Wind Farm Supplies

• Quickly tune-up cars, trucks, marine and recreational vehicles
• Works on conventional, electronic and computer controlled ignition systems on both adjustable and nonadjustable timing systems
• Patented Skip circuitry – Tests up to 10,000RPM
• Dial type timing advance (0˚- 60˚ score)
• Heat resistant metal inductive pick-up
• One handed operation
• Detachable leads for easy replacement and use
• Protective hand guard for added safety
• Rotating barrel for better aim at timing mark
• Easy access slim-line barrel
• Optical correct lens

• Designed to work with OBDII compliant vehicles including next generation protocol, Control Area Network (CAN). Operation relies on access being provided by the vehicle manufacturer, for which legislation was introduced in Australia & NZ 2006, USA – 1996, Europe (petrol) 2001, Europe (diesel) 2004.
  Note: This model is not compatible with Japanese manufactured vehicles using JOBD protocol.
• Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
• Supports multiple trouble code requests: Generic codes, pending codes and manufacturer specific codes
• Code definitions are displayed on unit screen
• Reviews the emission readiness status of OBDII Monitors
• Determines malfunction indicator lamp (MIL) status
• Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that supports Mode 9
• Reviews the live data on unit screen
• Easy to use with one plug in, highly reliable and accurate
• Stand-alone unit with no need for an additional laptop/computer to operate
• Small in size and comfortably fits in the palm of your hand
• Unit updates via internet by USB cable
• Software CD with over 10,000 DTC definitions included
• No batteries needed as the unit is powered via OBD2 cable

• Set includes: Test Leads , K-type Temperature Probe, Inductive Pick-up, 9v Battery & Canvas Bag
• RPM measurement for 2–10 cylinder automotive engines using the inductive pick-up
• Oversized high contrast 9999 count LCD display with backlight
• 14 functions including DC/AC voltage, DC/AC current (max 20A), resistance, RPM (tach), dwell angle, duty cycle frequency, MS-pulse, temperature (ºC/ºF), capacitance, continuity & diode check
• Read pulse duty cycle & dwell angle for electronic fuel injection feedback carburettors and ignition
• Fused current inputs & overload protection on all ranges
• Measure milliseconds pulse width to test on-time of fuel injectors, idle air control motors & electronic transmission controls
• Data hold and relative functions
• Auto power off
• Auto ranging
• Back light
• Safety design cat 3 & cat 4

• 2000 counts digital display
• Safety Design Cat 3 600v
• Non-contact ACV detection
• Data hold
• Auto ranging
• Type K temperature input
• Continuity, diode test, resistance
• Auto power off with low battery indicator
• Pocket sized

• Non contact measurement of RPM
• RPM range 2.5–99,999
• Instant and total RPM function
• Memory function
• 50mm–2000mm range with reflective tape
• Accuracy +/- 0.05%

• High grade instrument made from quality materials
• Metal ear piece and thick flexible tubing
• Quality diaphragm assembly
• Assists in locating abnormal mechanical sounds within a component
• Ensures targeted sounds are transmitted clearly
• Minimises phantom and background noises
• A probe length of 285mm and tube length of 600mm
• Extra reach when working in confined areas
• An essential diagnostic tool for fault finding in vehicle engines and engine bays,under-body, transmissions, differentials & bearings

• LCD display with backlight
• Single dot laser targeting
• Low battery indication
• Auto power off
• -20°C / 270°C Range (-4° F – 518°F)

* NOTE: NOT SAFE FOR USE ON HUMANS OR ANIMALS

SMART AUTOMOTIVE TESTING

The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands throughout Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. Combining multiple professional tools into one, this SP Smart Tool is an essential tool for any modern professional workshop. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison.

5 TOOLS IN 1

BATTERY ANALYSER

• Two test modes – Out-of-car Inspection and In-car Inspection
• Analyses battery health and calculates the actual cold starting ability of the battery
• Battery bar code scanning for rapid test setup
• Battery matching enables you to perform a resetting operation on the monitoring unit of the vehicle’s battery, in which the original low battery fault information will be cleared and battery matching will be done
• Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards
• Built-in printing functionality provides instant hard copy test results

TPMS TESTER (Tyre Pressure Monitoring System)

• Provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs
• Ultra wide coverage – Covers more than 98% of vehicles with the Tyre Pressure Monitoring System
• Supports 315MHz/433MHz tyre pressure sensor activation and matching learning
• Reads tyre pressure data, including pressure, tyre temperature, battery status and more
• Can read/copy/write sensor ID value.

DIAGNOSTICS TESTER

• Connects via DLC (Data Link Connector) and quickly accesses all the electronic control units of the vehicle and generates a detailed report about vehicle health
• Compare pre- and post- repair reports and easily identify which DTC’s are cleared and which remain unfixed
• Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
• Identifies which systems are installed on the vehicle
• Views and captures (records) real-time Live Data and saves the data in text format
• 3 Types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way – Text in list format, waveform graphs or in a merged graph for easy data comparison
• Update vehicle diagnostic software and APK
• Able to record diagnostic data that can serve as valuable information to help you in troubleshooting vehicle problems
• Able to run actuation test to access vehicle-specific subsystem and component tests

VEHICLE MAINTENANCE

This module provides an easy dial to quickly access the most commonly performed service functions as follows:

• Oil Reset Service
• Electronic Parking Brake Reset
• Steering Angle Calibration
• ABS Bleeding
• Gear Learning
• IMMO Service
• Injector Coding
• TPMS (Tyre Pressure Monitor System) Reset
• Battery Maintenance System (BMS) Reset
• Diesel Particulate Filter (DPF) Regeneration
• Electronic Throttle Position Reset
• AFS (Adaptive Front-lighting System) Reset
• AdBlue Reset (Diesel Engine Exhaust Gas Filter)
• Gearbox Matching
• Sunroof Initialisation
• Suspension Calibration
• EGR Adaption
• Windows Calibration
• Seats Calibration
• Tyre Reset
• Language Change
• A/F Reset
• Coolant Bleed
• Transport Mode
• NOx Sensor Reset
• Stop/Start Reset

VIDEOSCOPE SUPPORT

(Available as an attachment – SP61173*)

With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly

• 4 function digital display readout and easy to read backlit LCD
• Heavy duty inductive pick-up and clamps
• One handed operation
• Detachable leads for easy replacement and use
• Protective hand guard for added safety
• Rotating barrel for better aim at timing mark and LCD viewing angle
• Patented Skip circuitry – Tests up to 10,000 RPM
• Easy access slim-line barrel
• Optical correct lens
• Shock resistant boots
• Tachometer: 249 to 9,990 RPM (+/-1% accuracy)
• Advance degrees (2 and 4 cycle DIS and conventional): 0º to 90º (+/- 5º accuracy)
• Dwell: 0º to 180º /2-12 cylinders (+/-1% accuracy)
• Voltage: 10 to 16 volts DC (+/- 1% accuracy)

TURN YOUR SP SMART TOOL INTO A VIDEOSCOPE

With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly.

FEATURES

• Dimmable front & Side Camera Lights
• Camera Diameter: 5.5mm
• View Angle: 60°
• Resolution: 1280x720Frame Rate: 30fps
• Flexible Camera Tube Length: 1m