View cart “CRC Brakleen Nf 500g” has been added to your cart.
SIKA Sika Boom® AP
MULTI-POSITION, HIGH YIELD EXPANDING FOAM
Sika®Boom®-AP is a 1-component, high expanding, fast curing polyurethane foam suitable for multi-position applications.
1-component
Multi-positioning foam; application in all positions
Easy application with nozzle
Sika Boom® AP is used for fixing, insulating and filling connection joints around window and door frames, pipe entries, air conditioning vents and roller blind housings.
Sika Boom® AP provides insulation against noise, cold and draughts after single application.
Advantages
1-component
Multi-positioning foam; application in all positions
CRC TAC2 is a tough adhesive lubricant that bonds to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that lead to metal fatigue.
Recommended for all types of chain drives, open gears, car wash equipment, bottling plant, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks, wire ropes and marine applications.
Resists cold, hot and salt water wash off and high temperature sling off. Reduces wear and friction. Lubricates effectively chain drives, open gears, pulleys, wire ropes, conveyors. Penetrates vital chain pin and bushing areas and wire rope strands.
Multifunctional adhesive sealant for marine applications
Sikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).
Bonds well to a wide variety of substrates
Good ageing and weathering resistance
Elastic
Bonds well to a wide variety of substrates
Good ageing and weathering resistance
Elastic
Low odour
Non-corrosive
Can be over painted
Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
1-component neutral cure roof and gutter silicone sealant
SikaSeal® Roof & Gutter is a one-component, neutral curing, low odour silicone sealant with excellent adhesion to most construction surfaces.
SikaSeal® Roof & Gutter cures through the absorption of atmospheric moisture to give a tough but flexible waterproof seal.
Neutral cure
Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
Non-sag
Roofs
Gutters
Polycarbonate roof sheeting
Around plumbing fixtures and penetrations
General interior & exterior sealing around the home
Advantages
Neutral cure
Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
Sikaflex®-227 is a 1-component polyurethane sealant designed for car body sealing. It cures on exposure to atmospheric moisture to a durable elastomer. It adheres well to a wide variaty of substrates.
Short cut-off string
Fast skinning
Low odour
Short cut-off string
Fast skinning
Low odour
Overhead work possible
Bonds well to a wide variety of substrates
Can be sanded
Can be painted
Resistant to ageing
Silicone free
Usage
Sikaflex®-227 is suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound deadening measures in crash body repair and car body construction. Suitable substrates are metal primers and paint coatings (2-c systems), metals, painted plastics and plastics.
Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-227 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.