CHEMTOOLS Thread Sealant 8577 Medium Strength 50ml
Chemtools 8577 Thread Sealant, Medium Strength 50ml
Designed for the locking and sealing of metal threaded pipes and fittings. Cures rapidly in the absence of air between close fitting metal surfaces and provide low-pressure resistance immediately after application. Ideal to seal against gases, water, LPG, hydrocarbons, oils and other chemicals.
Applications:
Ideal for locking and sealing of threaded metal pipes and fittings
Designed for coarse threads, Suitable for stainless steel surface
Colour: Yellow
Specific Gravity: 1.09
Torque Inch Break/Prevail: 180/62 20/7
Viscosity Cps: 24,000 / 80,000 Thixotropic
Temperature range -50°C to 80° C
Related products
-
Industrial
CRC Zinc It 350g
CRC ZINC IT is a single component zinc rich compound with a special epoxy binder and contains 95% of the highest purity zinc in the dried film, to give galvanic rust prevention.
Recommended for use on structural steel, trailers, roofs, guard rails, welding seams, rivet holes, fencing, storage tank transformers, power generation equipment, off shore oil rigs, ships, railroad equipment, substation equipment, transmission towers, touch up over galvanized coatings, coastal and ship borne installations subject to severe salt water and salt spray corrosion.
Easy to apply – aerosol only. Long term protection to steel because of cathodic action. Metallic zinc coating is universally accepted as the best method of rust prevention. Flexible continuous protective film. Does not contain lead. Excellent weldability.
(0 reviews) -
Industrial
CRC Tac2 Adhesive Lubricant 300g
CRC TAC2 is a tough adhesive lubricant that bonds to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that lead to metal fatigue.
Recommended for all types of chain drives, open gears, car wash equipment, bottling plant, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks, wire ropes and marine applications.
Resists cold, hot and salt water wash off and high temperature sling off. Reduces wear and friction. Lubricates effectively chain drives, open gears, pulleys, wire ropes, conveyors. Penetrates vital chain pin and bushing areas and wire rope strands.
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sikaflex®-291
Multifunctional adhesive sealant for marine applicationsSikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Low odour
- Non-corrosive
- Can be over painted
- Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sikaflex®-252
Elastic adhesive for vehicle assembly bondingSikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Can be painted
- Vibration-damping
- Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews)