SP TOOLS Infrared Laser Guided Thermometer

Related products

• 

  KLEIN TOOLS

  KLEIN TOOLS Digital Multimeter Electrical Test Kit

  • Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
  • Meter also test batteries, diodes and continuity
  • Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
  • Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
  • ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
  • Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
  • RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
  • Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device

  (0 reviews)

  Add to Quote
• 

  INSTRUMENT CHOICE

  INSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld

  IC-PM-500

  This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.

  Series 500 Lithium Air Quality Portable Monitor features and specifications:

  Features:

  – Simple to use, easy to maintain, multiple applications.

  – Interchangeable gas sensor heads.

  – Field replaceable long life Lithium battery (up to 8 hours).

  – Minimum, maximum and average readings.

  Specifications:

  – Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F

  – Reading functions: Instant, minimum, maximum, average

  – Sensor head: Interchangeable, replaceable

  – Display status indicators: Battery, sensor, standby

  – Sensor calibration: Zero and gain calibration

  – Analog output: 0-5 V

  – Digital Interface: RS-232 to USB

  – Data logging: Up to 8,188 records (2706 incl. Temp/RH)

  – PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.

  – Clock function: Real time

  – Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)

  – Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h

  – Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent

  – Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)

  – Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing

  – Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RH

  Particulate Matter Sensor features and specifications:

  The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.

  – Range: 0.000 to 1.000 mg /m3

  – Measurement Parameters: PM2.5 and PM10

  – Sensor Type: Laser particle counter

  – Minimum Detection Limit: 0.001 mg/m3

  – Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)

  – Resolution: 0.001 mg/3

  – Response Time: 5 Seconds

  – Temp: 0 to 40C

  – Relative Humidity: 0 to 90% non-condensating

   

  (0 reviews)

  Add to Quote
• 

  • 
  • 

  Diagnostic Tools

  INSTRUMENT CHOICE Scarlet Heat Stress Detector

  IC-TWL-1S

  Please note; These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.

  Features:

  – Dash board: Colorful LCD backlight tells you the risk level based on the TWL value. Work-rest schedule and fluid intake are integrated into the display. A countdown timer shows the time remaining before a recommended rest.

  – Cup anemometer captures winds from any direction. You do not have to manually decide the wind direction before measuring the wind speed. Compared to the impeller, wind cup is not restricted to the direction of the wind. It considers all the horizontal components of winds that move the anemometer. A silicone pad covers the top of the bearing to prevent it from dust accumulation.

  – Data Logger : TWL-1S can record data with configurable sampling rate. PC side software helps download the data for further analysis using other analytical tools, and it also synchronizes the date and time of the device with PC.

  – Optimised Globe: TWL theory considers Mean Radiant Temperature (MRT), the most important parameter governing human energy balance. MRT can be derived from globe temperature (GT) measured by the black-bulb thermometer. The smaller the surface area of the black bulb, the greater the effect of the air temperature and air velocity is, thus causing inaccuracy of the calculation of MRT. Therefore, it needs a modifying formula to adjust it to the standard globe bulb with a diameter of 15 cm. The 7.5 cm globe bulb is the optimal size for a portable based on our research and experiments.

  – Sensor Protection : Delicate temperature and humidity sensor are well protected by a replaceable polypropylene (PP) filter in a solid shield, exempted the sensors from dust damage and external strike. A silicone pad protects the mechanism of anemometer from dust.

  Measurement specifications:

  – Air Temperature (Range): 0-60 C

  – Air Temperature (Accuracy): 0.6 C

  – Globe Bulb Indoor (Range) 0-80 C

  – Globe Bulb Indoor (Accuracy): 1.0 C (15…40 C); 1.5 C (others)

  – Globe Bulb Outdoor (Range): 0-80 C

  – Globe Bulb Outdoor (Accuracy): 1.5 C (15…40 C); 2.0 C (others)

  – Relative Humidity (Range): 5-95 %rh

  – Relative Humidity (Accuracy): 3% (at 25 C; 10…90 %rh) 5% (others)

  – Wind Speed (Range): 0.5 – 10 m/s

  – Wind Speed (Accuracy): (2% of reading + 0.2) m/s

  Meter specifications:

  – Operating range electronics: -1060 C

  – Accuracy at 23 5 C: 1.0 %rh / 0.2 K

  – Power supply / consumption: 4 AAA 3V battery, power supply 4 mA consumption without lighting

  – Probe protection: Polypropylene plastic cage

  – Calibration / adjustment: Scarlet calibration kit

  – Measurement interval: 2 seconds

  – Back-light: with Back-light

  – Alarm indicators: Yes

  – Battery indicator: Low Batt. Display

  – Software: Scarlet TWLIT

  – Risk level indicator: Yes. 3 color LCD backlight: red (risk), yellow (med), green (safe)

  – Data logger: Yes. Min data rate 10 min, 2,000 data.

  – Connection Interface: Mini USB (UART)

  – Enclosure material: ABS

  (0 reviews)

  Add to Quote
• 

  • 
  • 

  INSTRUMENT CHOICE

  INSTRUMENT CHOICE Kestrel 5400 Heat Stress WBGT Meter (Safety Orange)

  IC-0854ORA

  IC-0854VORA (with Vane Mount)

   

  Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.

  Features:

  – Flag warnings via loud buzzer & LED beacon!

  – Takes 1 AA battery (instead of 2 AAA)

  – Battery door is in the back, sealed away from the motherboard, should your battery leak as was common with all the 4000 series. All 5000 battery doors are the same and interchangeable.

  – Slightly larger and improved higher contrast / resolution screen for any lighting (even sunlight) and easy on your eyes.

  – Intuitive user-interface screen navigation

  – Multiple Languages (English, French, German, Spanish)

  – Scratch and breakage-resistant window

  – All meters include both options of Red (NV – Night Vision) & White backlights.

  – Slightly bigger, more robust, though not really noticeable difference.

  – Roughly 10,000 data points. 4000 series all had under 5000 data points.

  Measures:

  – Altitude

  – Barometric Pressure

  – Density Altitude

  – Dew Point Temperature

  – Globe Temperature

  – Heat Stress Index

  – Naturally Aspirated Wet Bulb Temperature

  – Relative Humidity

  – Station Pressure (Absolute Pressure)

  – Temperature

  – Thermal Work Limit (TWL)

  – Wet Bulb Temperature (Psychrometric)

  – Wet Bulb Globe Temperature (WBGT)

  – Wind Chill

  – Wind Speed

  Have you seen a cheaper Grey Import online? You need to read this before purchasing:

  Kestrel meters from the USA do NOT come with a C-Tick, which is required to be imported to AU.

  Warranty without a C-Tick will not be covered through the AU distributor/Reseller and will not be their responsibility. In order to receive a unit with the required C-Tick, you must purchase it from an authorized Australian retailer/distributor. You cannot purchase these meters in the USA or anywhere else. If a meter is shipped to you from the USA, you risk the meter being destroyed at customs.

  All Kestrel meters supplied by Instrument Choice come with a C-Tick and we offer the full 5 year warranty

  (0 reviews)

  Add to Quote This product has multiple variants. The options may be chosen on the product page