VDE Hand Tools
Showing 1–36 of 86 results
-
Screw DriversBEARGRIP Phillips VDE 1000V Screwdrivers
- Insulated blade ensures safe use up to 1,000 Volts.
- Ergonomic handle allows rapid hand repositioning without the tool sticking to the user’s skin.
- Hexagonal design prevents the screwdriver rolling when placed on a flat surface.
- Chemical resistant, easy clean handle.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Screw DriversBEARGRIP Screwdriver Set VDE 1000V
- Insulated blade ensures safe use up to 1,000 Volts.
- Ergonomic handle allows rapid hand repositioning without the tool sticking to the user’s skin.
- Hexagonal design prevents the screwdriver rolling when placed on a flat surface.
- Chemical resistant, easy clean handle.
Components:
Part Number Quantity BG-714-3.0 1 BG-714-3.5 1 BG-714-3.0 1 BG-716-1 1 BG-716-2 1 (0 reviews) -
Screw Drivers
BEARGRIP Slotted VDE 1000V Screwdrivers
- Insulated blade ensures safe use up to 1,000 Volts.
- Ergonomic handle allows rapid hand repositioning without the tool sticking to the user’s skin.
- Hexagonal design prevents the screwdriver rolling when placed on a flat surface.
- Chemical resistant, easy clean handle.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
VDE Hand ToolsGRIPPS Electrical Trade Kit
An end-to-end solution covering the entire suite of hand and power tools used by Electricians.
Tethers up to 31 tools.
Kit Contents
- 1 x H02056 Tape Measure Catch
- 1 x H10100 Bungee Tether Dual-Action 5.0kg
- 1 x H01068 Coil tether Single-Action
- 1 x H01021 Swivel Catch
- 10 x H01007 Tool Catch (Non-Conductive)
- 1 x H01010 V-Gripp Tape
- 1 x H01067 Webbing Wrist Tether Single-Action
- 1 x H01062 Coil Single-Action Wrist Tether (Non-Conductive)
- 1 x H01142 Belt-Loop Anchor
- 1 x H01085-M Slip-On Wrist Anchor (Medium)
- 10 x H01030 Screwlock Cable – 3.0mm x 12cm / 0.1″ x 4.75″
- 1 x H03048 Little Gripper Kit
(0 reviews) -
1000V SocketsITM 3/8″ Dr Metric 1000V Extension Bars
3/8″ Drive 3″ Insulated Extension Bar
- Approved for live working up to 1,000 volts
- Integrated protective insulation with two colours to clearly indicate if there is any damage
- Ball recess on the female end to grip the ratchet
- Ball socket retainer on the male end to securely grip the socket
- Chrome vanadium
- Design and manufactured to DIN3123B and IEC60900
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1000V SocketsITM 3/8″ Dr Metric 1000V Insulated Ratchet
Features
3/8″ Drive Insulated Ratchet- Approved for live working up to 1,000 volts
- 72 teeth giving 5 degree increments between clicks
- Twist reverse for quickly and easily changing between tightening and loosening
- Design and manufactured to DIN3122D and IEC60900
Specifications
- Drive: 3/8″
- No of Teeth: 72
- Reverse Direction: Twist
- Length 2: 8Inch
- Tethering Facility: No
- Insulated: Yes
- Length: 200mm
- Included In:
- TEFSKV19
- TEDV3818
- TTV3814
- TEFXV27
- TEFXV28
- TEFSKV19NZ
(0 reviews) -
1000V SocketsITM 3/8″ Dr Metric 1000V Sockets
3/8″ Drive Insulated Socket
- Approved for live working up to 1,000 volts
- Integrated protective insulation with two colours to clearly indicate if there is any damage
- 6 point single hexagon socket for a better grip
- Chrome vanadium
- Ball recess on the female end to grip the ratchet
- Design and manufactured to DIN3120/3124, ISO2725 and IEC 60900
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversKINCROME TorqueMaster® Blade VDE Screwdriver
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversKINCROME TorqueMaster® Phillips VDE Screwdriver
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Socket SetsKINCROME VDE Socket Set 12 Piece 3/8 Drive – Metric
Contents
• 10 3/8″ Drive VDE Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm• 2 AccessoriesVDE Ratchet Handle 3/8” Drive125mm VDE Extension Bar 3/8” Drive(0 reviews) -
Multi-Grip PliersKNIPEX Alligator
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx.61 HRC: high wear resistance and stable gripping
- Box-joint design: high stability due to double guide
- Robust construction, insensitive to dirt- particularly suitable for outdoor work
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cable & Wire Rope ShearsKNIPEX Cable Cutter – Ratchet Action
- For cutting copper and aluminium single conductors as well as multiple stranded cables
- Not suitable for steel wire and wire ropes
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- One-hand operation using ratchet principle
- Little handforce required due to very high transmission ratio
- Two-stage ratchet drive for easy cutting
- Simple handling as a result of low weight and compact design – can be used even in confined areas
- Guard prevents operators’ fingers being pinched
- High-grade special tool steel, forged, oil-hardened
- Fixed handle with support area for putting down the pliers when cutting
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cable & Wire Rope ShearsKNIPEX Cable Shears
- For cutting copper and aluminium single conductors as well as multiple stranded cables
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- Easy cutting with one-hand operation
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint, self-retaining screw
- High-grade special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cable & Wire Rope ShearsKNIPEX Cable Shears – Surgical Steel
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- No crushing, slight deformation of the cable only
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint
- Shears body: surgical steel, stainless, vaccum-hardened
- Handles: plastic, impact-proof
- With opening spring and locking device
- Blades made of stainless steel
- Oil-hardened and tempered
- Cuts cables up to 10 mm dia./ 24 mm²
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cable & Wire Rope ShearsKNIPEX Cable Shears – Tubular Handle
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cable & Wire Rope ShearsKNIPEX Cable Shears – Twin Cutting Edge
- For cutting copper and aluminium cables
- Not suitable for steel wire and hard drawn copper conductors
- Precision ground, hardened blades
- Clean and smooth cut without crushing and deformation
- By dividing the cutting actions into initial cut (insulating sheath in the front cutting area) and final cut (conductor in the back cutting area), cables up to20 mm can be cut in one-hand operation
- Less effort required due to favourable lever ratio and optimised cutting-edge geometry
- Guard prevents operators’ fingers being pinched
- Adjustable bolted joint, self-retaining screw
- High-grade special tool steel, forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
VDE Hand ToolsKNIPEX Cobra VDE
- Adjustment by shifting one jaw directly on to the workpiece: fast, reliable and comfortable handling
- Opening at the touch of a button apart form the workpiece
- Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
- Good access to the workpiece due to slim size of head and joint area
- Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
- Gripping surfaces with special hardened teeth, teeth hardness approx.61 HRC: high wear resistance and stable gripping
- Box-joint design: high stability due to double guide
- Guard prevents operators’ fingers being pinched
- Chrome vanadium electric steel, forged, oil-hardened
- 250mm
(0 reviews) -
Combination & Multifuntional PliersKNIPEX Combination Pliers
- With gripping zones for flat and round material, suitable for versatile use
- With cutting edges for soft and hard wire
- Long cutting edges for thicker cables
- Cutting edges additionally induction hardened, cutting edge hardness approx.60 HRC
- Special tool steel, forged, oil hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting PliersKNIPEX Diagonal Cutters
- The indispensable diagonal cutter for all-round use
- High quality material and precise workmanship for long service life
- Precision cutting edges for soft and hard wire
- Clean cutting of thin copper wires, also at the cutting-edge tips
- Cutting edges additionally induction hardened, cutting edge hardness approx.62 HRC
- Narrow head style for use in confined areas
- Vanadium electric steel- forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
VDE Hand ToolsKNIPEX Diagonal Cutters Electro Mechanics
- 125mm
- With sharp, precisely aligned cutting edges for soft, hard wire and piano wire
- Cutting edges additionally induction hardened, cutting edge hardness approx.63 HRC
- Lap joint
- Vanadium electric steel- forged, oil-hardened
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
