel shaft
- PVC comfortable cushion handle
- Pocket clip
AVAILABLE IN VARIOUS SIZES
PART NO. PICK-UP WEIGHT EXTENDABLE LENGTH SP31502 1kg 185 to 840mm SP31503 2.3kg 180 to 800mm SP31512 4.5kg 190 to 760mm SP31513 6.8kg 190 to 760mm (0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Automotive SuppliesSP TOOLS Magnetic Wand Pick Up Tool 240mm
Ideal for collecting ferrous materials including metal shavings, screws etc.
Stainless steel construction with rubber handle.Length: 240mm
Diameter: 16mm(0 reviews) -
Automotive SuppliesSP TOOLS Magnetic Wand Pick Up Tool 385mm
Ideal for collecting ferrous materials including metal shavings, screws etc.
Stainless steel construction with rubber handle.Length: 385mm
Diameter: 25mm(0 reviews) -
Accessories & PartsSP TOOLS Mechanics Magnetic Protector
- Vinyl with soft inner to protect car paintwork
- Contains hidden sleeved magnets to hold cover firmly in position
- Resistant to oil, grease & water
- 810mm (w) x 645mm (H)
(0 reviews) -
Diagnostic ToolsSP TOOLS Mechanics Stethoscope
- High grade instrument made from quality materials
- Metal ear piece and thick flexible tubing
- Quality diaphragm assembly
- Assists in locating abnormal mechanical sounds within a component
- Ensures targeted sounds are transmitted clearly
- Minimises phantom and background noises
- A probe length of 285mm and tube length of 600mm
- Extra reach when working in confined areas
- An essential diagnostic tool for fault finding in vehicle engines and engine bays,under-body, transmissions, differentials & bearings
(0 reviews) -
ScrewdriversSP TOOLS Mini Screwdriver Set (Jewellers Set) – 6pc
Set includes:
- 3 x Slotted – 2.0 x 50mm, 2.4 x 50mm & 3.0 x 50mm
- 3 x Phillips – #000 x 50mm, #00 x 50mm & #0 x 50mm
(0 reviews) -
Diagnostic ToolsSP TOOLS Mini-Infrared Thermometer
- LCD display with backlight
- Single dot laser targeting
- Low battery indication
- Auto power off
- -20°C / 270°C Range (-4° F – 518°F)
* NOTE: NOT SAFE FOR USE ON HUMANS OR ANIMALS
(0 reviews) -
Diagnostic ToolsSP TOOLS Multi-Function Smart Tool with Wifi & Built-In Printer – 5 Tools in 1
SMART AUTOMOTIVE TESTING
The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands throughout Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. Combining multiple professional tools into one, this SP Smart Tool is an essential tool for any modern professional workshop. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison.
5 TOOLS IN 1
BATTERY ANALYSER
- Two test modes – Out-of-car Inspection and In-car Inspection
- Analyses battery health and calculates the actual cold starting ability of the battery
- Battery bar code scanning for rapid test setup
- Battery matching enables you to perform a resetting operation on the monitoring unit of the vehicle’s battery, in which the original low battery fault information will be cleared and battery matching will be done
- Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards
- Built-in printing functionality provides instant hard copy test results
TPMS TESTER (Tyre Pressure Monitoring System)
- Provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs
- Ultra wide coverage – Covers more than 98% of vehicles with the Tyre Pressure Monitoring System
- Supports 315MHz/433MHz tyre pressure sensor activation and matching learning
- Reads tyre pressure data, including pressure, tyre temperature, battery status and more
- Can read/copy/write sensor ID value.
DIAGNOSTICS TESTER
- Connects via DLC (Data Link Connector) and quickly accesses all the electronic control units of the vehicle and generates a detailed report about vehicle health
- Compare pre- and post- repair reports and easily identify which DTC’s are cleared and which remain unfixed
- Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Identifies which systems are installed on the vehicle
- Views and captures (records) real-time Live Data and saves the data in text format
- 3 Types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way – Text in list format, waveform graphs or in a merged graph for easy data comparison
- Update vehicle diagnostic software and APK
- Able to record diagnostic data that can serve as valuable information to help you in troubleshooting vehicle problems
- Able to run actuation test to access vehicle-specific subsystem and component tests
VEHICLE MAINTENANCE
This module provides an easy dial to quickly access the most commonly performed service functions as follows:
- Oil Reset Service
- Electronic Parking Brake Reset
- Steering Angle Calibration
- ABS Bleeding
- Gear Learning
- IMMO Service
- Injector Coding
- TPMS (Tyre Pressure Monitor System) Reset
- Battery Maintenance System (BMS) Reset
- Diesel Particulate Filter (DPF) Regeneration
- Electronic Throttle Position Reset
- AFS (Adaptive Front-lighting System) Reset
- AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- Gearbox Matching
- Sunroof Initialisation
- Suspension Calibration
- EGR Adaption
- Windows Calibration
- Seats Calibration
- Tyre Reset
- Language Change
- A/F Reset
- Coolant Bleed
- Transport Mode
- NOx Sensor Reset
- Stop/Start Reset
VIDEOSCOPE SUPPORT
(Available as an attachment – SP61173*)
With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly
KIT INCLUDES
-
- SP Smart Tool
- Diagnostic cable – DLC
- Battery cable clamps
- USB Type-C cable
- 12v auxiliary power outlet cable
- OBD I adaptor box
- Non-16pin adaptor cable kit
All Housed in a heavy duty Blow Mold Case
SPECIFICATIONS
- Operating system: Android 10
- Memory: 4GB
- Storage: 64GB
- Screen: 5.99” Capacitive touch screen
- Resolution:720 x 1440 pixels
- Camera: Rear-facing 8.0MP camera
- Wi-Fi: 2.4GHz/5GHz dual band
- Battery: 4500mAh/7.6v
- Working temperature: 0 to 45°c
- Storage temperature: -10 to 60°c
CONNECTIVITY
- DB15 Diagnostic connector
- USB Type A port x 1 + USB Type C port
- Circular connector for battery tester clamps
- OBD-II, OBD-I (Includes adaptor cables)
- Wi-fi internet connection
(0 reviews) -
Diagnostic ToolsSP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe
SET INCLUDES:
- Alligator Clip Test Lead Set
- Standard Probe Test Lead Set
- Suits all SP Multimeters
ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG
- Insulated finger guarded alligator clips for easy application
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
STANDARD PROBE TEST LEAD SET TO BANANA PLUG
- Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
(0 reviews) -
Diagnostic ToolsSP TOOLS Non-Contact Digital Tachometer
- LCD display with backlight
- Laser target
- Range: 100-30000rpm,1.7-500rps
- Accuracy: +/-0.1% reading (100.0 -9,999rpm), +/-0.02% reading (10,000 -30,000rpm)
- Auto power off
- 1.5V x 3 AAA batteries
- Protective cover and carrying case
(0 reviews) -
Punch SetsSP TOOLS Number Punch Set 9pc
- 3mm Lettering height
- 6 Doubles up as 9
- Manufactured from quality, induction hardened carbon steel
(0 reviews) -
Automotive SuppliesSP TOOLS Nut Splitter Set 4pc
- Set Includes: 9-12mm, 12-16mm, 16-22mm & 22-27mm
- Splitting of seized bolts and/or over tightened bolts without damaging the thread
- Chrome molybdenum steel blades with forged high carbon steel grips
- Hardened, tempered & chrome plated for rust resistance
(0 reviews) -
Tool KitsSP TOOLS Off Road Series Field Service Tool Kit 411pc Metric & SAE
TOOLS INCLUDED IN THIS TOOL KIT
1/4”Dr SOCKETS & ACCESSORIES
- 12pt – 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 & 14mm
- 12pt – 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2”
- 45T Ratchet & Flex Handle
- Wobble Extension Bars – 50 & 150mm
3/8”Dr SOCKETS & ACCESSORIES
- 12pt – 8, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
- 12pt – 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4”
- Spark Plug Sockets – 5/8 & 13/16”
- 45T Ratchet & Flex Handle
- Wobble Extension Bars – 75 & 150mm
- Adaptors – 3/8Fx1/4M & 3/8Fx1/2M
1/2”Dr SOCKETS & ACCESSORIES
- 12pt – 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 30 & 32mm
- 12pt – 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 & 1-1/4”
- 45T Ratchet & Flex Handle
- Wobble Extension Bars – 125 & 250mm
- Adaptor – 1/2Fx3/8M
3/4”Dr SOCKETS & ACCESSORIES
- 12pt – 19, 22, 24, 27, 30, 32, 36, 38, 41, 46, 50 & 55mm
- 12pt – 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8 & 1-7/8”
- 24T Ratchet
- Flex Handle – 450mm
- Extension Bars – 200 & 400mm
- Extendable Handle – 450 to 750mm
- Universal Joint
SPANNERS
- Quad Drive Combination Spanners – 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 30 & 32mm
- Quad Drive Combination Spanners – 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 & 1-1/4”
TOOLS
- Screwdrivers – 3.0×75, 5.5×100, 6.5×38, 6.5×100, 6.5×150 & 8.0x150mm
- Screwdrivers – #0x75, #1×75, #2×38, #2×100, #2×150 & #3x150mm
- Screwdrivers – T8, T10, T15, T20, T25, T27, T30 & T40
- Precision Screwdrivers – 2.0×50, 2.5×50, 3.0×50, #0x50, #00×50 & #000x50mm
- Technicians Bit set – 71pc
- Ratchet Driver Bit Set – 31pc
- Impact Screwdriver Set – 13pc
- Hex Keys – 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm
- Hex Keys – 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8”
- Torx Keys – T10, T15, T20, T25, T27, T30, T40 & T50
- Hex Keys Stubby – 2, 2.5, 3, 4, 5, 6, 8 & 10mm
- Hex Keys Stubby – 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8”
- Torx Keys Stubby – T8, T10, T15, T20, T25, T30, T40 & T50
- Pliers – Combination, Long Nose, Multigrip (x3) & Locking
- Circlip Pliers Set – 4pc
- Cutters – Diagonal – 2pc
- Adjustable Wrenches – 3pc
- Hammers – Ball Pein 16oz & 24oz, Soft/Hard Head – 40mm, Dead Blow, Club 45oz
- Pin Punch & Chisel Set – 10pc
- Gasket Scraper Set – 3pc
- Screw Extractor Set – 5pc
- Thread Files – 2pc
- Electrical Digital Multimeter
- Circuit Tester
- Pick Set – 4pc
- Tweezers Set – 4pc
- Wire Brush Set – 3pc
- Magnetic Pick-up Tool
- Inspection Mirror
- Tape Measure
- Hacksaw
- Knife
- Off Road Series Tool Box – 7 Drawer
(0 reviews) -
Tool KitsSP TOOLS Off Road Series Truck/Ute Box Tool Kit 378pc Metric & SAE 1350mm Wide
TOOLS INCLUDED IN THIS TOOL KIT
1/4”Dr SOCKETS & ACCESSORIES
- 12pt – 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 & 14mm
- 12pt – 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2”
- Torx – T10, T15, T20 & T25
- Inhex – 3, 4, 5 & 6mm, 1/8, 5/32, 3/16, 7/32 & 1/4”
- 45T Ratchet & Flex Handle
- Wobble Extension Bars – 50 & 150mm
3/8”Dr SOCKETS & ACCESSORIES
- 12pt – 8, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
- 12pt – 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4”
- Deep 12pt – 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
- Deep 12pt – 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4”
- Torx – T27, T30, T40, T45, T50 & T55
- Inhex – 6, 7, 8, 9 & 10mm, 3/16, 7/32, 1/4, 5/16 & 3/8”
- Spark Plug Sockets – 5/8 & 13/16”
- 45T Ratchet & Flex Handle
- Wobble Extension Bars – 75 & 150mm
- Adaptors – 3/8Fx1/4M (2) & 3/8Fx1/2M
1/2”Dr SOCKETS & ACCESSORIES
- 12pt – 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 30 & 32mm
- 12pt – 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8 & 1-1/4”
- 45T Ratchet & Flex Handle
- Wobble Extension Bars – 125 & 250mm
- Adaptor – 1/2Fx3/8M
3/4”Dr SOCKETS & ACCESSORIES – 888 Series
- 12pt – 22, 24, 27, 30, 32, 36, 38, 41, 46 & 50mm
- 12pt – 7/8’’, 15/16’’, 1’’, 1-1/8’’, 1-3/16’’, 1-5/16’’, 1-3/8’’, 1-7/16’’, 1-5/8’’, 1-3/4’’, 1-7/8’’ & 2’’
- Ratchet – 495mm
- Sliding Handle – 456mm
- Extension Bars – 100 & 200mm
SPANNERS
- Quad Drive Combination Spanners – 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
- Quad Drive Combination Spanners – 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 & 7/8”
- Flare Nut Spanners – 10×11, 12×13, 14×17 & 19x22mm
- Flare Nut Spanners – 3/8×7/16, 1/2×9/16, 5/8×11/16 & 3/4×7/8”
TOOLS
- Screwdrivers – 3.0×75, 5.5×100, 6.5×38, 6.5×100, 6.5×150 & 8.0x150mm
- Screwdrivers – #0x75, #1×75, #2×38, #2×100, #2×150 & #3x150mm
- Precision Screwdrivers – 2.0×50, 2.5×50, 3.0×50, #0x50, #00×50 & #000x50mm
- Technicians Bit Set – 71pc
- Ratchet Driver Bit Set – 31pc
- Hex Keys – 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm
- Hex Keys – 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8”
- Torx Keys – T10, T15, T20, T25, T27, T30, T40, T45 & T50
- Pliers – Combination, Long Nose, Multigrip & Locking
- Circlip Pliers Set – 4pc
- Cutters – Diagonal
- Adjustable Wrenches – 2pc
- Hammers – Ball Pein 16oz & 24oz, Soft/Hard Head – 40mm
- Pin Punch & Chisel Set – 10pc
- Pick Set – 4pc
- Tape Measure
- Hacksaw
- Knife
- Pry Bar Set – 4pc
- Off Road Series Truck Box – 1350mm
(0 reviews) -
Tool KitsSP TOOLS Off Road Series Truck/Ute Box Tool Kit 502pc Metric & SAE 1735mm Wide
TOOLS INCLUDED IN THIS TOOL KIT
1/4”Dr SOCKETS & ACCESSORIES
- 12pt – 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm
- 12pt – 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2”
- Torx – T10, T15, T20 & T25
- Inhex – 3, 4, 5 & 6mm, 1/8, 5/32, 3/16, 7/32 & 1/4”
- 45T Ratchet, Flex Handle & Universal Joint
- Extension Bars – 50 & 150mm
3/8”Dr SOCKETS & ACCESSORIES
- 12pt – 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 & 22mm
- 12pt – 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 & 7/8”
- 12pt – Deep – 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
- 12pt Deep – 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4”
- Deep 12pt – 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
- Deep 12pt – 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4”
- Torx – T27, T30, T40, T45, T50 & T55
- Inhex – 6, 7, 8, 9 & 10mm, 3/16, 7/32, 1/4, 5/16 & 3/8”
- Spark Plug Sockets – 5/8 & 13/16”
- 45T Ratchet, Flex Handle & Universal Joint
- Extension Bars – 75 & 150mm
- Adaptors – 3/8Fx1/4M (2) & 3/8Fx1/2M
1/2”Dr SOCKETS & ACCESSORIES
- 12pt – 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 30 & 32mm
- 12pt – 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16 & 1-1/4”
- Spark Plug Sockets – 5/8 & 13/16”
- 45T Ratchet, Flex Handle & Universal Joint
- Extension Bars – 75, 125 & 150mm
- Adaptor – 1/2Fx3/8M
3/4”Dr SOCKETS & ACCESSORIES – 888 Series
- 12pt – 22, 24, 27, 30, 32, 36, 38, 41, 46 & 50mm
- 12pt – 7/8’’, 15/16’’, 1’’, 1-1/8’’, 1-3/16’’, 1-5/16’’, 1-3/8’’, 1-7/16’’, 1-5/8’’, 1-3/4’’, 1-7/8’’ & 2’’
- Ratchet – 495mm
- Sliding Handle – 456mm
- Extension Bars – 100 & 200mm
SPANNERS
- Quad Drive Combination Spanners – 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 & 26mm
- Quad Drive Combination Spanners – 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1”
- Flare Nut Spanners – 10×11, 12×13, 14×17 & 19x22mm
- Flare Nut Spanners – 3/8×7/16, 1/2×9/16, 5/8×11/16 & 3/4×7/8”
- Jumbo Combination Spanners – 888 Series – 24, 27, 30, 32, 36, 38, 42, 44, 46 & 50mm
- Jumbo Combination Spanners – 888 Series – 15/16, 1, 1-1/16, 1-1/4, 1-7/16, 1-1/2, 1-11/16, 1-3/4, 1-13/16 & 2’’
TOOLS
- Screwdrivers – 3.0×75, 5.5×100, 6.5×38, 6.5×100, 6.5×150 & 8.0x150mm
- Screwdrivers – #0x75, #1×75, #2×38, #2×100, #2×150 & #3x150mm
- Precision Screwdrivers – 2.0×50, 2.5×50, 3.0×50, #0x50, #00×50 & #000x50mm
- Ratchet Driver Bit Set – 31pc
- Technicians Bit Set – 71pc
- Impact Screwdriver Set – 13pc
- Hex Keys – 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm
- Hex Keys – 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8”
- Torx Keys – T10, T15, T20, T25, T27, T30, T40, T45 & T50
- Hex Keys Stubby – 2, 2.5, 3, 4, 5, 6, 8 & 10mm
- Hex Keys Stubby – 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8”
- Torx Keys Stubby – T8, T10, T15, T20, T25, T30, T40 & T50
- Pliers – Combination, Long Nose, Multigrip & Locking
- Circlip Pliers Set – 4pc
- Cutters – Diagonal
- Adjustable Wrenches – 2pc
- Hammers – Ball Pein 16oz & 24oz, Soft/Hard Head – 40mm
- Pin Punch & Chisel Set – 10pc
- Pick Set – 4pc
- Screw extractor set – 5pc
- Tweezers Set – 4pc
- Wire Brush Set – 3pc
- Magnetic Pick-up Tool
- Inspection Mirror
- Pry Bar Set – 4pc
- Tape Measure
- Hacksaw
- Knife
- Drawer Organiser Trays – 3pc
- Electrical Digital Multimeter
- Circuit Tester
- Off Road Series Truck Box – 1735mm
(0 reviews) -
Material Handling & StorageSP TOOLS Parts Organiser Large
Perfect for storing and organising your bolts, nuts, nails, screws and more!
- The organisers feature a transparent lid that allows for the contents to be viewed easily.
- Ideal for storing nuts, bolts, nails, screws, staples, etc.
- Constructed of durable plastic.
(0 reviews) -
LightingSP TOOLS Pen Light High Power LED Inspection Heavy Duty Aluminium
- High energy LED inspection pen light
- Push switch control with 2 brightness settings
- High quality compact aluminium body
- Beam distance: 109m | 3.5ft
- Water/splash resistant – IP54
- Impact resistant – 1m drop protection
- Removable pocket clip
- Rechareable Li-ion battery – 600mAH
- Charging time: 2-3 Hours
- USB-C charging system
- Weight: 50g | 1.7oz
SPECIFICATIONS: Setting 1
- Lumen: 350 Lumens
SPECIFICATIONS: Setting 2
- Lumen: 90 Lumens
(0 reviews) -
Punch SetsSP TOOLS Pin Punch
- Available in 7 individual sizes: 2, 3, 4, 5, 6, 8 & 10mm
- Designed to drive out pins and rivets
- Chrome Molybdenum (Cr-Mo) alloy steel for strength & durability
- Single piece construction
- Hexagonal shank for additional durability
- Heat tempered to prevent the head from shattering or chipping during striking
- Easy to use, just place punch in position and strike firmly with hammer or mallet
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page