CHEMTOOLS Gasket Sealant 8518 50ml
Chemtools 8518 Gasket Sealant, Easy Disassembly 50ml
A flexible, solvent resistance high viscosity anaerobic gasket sealant, which develops medium strength in a short time. The compound cures in the absence of air between close fitting metal surfaces. 8518 is a flexible gasketing sealant, which will flex with minor flange movements.
Applications:
Typically used as a form-in-place on rigid flanged connections.
Thixotropic nature reduces the migration of liquid product after application.
Colour: Red
Cure State: Flexible
Viscosity Cps: 800,000 / 3,750,000 Thixotropic
Gap Fill:
Unprimed: 0.254 mm
Primed: 1.27 mm
Cure:
Unprimed: 1-2 Hours
Primed: 15 mins – 2 Hours
Temperature range: -55°C to 150° C
Related products
-
Industrial Chemical Lubricants & Adhesives
SIKA Sika® Primer-209 D
Pigmented, solvent based primer for paints and plasticsSika® Primer-209 D is a solvent-based, black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation step on certain plastic substrates.Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS, acrylics, alkyds/melamine, powder coatings and baking varnishes.
Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews) -
Industrial
CRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA Sikaflex®-291
Multifunctional adhesive sealant for marine applicationsSikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Bonds well to a wide variety of substrates
- Good ageing and weathering resistance
- Elastic
- Low odour
- Non-corrosive
- Can be over painted
- Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
Industrial Chemical Lubricants & Adhesives
SIKA SikaSeal® Roof & Gutter
1-component neutral cure roof and gutter silicone sealantSikaSeal® Roof & Gutter is a one-component, neutral curing, low odour silicone sealant with excellent adhesion to most construction surfaces.
SikaSeal® Roof & Gutter cures through the absorption of atmospheric moisture to give a tough but flexible waterproof seal.- Neutral cure
- Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
- Non-sag
- Roofs
- Gutters
- Polycarbonate roof sheeting
- Around plumbing fixtures and penetrations
- General interior & exterior sealing around the home
Advantages
- Neutral cure
- Excellent adhesion to most common construction materials such as: glass, enamel, ceramics, tiles, most metal* (see Important Considerations), most plastic, rubber, concrete and grouts
- Non-sag
- Great tooling characteristics
- Interior and exterior usage
- Fast curing
- Minimum movement capability ±25%
- High temperature resistance (-40°c to +150°c)
(0 reviews)