Industrial Equipment & Supplies
Showing 937–972 of 13395 results
-
Cobalt HSS-Co5BORDO Cobalt HSS-Co5 Jobber Drill Fractional
- Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
- ANSI B94-11
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cobalt HSS-Co5BORDO Cobalt HSS-Co5 Jobber Drill Fractional Set
- Bordo Fractional Cobalt Tough HSS-Co5 Twist Drills.
- ANSI B94-11
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cobalt HSS-Co5
BORDO Cobalt HSS-Co5 Jobber Drill Metric
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cobalt HSS-Co5BORDO Cobalt HSS-Co5 Jobber Drill Metric Set
- Bordo Metric Cobalt Tough HSS-Co5 Twist Drills.
- DIN338
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing the need for end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Cobalt HSS Twist drills are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
COBALT TiAlN Coated Spiral FluteBORDO COBALT TiAlN Coated Spiral Flute
- Bordo Cobalt Spiral Flute Titanium Aluminium Nitride (TiAlN) coated step drills offer unparalleled performance when drilling hard metals such as stainless steel.
- HSS-Co5 material provides increased performance and tool life when machining tough steels.
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- High performance point for faster starting and reduced bit wander.
- No pilot hole required.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
- Titanium Aluminium Nitride (TiAlN) is a thin film coating that was developed from Titanium Nitride.
- TiAlN offers higher temperature resistance than TiN, as well as slightly higher hardness and especially higher hot hardness (i.e. the hardness at high temperatures).
- It is primarily used in high temperature environments above the limits of TiN usage.
- This coating works by forming a thin surface layer of Alumina (Al2O3), or Aluminium Oxide ceramic.
- As the layer wears it continuously reforms.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
COBALT TiAlN Coated Spiral FluteBORDO COBALT TiAlN Coated Spiral Flute Set
- 4-30mm 3 Pce Spiral Flute HSS Cobalt Step Drill Set
- HSS-Co5 (Cobalt) Titanium Aluminium Nitride Coated (TiAlN) Spiral Flute Step Drill Set
- Bordo Cobalt Spiral Flute Titanium Aluminium Nitride (TiAlN) coated step drills offer unparalleled performance when drilling hard metals such as stainless steel.
- HSS-Co5 material provides increased performance and tool life when machining tough steels.
- Bordo step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- High performance point for faster starting and reduced bit wander.
- No pilot hole required.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
- Titanium Aluminium Nitride (TiAlN) is a thin film coating that was developed from Titanium Nitride.
- TiAlN offers higher temperature resistance than TiN, as well as slightly higher hardness and especially higher hot hardness (i.e. the hardness at high temperatures).
- It is primarily used in high temperature environments above the limits of TiN usage.
- This coating works by forming a thin surface layer of Alumina (Al2O3), or Aluminium Oxide ceramic.
- As the layer wears it continuously reforms.
(0 reviews) -
BrushwareBORDO Condensor Tube Brushes Brass Wire
- Brass Wire
- Twisted in wire brushes are known by many names, such as spiral, tube, bottle, pipe and more, but generally they are manufactured using the same construction technique.
- A piece of wire is doubled over and bristle material is inserted between the fold of the wire stem, the wire stem is then twisted into a brush.
- The most common brush “fills” are steel wire, stainless steel wire, brass wire, and nylon.
- All Bordo condensor tube and boiler tube brushes feature a BSW male threaded ferrule.
- They may be used by hand or with power equipment.
- All brushes are available as single or double spiral.
- The double spiral are a heavier construction with a more dense brush face for more aggressive brushing and are ideally suited to use with a power tool.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Condensor Tube Brushes Nylon
- Nylon
- Twisted in wire brushes are known by many names, such as spiral, tube, bottle, pipe and more, but generally they are manufactured using the same construction technique.
- A piece of wire is doubled over and bristle material is inserted between the fold of the wire stem, the wire stem is then twisted into a brush.
- The most common brush “fills” are steel wire, stainless steel wire, brass wire, and nylon.
- All Bordo condensor tube and boiler tube brushes feature a BSW male threaded ferrule.
- They may be used by hand or with power equipment.
- All brushes are available as single or double spiral.
- The double spiral are a heavier construction with a more dense brush face for more aggressive brushing and are ideally suited to use with a power tool.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Condensor Tube Brushes Steel Wire
- Steel Wire
- Twisted in wire brushes are known by many names, such as spiral, tube, bottle, pipe and more, but generally they are manufactured using the same construction technique.
- A piece of wire is doubled over and bristle material is inserted between the fold of the wire stem, the wire stem is then twisted into a brush.
- The most common brush “fills” are steel wire, stainless steel wire, brass wire, and nylon.
- All Bordo condensor tube and boiler tube brushes feature a BSW male threaded ferrule.
- They may be used by hand or with power equipment.
- All brushes are available as single or double spiral.
- The double spiral are a heavier construction with a more dense brush face for more aggressive brushing and are ideally suited to use with a power tool.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CounterboreBORDO Counterbores 180° Single
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CounterboreBORDO Counterbores Set
- 6 Pce 3-10mm 180 Degree Counterbore Set
- Bright finish HSS-Co5 (Cobalt) for extreme tool life.
- Use to enlarge the top of an existing hole to create a cylindrical-shaped opening with a flat bottom that acts as a seat for the head of a screw or wood plug.
- Ideal for use with standard cap screws or socket head screws.
(0 reviews) -
CountersinkBORDO Countersink Single Flute Indexable
- Carbide strip cutter with replaceable insert.
- Clean cutting even at lower RPMs.
- Tri-flat shank faciltiates high torque transmission in standard three jaw chucks.
- Chatter free countersinking and deburring even at low RPMs.
- Excellent surface finish.
- Two cutting edges for longer tool life.
- Cemented carbide insert is an alloy of Tungsten Carbide (WC) and Cobalt (Co).
- B100 is a unique rare metal grade with great heat and cracking resistance.
- TiAlN PVD coated – suitable for applications with low to intermediate cutting speed.
- PVD coated grades are recommended for applications with low feed rate where high edge toughness is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinkBORDO Countersink Single Flute Indexable Carbide Inserts
- cutting edges for longer tool life.
- Cemented carbide insert is an alloy of Tungsten Carbide (WC) and Cobalt (Co).
- B100 is a unique rare metal grade with great heat and cracking resistance.
- TiAlN PVD coated – suitable for applications with low to intermediate cutting speed.
- PVD coated grades are recommended for applications with low feed rate where high edge toughness is required.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsBORDO Deburrer
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsBORDO Deburrer Pen
- Aluminium Handle Pencil Deburrer with SE10 Blade
- Heavy duty aluminium pen body with SE10 blade.
- This heavy duty 3.2mm HSS blade is ideal for straight edge and hole edge deburring.
- Use for deburring materials with spiral chips, such as: steel, aluminium, copper, and plastics.
(0 reviews) -
BurrsBORDO Deburring Blade Holders & Handles
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsBORDO Deburring Blades
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Deck BitsBORDO Deck Bit Pilot Drills
Replacement pilot drill
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Delta Point Bright Finish HSSBORDO Delta Point Bright Finish HSS Metric
- Bordo Metric Delta Point M2-HSS Twist Drills.
- DIN338
- Delta Point drills have a multi-faceted cutting tip.
- Rather than try and modify existing point types, or tweak the grind angles, Delta Point tip design required a revolutionary re-think of drill tip function.
- The overall length of the cutting edge significantly exceeds that of conventional drills.
- This means more edge doing the cutting and the results are simply extraordinary.
- Drilling times for a range of split point and Delta Point drills consistently showed that Delta Point bits were twice as fast in mild steel.
- During independent lifetime testing Delta point drill bits averaged 609 holes in 20mm mild steel, ten times more holes than split point drills.
- DRILLS FASTER LASTS LONGER.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Delta Point Bright Finish HSSBORDO Delta Point Bright Finish HSS Metric Sets
- DIN338
- Delta Point drills have a multi-faceted cutting tip.
- Rather than try and modify existing point types, or tweak the grind angles, Delta Point tip design required a revolutionary re-think of drill tip function.
- The overall length of the cutting edge significantly exceeds that of conventional drills.
- This means more edge doing the cutting and the results are simply extraordinary.
- Drilling times for a range of split point and Delta Point drills consistently showed that Delta Point bits were twice as fast in mild steel.
- During independent lifetime testing Delta point drill bits averaged 609 holes in 20mm mild steel, ten times more holes than split point drills.
- DRILLS FASTER LASTS LONGER.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition. These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SpecialistBORDO Depth Stop Collars for TCT Countersinks – 3 Pce Set
- Depth Stop Collars for TCT Countersinks – 3 Pce Set
- Depth Stop Collars to suit 2202 series TCT Countersinks – 3 Piece Set
- Achieves accurate countersinking depths of 2mm, 4mm or 6mm.
(0 reviews) -
Core DrillsBORDO Diamond Hex Shank Core Drill
- Brilliant Diamond Vacuum Brazed Core Drill.
- Vacuum brazed, self lubricating, wax filled diamond core drills.
- One piece hex shank.
- Suitable for drilling tiles, ceramics, vitrified products, porcelain, natural and composite / engineered stone, monocottura, fibreglass, graphite, carbon fibre, FRP’s, and other highly abrasive materials.
- The wax filled core lubricates the cutting edge allowing dry, water free, drilling.
- Apply spinning core drill to workpiece at an angle so that only the edge is engaged.
- As a small groove begins to form gradually move the drill until the saw is flat and fully engaged with the workpiece.
- Alternatively position the saw using a Bordo adjustable drilling template and commence drilling with the saw flat against the workpiece.
- Drilling using Bordo Brilliant Diamond Core Drills can be done dry however the use of water cooling may extend tool life.
- Water and electricity are a dangerous combination always maintain a safe working environment.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Hex Shank Core DrillsBORDO Diamond Hex Shank Core Drill Set
- Brilliant Diamond Vacuum Brazed Core Drill Set.
- Vacuum brazed, self lubricating, wax filled diamond core drills.
- One piece hex shank.
- Suitable for drilling tiles, ceramics, vitrified products, porcelain, natural and composite / engineered stone, monocottura, fibreglass, graphite, carbon fibre, FRP’s, and other highly abrasive materials.
- The wax filled core lubricates the cutting edge allowing dry, water free, drilling.
- Apply spinning core drill to workpiece at an angle so that only the edge is engaged.
- As a small groove begins to form gradually move the drill until the saw is flat and fully engaged with the workpiece.
- Alternatively position the saw using a Bordo adjustable drilling template and commence drilling with the saw flat against the workpiece.
- Drilling using Bordo Brilliant Diamond Core Drills can be done dry however the use of water cooling may extend tool life.
- Water and electricity are a dangerous combination always maintain a safe working environment.
(0 reviews) -
Diamond Mist DrillBORDO Diamond Mist Drill Bodies
- Diamond Mist Drill Body No. 1
- The Bordo Diamond Mist Drill System consists of a water feed drill body which is used in conjunction with a water bottle swivel set or a pressure water bottle.
- Replaceable diamond cutters affix to a non-wearing shank which joins the cutters to the water feed body.
- The Bordo range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone.
- They produce no-crack, burr-free holes with minimum spalling.
- The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions.
- Rotary only action ensures low noise and vibration.
- Diamond mist drills are designed to deliver the correct amount of lubrication to maximise drill life and optimise drilling performance.
- Cutter size 5.0 to 10.0mm Rotation Speed 15000 to 3000 RPM.
- Cutter size 11.0 to 24.0mm Rotation Speed 7000 to 1500 RPM.
(0 reviews) -
Diamond Mist DrillBORDO Diamond Mist Drill Cutters
- The Bordo Diamond Mist Drill System consists of a water feed drill body which is used in conjunction with a water bottle swivel set or a pressure water bottle.
- Replaceable diamond cutters affix to a non-wearing shank which joins the cutters to the water feed body.
- The Bordo range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone.
- They produce no-crack, burr-free holes with minimum spalling.
- The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions.
- Rotary only action ensures low noise and vibration.
- Diamond mist drills are designed to deliver the correct amount of lubrication to maximise drill life and optimise drilling performance.
- Cutter size 5.0 to 10.0mm Rotation Speed 15000 to 3000 RPM.
- Cutter size 11.0 to 24.0mm Rotation Speed 7000 to 1500 RPM.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Mist DrillBORDO Diamond Mist Drill Sets
- The Bordo Diamond Mist Drill System consists of a water feed drill body which is used in conjunction with a water bottle swivel set or a pressure water bottle.
- Replaceable diamond cutters affix to a non-wearing shank which joins the cutters to the water feed body.
- The Bordo range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone.
- They produce no-crack, burr-free holes with minimum spalling.
- The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions.
- Rotary only action ensures low noise and vibration.
- Diamond mist drills are designed to deliver the correct amount of lubrication to maximise drill life and optimise drilling performance.
- Cutter size 5.0 to 10.0mm Rotation Speed 15000 to 3000 RPM.
- Cutter size 11.0 to 24.0mm Rotation Speed 7000 to 1500 RPM.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Mist DrillBORDO Diamond Mist Drill Shanks
- The Bordo Diamond Mist Drill System consists of a water feed drill body which is used in conjunction with a water bottle swivel set or a pressure water bottle.
- Replaceable diamond cutters affix to a non-wearing shank which joins the cutters to the water feed body.
- The Bordo range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone.
- They produce no-crack, burr-free holes with minimum spalling.
- The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions.
- Rotary only action ensures low noise and vibration.
- Diamond mist drills are designed to deliver the correct amount of lubrication to maximise drill life and optimise drilling performance.
- Cutter size 5.0 to 10.0mm Rotation Speed 15000 to 3000 RPM.
- Cutter size 11.0 to 24.0mm Rotation Speed 7000 to 1500 RPM.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Mist DrillBORDO Diamond Mist Drill Water Bottle Swivel Set
- Diamond Mist Drill Water Bottle Swivel Set
- The Bordo Diamond Mist Drill System consists of a water feed drill body which is used in conjunction with a water bottle swivel set or a pressure water bottle.
- Replaceable diamond cutters affix to a non-wearing shank which joins the cutters to the water feed body.
- The Bordo range of diamond drills are ideally suited to cutting ceramics, porcelain tiles and stone.
- They produce no-crack, burr-free holes with minimum spalling.
- The interchangeable cutters result in a lower cost per hole than some other diamond drill solutions.
- Rotary only action ensures low noise and vibration.
- Diamond mist drills are designed to deliver the correct amount of lubrication to maximise drill life and optimise drilling performance.
- Cutter size 5.0 to 10.0mm Rotation Speed 15000 to 3000 RPM.
- Cutter size 11.0 to 24.0mm Rotation Speed 7000 to 1500 RPM.
(0 reviews) -
Circular Saw BladesBORDO Diamond Saw Blades Diamond Cup Wheels
- Diamond Cup Wheel Single Row.
- Economical cup wheel for flat grinding with fast material removal.
- Ideal for removing imperfections in cured concrete.
- 103, 125 & 180mm diameters.
- Extreme diamond count.
- Maximum material removal.
- Dry grinding.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades General Purpose Continuous Rim
- Enduro Diamond General Purpose Continuous Rim.
- Continuous rim blades have softer bonds for cutting hard materials such as tile, porcelain, granite, stone, glass, and other materials that can chip easily.
- These blades don’t have individual segments but instead have a solid, continuous rim or edge.
- Most continuous rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades General Purpose Segmented Rim
- General purpose.
- 7mm segmented rim produces clean, fast cuts wet and dry.
- Great for cutting a wide variety of non-abrasive materials.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Use when cutting cured concrete, reinforced concrete, clay bricks, hebel®, terracotta tiles, slate, granite, bluestone, fibreglass, reinforced plastics, wall chasing in brick & concrete.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades Green Concrete and Asphalt
- Green concrete and asphalt blade.
- 8mm segmented rim produces clean, fast cuts wet and dry.
- Segmented blade for abrasive materials.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Use when cutting asphalt and green concrete, concrete block, light weight concrete, concrete & ceramic roof tiles, sandstone, limestone, slate, hebel®, mortar joints, and compressed fibre cement sheet.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades Hard Brick & Masonry
- 350mm Segmented Diamond Hard Brick Blade
- Hard brick and masonry.
- 10mm segmented rim for fast cutting with enhanced blade/substrate interface cooling for long blade life.
- Optimally designed for cutting cured concrete and stone.
- Extreme concentration of diamond for fast, clean cutting and long blade life.
- Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
- Use when cutting bluestone, hard clay brick, fire brick, cured concrete, concrete block, concrete brick, granite, marble, wall chasing in hard brick & concrete.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews) -
Circular Saw BladesBORDO Diamond Saw Blades PCD Saw Blades
- Enduro Polycrystalline Diamond (PCD) – cement sheet, plasterboard, MDF, chipboard, plywood & plastic.
- High speed, low dust cutting in fibre cement and blue board.
- Available in 160mm to 305mm.
- Extremely hard and durable polycrystalline diamond (PCD) teeth for extreme blade life.
- Thin kerf design combined with a low tooth count ensures high speed cutting and reduced dust compared with continuous rim diamond blades.
- Designed to cut fibre cement products, plasterboard, MDF, chipboard, plywood and plastic.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Diamond Saw BladesBORDO Diamond Saw Blades Super Turbo
- Enduro Diamond Super Turbo Fast Cut General Purpose
- Turbo blades typically have soft to medium bonds for a variety of general purpose to specific cutting applications.
- Turbo blades feature a continuous rim with an edge that is serrated.
- This serrated edge is designed to give the blade faster cutting speeds while maintaining a smooth cut, combining the best qualities from both segmented and continuous rim blades.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Circular Saw BladesBORDO Diamond Saw Blades Tradecut Diamond Continuous Rim
- Tradecut Diamond Saw Continuous Rim
- Continuous rim blades have softer bonds for cutting hard materials such as tile, porcelain, granite, stone, glass, and other materials that can chip easily.
- These blades don’t have individual segments but instead have a solid, continuous rim or edge.
- Most continuous rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
- Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
- The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
- Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
- If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
- If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
- Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
- The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
- The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page