[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

INSTRUMENT CHOICE Scarlet Heat Stress Detector

IC-TWL-1S
Please note; These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.
Features:

– Dash board: Colorful LCD backlight tells you the risk level based on the TWL value. Work-rest schedule and fluid intake are integrated into the display. A countdown timer shows the time remaining before a recommended rest.

– Cup anemometer captures winds from any direction. You do not have to manually decide the wind direction before measuring the wind speed. Compared to the impeller, wind cup is not restricted to the direction of the wind. It considers all the horizontal components of winds that move the anemometer. A silicone pad covers the top of the bearing to prevent it from dust accumulation.
– Data Logger : TWL-1S can record data with configurable sampling rate. PC side software helps download the data for further analysis using other analytical tools, and it also synchronizes the date and time of the device with PC.
– Optimised Globe: TWL theory considers Mean Radiant Temperature (MRT), the most important parameter governing human energy balance. MRT can be derived from globe temperature (GT) measured by the black-bulb thermometer. The smaller the surface area of the black bulb, the greater the effect of the air temperature and air velocity is, thus causing inaccuracy of the calculation of MRT. Therefore, it needs a modifying formula to adjust it to the standard globe bulb with a diameter of 15 cm. The 7.5 cm globe bulb is the optimal size for a portable based on our research and experiments.
– Sensor Protection : Delicate temperature and humidity sensor are well protected by a replaceable polypropylene (PP) filter in a solid shield, exempted the sensors from dust damage and external strike. A silicone pad protects the mechanism of anemometer from dust.
Measurement specifications:

– Air Temperature (Range): 0-60 C

– Air Temperature (Accuracy): 0.6 C
– Globe Bulb Indoor (Range) 0-80 C
– Globe Bulb Indoor (Accuracy): 1.0 C (15…40 C); 1.5 C (others)
– Globe Bulb Outdoor (Range): 0-80 C
– Globe Bulb Outdoor (Accuracy): 1.5 C (15…40 C); 2.0 C (others)
– Relative Humidity (Range): 5-95 %rh
– Relative Humidity (Accuracy): 3% (at 25 C; 10…90 %rh) 5% (others)
– Wind Speed (Range): 0.5 – 10 m/s
– Wind Speed (Accuracy): (2% of reading + 0.2) m/s
Meter specifications:

– Operating range electronics: -1060 C

– Accuracy at 23 5 C: 1.0 %rh / 0.2 K
– Power supply / consumption: 4 AAA 3V battery, power supply 4 mA consumption without lighting
– Probe protection: Polypropylene plastic cage
– Calibration / adjustment: Scarlet calibration kit
– Measurement interval: 2 seconds
– Back-light: with Back-light
– Alarm indicators: Yes
– Battery indicator: Low Batt. Display
– Software: Scarlet TWLIT
– Risk level indicator: Yes. 3 color LCD backlight: red (risk), yellow (med), green (safe)
– Data logger: Yes. Min data rate 10 min, 2,000 data.
– Connection Interface: Mini USB (UART)
– Enclosure material: ABS

In Stock
Categories: ,

Related products

    Diagnostic Tools

    INSTRUMENT CHOICE WBGT Heat Stress Meter
    IC800036
    Please note: These units do not come with formal calibration certificates, if required please contact us to ensure the correct certificate can be provided.

    Measure heat stress in the field

    Benefits and Features:
    15 Second Response Time
    Audible Alarm
    Adjustable to your WBGT Threshold
    Indoor/Outdoor Settings
    Tripod Threads

    Government organizations such as OSHA have set recommended heat stress limits for various activities. WBGT (Wet Bulb Globe Temperature) provides the most accurate determination of the heat stress index based on the cumulative effect of air temperature, air movement, relative humidity, and radiant heat. WBGT Heat Stress Meter IC800036 is a light-weight meter compact enough to carry anywhere to avoid heat exhaustion in public health, sports, military and industrial activities. Highly accurate readings with a typical response time of only 15 seconds. Provides settings for both indoor and outdoor activity and includes an audible alarm, adjustable to your WBGT threshold. Can be mounted on standard camera tripod (not supplied).

    Globe diameter: 40 mm
    Meter dim: 255 50 30 mm
    Weight: 126 g

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)

    Kestrel-1000

    Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.
    The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.
    The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.
    The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.
    6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)

    What does the Kestrel-1000 Measure?
    – Current Wind Speed

    – Average Wind Speed
    – Maximum Wind Gust

    Features:
    – Aviation green electroluminescent back light

    – Stores maximum and average recordings
    – Auto shut down after 45 minutes with no activity
    – One touch clear and reset
    – Assembled in the U.S.
    – Data Hold Function
    – Large LCD screen
    – Protective Cover
    – Waterproof and floats
    – Patented user-replaceable impeller
    – Neck lanyard

    Specifications:
    – Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B

    – Display updates every second
    – Accuracy Rating: Within three percent
    – Operational Temperature: -10C to 50 C

    Power Requirements:
    – CR2032

    Dimensions:
    – 122 mm x 42 mm x 18 mm

     

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE CR Digital Crane Scale
    Features:

    – Die Cast Aluminum enclosure
    – 3 x AA Battery power supply
    – 20 mm LCD Display Waterproof front panel buttons
    – Stainless Steel Top Shackle Simple 3 button operation
    – Stainless Steel Bottom Hook
    – Choice of four colours depending on capacity
    – Lightweight at only 620 grams
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld

    IC-PM-500

    This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.

    Series 500 Lithium Air Quality Portable Monitor features and specifications:
    Features:
    – Simple to use, easy to maintain, multiple applications.
    – Interchangeable gas sensor heads.
    – Field replaceable long life Lithium battery (up to 8 hours).
    – Minimum, maximum and average readings.
    Specifications:
    – Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F
    – Reading functions: Instant, minimum, maximum, average
    – Sensor head: Interchangeable, replaceable
    – Display status indicators: Battery, sensor, standby
    – Sensor calibration: Zero and gain calibration
    – Analog output: 0-5 V
    – Digital Interface: RS-232 to USB
    – Data logging: Up to 8,188 records (2706 incl. Temp/RH)
    – PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.
    – Clock function: Real time
    – Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)
    – Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h
    – Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent
    – Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)
    – Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing
    – Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RH
    Particulate Matter Sensor features and specifications:
    The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.
    – Range: 0.000 to 1.000 mg /m3
    – Measurement Parameters: PM2.5 and PM10
    – Sensor Type: Laser particle counter
    – Minimum Detection Limit: 0.001 mg/m3
    – Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)
    – Resolution: 0.001 mg/3
    – Response Time: 5 Seconds
    – Temp: 0 to 40C
    – Relative Humidity: 0 to 90% non-condensating

     

    (0 reviews)
    Add to Quote