[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

SP TOOLS Inline Ignition Spark Tester

FEATURES

  • Checks whether there is high tension spark potential at the spark plug
  • ‘‘Hands free’’ operation means no risk of electric shock to user
  • Ideal for modern vehicles with sensitive electronics
  • Easy to use – Remove rubber boot from spark plug, insert inline tester & place tester boot on plug.
  • Turn the engine over – Tester light will glow if ignition spark is being sent to the cylinder.

In Stock
SKU: SP61030 Categories: , , ,

Related products

  • Diagnostic Tools

    SP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe

    SET INCLUDES:

    • Alligator Clip Test Lead Set
    • Standard Probe Test Lead Set
    • Suits all SP Multimeters

    ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG

    • Insulated finger guarded alligator clips for easy application
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A

    STANDARD PROBE TEST LEAD SET TO BANANA PLUG

    • Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A
    (0 reviews)
    Add to Quote
  • Electrical Testers

    FLUKE PRV240FS Proving Unit
    • Prove operation of FieldSense function on T6 electrical testers
    • Reduce risk of shock and arc flash by validating tool operation
    • Source both AC and DC steady-state voltage (240 V AC/DC)
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    KLEIN TOOLS Digital Multimeter Electrical Test Kit
    • Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
    • Meter also test batteries, diodes and continuity
    • Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
    • Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
    • ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
    • Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
    • RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
    • Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    KLEIN TOOLS Test Kit with Multimeter, Non-Contact Volt Tester, Receptacle Tester
    • Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2MΩ resistance
    • Non-Contact Voltage Tester Cat. No. NCVT1P has a bright green LED to indicate the tester is working; it changes to red and audible tones sound when a voltage is detected
    • NCVT1P has a high-intensity, bright red LED that illuminates and an audible tone when a voltage is detected from the 50 to 1000V AC power operating range
    • Receptacle tester detects wiring configurations and indicates correct wiring, as well as identifying common wiring faults
    • Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of the ground, multiple hot wires, or a combination of defects
    • MM300 multimeter tests continuity with visual and audible continuity indicators
    • Test leads included for Cat. No. MM300; batteries included for Cat. Nos. NCVT1P and MM300
    (0 reviews)
    Add to Quote