[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

SP TOOLS Digital Multimeter – Deluxe Automotive – 0.8 to 100V

FEATURES

  • Measures DC/AC voltage, DC/AC current (max 10A), resistance, capacitance, frequency (electrial & electronic), continuity & diode check
  • True-RMS measurements
  • Large 6000 count digital LCD display with backlight
  • Rugged design for heavy duty use
  • Auto power off
  • Auto ranging
  • Hold function
  • Includes probe test leads
  • Cat III 1000V

SPECIFICATIONS

  • DC voltage detection: 2V / 20V / 100V
  • Resistance detection: 2000 Ω / 20K Ω / 200K Ω / 2M Ω / 20M Ω
  • On-off detection: 2000 Ω / beep less than 50 Ω

In Stock
SKU: SP62016 Categories: , , , ,

Related products

  • Diagnostic Tools

    INSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)

    Kestrel-1000

    Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.
    The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.
    The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.
    The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.

    6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)

    What does the Kestrel-1000 Measure?

    – Current Wind Speed

    – Average Wind Speed

    – Maximum Wind Gust

    Features:

    – Aviation green electroluminescent back light

    – Stores maximum and average recordings
    – Auto shut down after 45 minutes with no activity
    – One touch clear and reset
    – Assembled in the U.S.
    – Data Hold Function
    – Large LCD screen
    – Protective Cover
    – Waterproof and floats
    – Patented user-replaceable impeller

    – Neck lanyard

    Specifications:

    – Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B

    – Display updates every second
    – Accuracy Rating: Within three percent

    – Operational Temperature: -10C to 50 C

    Power Requirements:

    – CR2032

    Dimensions:
    – 122 mm x 42 mm x 18 mm

     

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE CR Digital Crane Scale
    Features:

    – Die Cast Aluminum enclosure
    – 3 x AA Battery power supply
    – 20 mm LCD Display Waterproof front panel buttons
    – Stainless Steel Top Shackle Simple 3 button operation
    – Stainless Steel Bottom Hook
    – Choice of four colours depending on capacity
    – Lightweight at only 620 grams
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Diagnostic Tools

    INSTRUMENT CHOICE WindLog – Wind Data Logger
    ICWindlog
    The WindLog is a compact wind data logger designed to accurately measure and record wind speed, direction, and gust for optimizing turbine placement and performance. Includes WindSoft free software package to generate statistics, graphs, and reports.
    The WindLog samples data every second and stores both average and gust readings at the user-selected interval. User selectable logging intervals range from 1-minute to 1-hour. The 2 MB memory can record for over three months at a 1-minute rate and store over a years worth of wind data at a 10-minute logging interval.
    The Mini-Aervane wind sensor is equipped with low friction race bearings. This reduces the threshold to approximately 1 mile per hour. Wind extension cables that separate the wind sensor from the WindLog are available in 50-foot or 100-foot length. The wind direction sensor has a 16-point resolution. Logged direction readings are averaged readings.
    The data logger operates on 3 AA Alkaline or Lithium batteries. Batteries are not included. Lithium batteries are recommended for cold environments. The typical life should be around six months. When connected to a computer, the WindLog will use the USB ports power to run, further extending the battery life. The WindLog ships with a 15-foot USB cable.
    Each WindLog ships with a free Windows-based application, WindSoft. The software uses an SQLite database to track and record wind information. While connected, WindSoft will update the database every minute. Downloaded data is integrated into the database. By combining both logged and real-time data, the WindLog can be used both online and offline. It also can export CSV files for use with Microsoft Excel or any other application that supports CSV files.
    The WindLog includes a support mast that can be used with the RainWise Mono Mount and Tripod. The mast may also be attached to a support structure using U-bolts or lag screws.
    3 Year Warranty (2 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
    Wind Log Features:
    – 2MB flash memory data logger
    – Mini-Aervane wind sensor
    – WindSoft free software package
    – Support mast
    – 15-ft USB Cable
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    KLEIN TOOLS Digital Multimeter Electrical Test Kit
    • Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
    • Meter also test batteries, diodes and continuity
    • Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
    • Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
    • ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
    • Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
    • RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
    • Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
    (0 reviews)
    Add to Quote