Workshop Presses & Accessories

This “Borum Industrial” 100,000kg Air Hydraulic Workshop Press is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding work requires high pressure hydraulics. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings.

“Borum Industrial” Air Hydraulic Workshop Presses are available in a variety of capacities and sizes. The press frames are designed for maximum strength, reliability and durability. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, “Borum Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!

Features

• Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
• Foot operated air trigger ram travel control
• 100mm pressure gauge
• Table winch system lowers or raises the bed
• High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
• Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
• Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
• Integrated overload protection valve keeps from overloading the system
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy clean up
• Extra tall working range for versatility
• Pair of bed plates included

Specifications

• Safe Working Capacity: 100,000kg
• Working Range: 113-813mm
• Overall Height: 1848mm
• Overall Width: 1250mm
• Overall Depth: 990mm
• Bed Width: 787mm
• Bed Surface Depth: 342mm
• Piston Ram Stroke: 300mm
• Ram Diameter: 140mm
• Width Between Side Posts: 268mm
• Bed Height Settings: 6
• Operating Air Pressure: 110-125psi
• Air Inlet: 1/4″NPT
• Nett Weight: 652kg
• Crate: 2044 x 1150 x 524mm
• Gross Weight: 762kg

Intended Use

Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.

This TQ Pro “Latest Technologies” 30,000kg Air Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 30,000kg Air Hydraulic Workshop Press features a fast-pump core that allows the pressure head assembly to lower and make contact with the work piece more quickly than the slow-pump core. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.

Includes a set of mandrill pressing attachments.

 Features:

• Premium-grade steel built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy clean up
• High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
• Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
• Foot Operated air trigger ram travel control
• Bed winch with swivel handle
• Integrated overload protection valve keeps from overloading the system
• Extra-long handle included for easy pumping force
• Foot pedal for pneumatic operation
• Handy removable parts tray
• Includes a set of mandrill pressing attachments

Specifications:

• Safe Working Capacity: 30,000kg
• Working Range: 25-850mm
• Overall Height: 1800mm
• Overall Width: 770mm
• Overall Depth: 505mm
• Bed Outside: 164mm
• Bed Inside: 148mm
• Bed Width: 600mm
• Clear Pressing Space: 167 x 280mm
• Ram Sideways Movement: 200mm
• Piston Ram Stroke: 145mm
• Screw Adjustment: 75mm
• Ram Diameter: 55mm
• Bed Height Settings: 6
• Nett Weight: 163kg
• Crate: 1750 x 840 x 320mm
• Gross Weight: 178kg

Intended Use

For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.

This “TradeQuip “Made for the Trade” 45,000kg Air Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear. A polished and chromed cylinder ram and piston is guided by top quality performance seals, wear rings and dust seals. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed. Featuring an integrated overload protection valve, the hydraulic system features an onboard extra long handle for easy manual pumping force when not in pneumatic mode. For maximum safety and ease of use this air hydraulic system has been equipped with a foot operated air trigger for ultimate versatility. This TradeQuip “Made for the Trade” Workshop Press also becomes more efficient the most with it’s smooth and safe hand winch for fast and easy press bed height adjustment and the double spring ram return for fast ram retraction. Designed with a superior quality oil filled dial gauge for accurate dual metric/tons pressure readings.  (Previous models include product code/s; TQHP50A)

“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!

Features:

• Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
• Foot operated air trigger ram travel control
• 100mm pressure gauge
• Polished pneumatic aluminium air motor with polyurethane double seal setup
• Bed winch for easy raise and lower adjustment
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
• Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
• Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
• Includes hand winch for fast and easy press bed height adjustments
• Integrated overload protection valve keeps from overloading the system
• Double spring ram return for fast ram retraction

Specifications:

• Safe Working Capacity: 45,000kg
• Working Range: 159-859mm
• Overall Height: 1707mm
• Overall Width: 1420mm
• Overall Depth: 800mm
• Width Between Side Posts: 186mm
• Bed Surface Depth: 359mm
• Bed Inside: 195mm
• Bed Width: 826mm
• Piston Ram Stroke: 190mm
• Ram Diameter: 90mm
• Bed Height Settings: 6
• Operating Air Pressure: 110-125 psi
• Nett Weight: 301kg
• Carton: 1900 x 1040 x 500mm
• Gross Weight: 340kg

Intended Use

Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.

This “TradeQuip “Made for the Trade” 50,000kg Air/Manual Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle.  With it’s very wide 713mm bed width and 210mm inside bed gap this press becomes one of the most diverse Workshop Presses in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.

Features:

• Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
• Hand operated air trigger ram travel control
• 100mm pressure gauge
• Polished pneumatic aluminium air motor
• Bed winch for easy raise and lower adjustment
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy cleanup
• High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
• Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
• Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
• Integrated overload protection valve keeps from overloading the system
• Double spring ram return for fast ram retraction

Specifications:

• Safe Working Capacity: 50,000kg
• Working Range: 137-837mm
• Overall Height: 1700mm
• Overall Width: 1290mm
• Overall Depth: 745mm
• Bed Outside: 356mm
• Bed Inside: 210mm
• Bed Width: 713mm
• Piston Ram Stroke: 190mm
• Ram Diameter: 95mm
• Bed Height Settings: 6
• Operating Air Pressure: 110-125 psi
• Nett Weight: 271kg
• Carton: 1900 x 945 x 490mm
• Gross Weight: 305kg

Intended Use

Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.

Dominate the most demanding workshop tasks with this eQuipt “Designed to Deliver” industrial-grade powerhouse of a press, designed to deliver massive pressing force with smooth, effortless precision. Featuring a versatile dual manual and air-powered hydraulic system, it offers the ultimate flexibility to switch between rapid positioning and controlled, high-capacity pressure. Built for durability and ease of use, the integrated bed winch and rugged, dirt-resistant finish ensure your shop stays productive and professional even under the heaviest workloads.

 Features:

• Hydraulics are powered with a high quality oil
• 100mm pressure gauge
• Integrated overload protection valve keeps from overloading the system
• Lead-free paint finish is oil, grease and dirt-resistant for easy cleanup and to help prevent rust
• Bed winch for fast adjustment

Specifications:

• Safe working capacity: 45,000kg
• Working range: 144-984mm
• Operating Air Pressure: 110-125 psi
  
• Overall Dimensions (including Winch & Pump): 1320(L) x 745(D) x 1744(H) mm
• Bed Dimensions: 710(L) x 320(D) mm
• Working Bed Gap: 520mm x 162mm
• Press Spigot Diameter: 53mm 
  
• Weight: 245kg

Intended Use

For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.

This TQ Pro “Latest Technologies” 30,000kg Electric Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” electric hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 30,000kg Electric Hydraulic Workshop Press features a dual stage pump where the first stage pump quickly extends the ram to the load point & then the second stage engages and provides higher pressure to perform pressing operations. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.

Includes a set of mandrill pressing attachments mounted onto the frame as well as a polycarbonate safety guard providing added security for the user.

 Features:

• Premium-grade steel built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy clean up
• High quality large diameter steel hydraulic cylinder unit results in lower oil pressure needed to develop pressing force, helping to reduce wear and extend service life of the ram and pump
• Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
• Foot Operated electric trigger for extending & retracting the main ram
• Key operated power switch ensures user safety by providing full lock out of the pump functions while not in service
• Easy to access raise & lower buttons on press frame with large emergency stop button
• Flexible LED inspection light illuminates the working area
• Integrated bed winch with swivel handle
• 2-way lockable V-Blocks ensure they remain secured on the press
• Integrated overload protection valve keeps from overloading the system
• Handy removable parts tray
• Includes a set of mandrill pressing attachments
• Polycarbonate safety guard included

Specifications:

• Safe Working Capacity: 30,000kg
• Working Range: 25-850mm
• Overall Height: 1800mm
• Overall Width: 1080mm
• Overall Depth: 505mm
• Ram Diameter: 60mm
• Frame Inside: 148mm
• Frame Thickness: 8mm
• Bed Thickness: 10mm
• Bed Inside: 165mm
• Bed Width: 600mm
• Ram Sideways Movement: 200mm
• Piston Ram Stroke: 145mm
• Screw Adjustment: 75mm
• Bed Height Settings: 6
• Lower Parts Tray: 225)L) x 135(W) x 55(D)mm
• Included Press Pins & Mount: 2T, 3T, 6T, 8T, 10T, 12T, 13T, 15T
• Power Unit: 240V, 10A Plug
• Minimum Height Clearance Required With Bed At Max Height & Safety Guard Opened Fully: 2230mm
• Nett Weight: 174kg
• Crate: 1690 x 910 x 340mm
• Gross Weight: 205kg

Included Safety Guard Specifications:

• Overall Dimensions Installed: 480L x 620H x 150Dmm
• Working Area (Guard Screen Raised): 400W x 535Hmm
• Protection Area (Guard Screen Lowered): 540W x 540Hmm
• Polycarbonate Guard Screen Thickness: 3mm

Foot Pedal Module Specifications:

• Overall Dimensions: 170 x 130 x 160mm
• Clearance Between Foot Pedals & Pedal Guard: 125mm

This TQ Pro “Latest Technologies” 50,000kg Electric Hydraulic Workshop Press is capable of bending, pressing or extruding and makes light work of installing ball joints, U-joints and pulleys – making it ideal for many automotive and industrial applications. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, TQ Pro “Latest Technologies” electric hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility! This 50,000kg Electric Hydraulic Workshop Press features a dual stage pump where the first stage pump quickly extends the ram to the load point & then the second stage engages and provides higher pressure to perform pressing operations. The ram cylinder glides across the width of the upper frame allowing off-centre pressing.

Includes a set of mandrill pressing attachments mounted onto the frame as well as a polycarbonate safety guard providing added security for the user..

 Features:

• Premium-grade steel built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint is oil, grease and dirt-resistant for easy clean up
• High quality large diameter steel hydraulic cylinder unit results in lower oil pressure needed to develop pressing force, helping to reduce wear and extend service life of the ram and pump
• Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility
• Foot Operated electric trigger for extending & retracting the main ram
• Key operated power switch ensures user safety by providing full lock out of the pump functions while not in service
• Easy to access raise & lower buttons on press frame with large emergency stop button
• Flexible LED inspection light illuminates the working area
• Integrated bed winch with swivel handle
• 2-way lockable V-Blocks ensure they remain secured on the press
• Integrated overload protection valve keeps from overloading the system
• Handy removable parts tray
• Includes a set of mandrill pressing attachments
• Polycarbonate safety guard included

Specifications:

• Safe Working Capacity: 50,000kg
• Working Range: 80-780mm
• Overall Height: 1900mm
• Overall Width: 1240mm
• Overall Depth: 540mm
• Ram Diameter: 70mm
• Frame Inside: 200mm
• Frame Thickness: 10mm
• Bed Thickness: 12mm
• Bed Inside: 220mm
• Bed Width: 750mm
• Bed Gap (Workable Pressing Area): 480 x 220mm
• Ram Sideways Movement: 280mm
• Piston Ram Stroke: 145mm
• Screw Adjustment: 75mm
• Bed Height Settings: 6
• Lower Parts Tray: 225)L) x 135(W) x 55(D)mm
• Included Press Pins & Mount: 2T, 3T, 6T, 8T, 10T, 12T, 13T, 15T
• Power Unit: 240V, 10A Plug
• Minimum Height Clearance Required With Bed At Max Height & Safety Guard Opened Fully: 2220mm
• Nett Weight: 255kg
• Crate: 1860 x 1000 x 410mm
• Gross Weight: 290kg

Included Safety Guard Specifications:

• Overall Dimensions Installed: 620 x 620 x 150mm
• Working Area (Guard Screen Raised): 540 x 435mm
• Protection Area (Guard Screen Lowered): 540 x 540mm
• Polycarbonate Guard Screen Thickness: 3mm

Foot Pedal Module Specifications:

• Overall Dimensions: 170 x 130 x 160mm
• Clearance Between Foot Pedals & Pedal Guard: 125mm

Specifications

• Hub Screw Length: 207mm
• Hub Screw Drive: 32; 38mm
• Sleeve External: 76.5 x 65; 86 x 77; 91 x 81.5; 102 x 92mm
• Drift Sizes: 50; 55; 59; 63; 66.5; 70; 71.5; 73; 73.5; 75, 77.5; 81.4; 83.3; 86; 88.4; 102mm

Intended Use

This FWD WHEEL BEARING KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery

The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.

(Previous models include product code/s; 1069T)

Features:

• Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint finish is oil, grease and dirt-resistant for easy cleanup
• High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
• Piston-ram is treated and polished for extended life
• Reinforced head bolster for added strength
• Pair of bed plates included

Specifications:

• Safe Working Capacity: 20,000kg
• Working Range: 43 – 882mm
• Overall Height: 1795mm
• Overall Width: 780mm
• Overall Depth: 690mm
• Bed Width: 505mm
• Bed Gap: 105mm
• Bed Inside Working Area: 358 x 105mm
• Press Head Cap Diameter: 45mm
• Press Head Cap Length: 17mm
• Piston Ram Stroke: 185mm
• Ram Lateral Adjustment: 180mm
• Nett Weight: 90kg
• Crate: 1550 x 280 x 240mm
• Gross Weight: 110kg

Intended Use:

Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.

The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.

(Previous models include product code/s; 1070T)

Features:

• Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint finish is oil, grease and dirt-resistant for easy cleanup
• High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
• Piston-ram is treated and polished for extended life
• Reinforced head bolster for added strength
• Pair of bed plates included

Specifications:

• Safe Working Capacity: 30,000kg
• Working Range: 50 – 1030mm
• Overall Height: 1950mm
• Overall Width: 830mm
• Overall Depth: 660mm
• Bed Width: 455mm
• Bed Gap: 154mm
• Bed Inside Working Area: 230 x 154mm
• Bed Cage Bolt Holes: 422 x 80mm
• Press Head Diameter: 56mm
• Load Cap Length: 17mm
• Jacking Handle Length: 639mm
• Ram Lateral Adjustment: 70mm
• Piston Ram Stroke: 170mm
• Nett Weight: 138kg
• Crate: 1700 x 510 x 300mm
• Gross Weight: 168kg

Intended Use:

Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.

Specifications

• 4 x Step Plates: 74, 76, 78, 80mm
• 4 x Pulling Spindles With Thrust Bearings (10mm, 12mm, 14mm & 16mm)
• 20 x Press Sleeves: 44 x 43; 46 x 36; 48 x 38; 50 x 40; 52 x 42; 54 x 44; 56 x 46; 58 x 48; 60 x 50; 62 x 52; 64 x 54; 66 x 56; 68 x 58; 70 x 60; 72 x 62; 74 x 64; 76 x 66; 78 x 68; 80 x 70; 82 x 72mm

Intended Use

This Master PRESS & PULL KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery

Specifications

• 4 Beams
• 3 ½” Sleeves
• 20 Sleeves
• 11pieces (GOLD) – OD44xID34; OD46xID36; OD54xID44; OD56xID46; OD58xID48; OD66xID56; OD68xID46; OD58xID48; OD66xID56; OD68xID58; OD70xID460; OD78xID68; OD80xID70; OD82xID72
• 9pieces (SILVER) – OD48xID38; OD40xID30; OD52xID42; OD60xID50; OD62xID52; OD72xID62; OD74xID64; OD76xID66

Intended Use

This PRESS & PULL SLEEVE KIT intended us is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery

The Workshop Mate “Workstation” 30,000kg heavy duty H-frame workshop press delivers up to 30 tons of pressing force. When components need to be removed or assembled, this press delivers the controlled power to get the job done in a much quicker, safer and more efficient way than a standard shop press. Remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with this versatile hydraulic press! The side mounted Spring Compressor adds extra versatility & efficiency to any fast-paced workshop environment and will work on most (NOT ALL) manufacturers springs up to 3,500kg GVM. The 10,000 psi Air/Hydraulic foot pump on this workshop press operates the ram at a slow or fast speed to accommodate a wide variety of pressing applications. This 30,000kg hydraulic workshop press & spring compressor features a multitude of included accessories which make this product truly unique & a valuable tool as it can perform a varied amount of work from one single workstation.   (Previous models include product code/s; WSM3)

Features:

• Air/Hydraulic operated 30,000kg press
• Side mounted spring compressor
• Filter crushing assembly
• Dozens of unique tooling options
• On-board tooling storage stand
• Winch operation to lower and raise bench

Benefits: 

• Press almost any bearing or bush with PRECISION and ACCURACY in minutes, saving valuable workshop time
• Smooth AIR/HYDRAULIC foot pedal operation for hands-free accuracy & control
• Hands free spring compression
• Even the most difficult pressing tasks become SAFE & EASY
• Complete with COMPREHENSIVE HIGH QUALITY interlocking Tool, Die and Spacer Kit to ensure SAFE WORK PRACTICES
• Complete on machine storage – minimises time spent searching for the required tools & spacers for each job!
• Tasks like SUSPENSION BUSHES once seen as too hard become a breeze
• A comprehensive variety of spring adaptors, suitable to almost any type of model of spring SAFE & EASY to compress in MINUTES
• Decrease labour time & increase productivity and efficiencies
• Increase Workplace Safety
• Undertake jobs that are currently too difficult

Note: ADDITIONAL TOOLING MAY BE REQUIRED FOR SOME APPLICATIONS

Specifications: 

• Safe Working Capacity: 30,000kg
• Working Range: 224-819mm
• Piston Ram Stroke Main Ram: 140mm (Standard load cap fitted)
• Bed Height Settings: 85mm increments – 8 settings
• Bed Width: 466mm
• Bed Gap: 200mm
• Piston Ram Stroke: 295mm
• Main Ram Diameter: 70mm
• Input Pressure: 700 bar
• Operating Air Pressure: 90-125psi
• Recommended Hydraulic Oil For Maintenance: ISO32
• Overall Dimensions: 1820H x 1170W x 820Dmm
• Skid: 1020L x 1000W x 1600Hmm
• Weight: 400kg

Spring Compressor:

• Will do most (NOT ALL) manufacturer springs up to 3,500kg GVM

Intended Use

Designed for easy pressing of front struts, rear axles, 4×4 struts, bushes and ball joints, hubs, wheel bearings & suspension work.

Elevate your workshop’s productivity with this heavy-duty eQuipt “Designed to Deliver” manual press, engineered to deliver uncompromising power and precision for all your pressing, bending, and straightening needs. The dependable double-spring return system ensures rapid ram retraction, allowing you to move through high-pressure jobs with speed and total control. Designed for the professional environment, its rugged, dirt-resistant finish and included bed plates make it a versatile, long-lasting staple for any serious automotive or industrial bay.

 Features:

• Paint finish is oil, grease and dirt resistant for easy cleanup
• Dependable double spring return for fast ram retraction
• Pair of bed plates included

Specifications:

• Safe working capacity: 20,000kg
• Working range: 45-721mm
• Piston ram stroke: 161mm
• Bed Width: 662mm
• Overall Dimensions: 700(L) x 660(D) x 1507(H) mm
• Bed Dimensions: 514(L) x 211(D) mm
• Working Bed Gap: 365mm x 105mm
• Press Spigot Diameter: 30mm
• Weight: 81kg

Intended Use

For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.

The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.

(Previous models include product code/s; 1060T)

Features:

• Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint finish is oil, grease and dirt-resistant for easy cleanup
• High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
• Dependable double spring return for fast ram retraction
• Piston-ram is treated and polished for extended life
• Reinforced head bolster for added strength
• Pair of bed plates included

Specifications:

• Safe Working Capacity: 20,000kg
• Working Range: 60 – 773mm
• Overall Height: 1503mm
• Overall Width: 705mm
• Overall Depth: 660mm
• Bed Width: 504mm
• Bed Gap: 103mm
• Bed Inside Working Area: 285 x 103mm
• Bed Cage Bolt Holes: 453 x 61mm
• Press Head Diameter: 40mm
• Press Head Length: 68mm
• Jacking Handle Length: 694mm
• Piston Ram Stroke: 160mm
• Nett Weight: 82kg
• Crate: 1620 x 240 x 300mm
• Gross Weight: 90kg

Intended Use:

Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.

The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.

(Previous models include product code/s; 1069T)

Features:

• Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
• Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
• Paint finish is oil, grease and dirt-resistant for easy cleanup
• High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
• Dependable double spring return for fast ram retraction
• Piston-ram is treated and polished for extended life
• Reinforced head bolster for added strength
• Pair of dual lock-in plates included

Specifications:

• Safe Working Capacity: 30,000kg
• Working Range: 45 – 705mm
• Overall Height: 1605mm
• Overall Width: 745mm
• Overall Depth: 660mm
• Internal Frame Gap: 103mm
• Bed Width: 480mm
• Bed Gap: 124mm
• Bed Inside Working Area: 254 x 124mm
• Bed Cage Bolt Holes: 453 x 61mm
• Press Head Diameter: 50mm
• Press Head Length: 68mm
• Jacking Handle Length: 694mm
• Piston Ram Stroke: 163mm
• Nett Weight: 113kg
• Crate: 1850 x 360 x 320mm
• Gross Weight: 130kg

Intended Use:

Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.