TQB BRANDS Workshop Mate 18 Piece Sleeve Set
The Workshop Mate “Workstation” is a truly unique piece of equipment for when components need to be removed or assembled & the WSMP50 is the perfect optional extra accessory for your Workshop Mate. This 18 Piece Sleeve Kit is constructed from heat-treated forged carbon steel for longevity in a busy work environment.
Features:
- Sturdy metal carry case
- 18 sleeves constructed from heat-treated forged carbon steel
- Designed and engineered to work as an added accessory to all current Workshop Mate Workstations
Note: ADDITIONAL TOOLING MAY BE REQUIRED FOR SOME APPLICATIONS
Specifications:
- 18 Piece Sleeve Set includes: 28x20x80mm; 33x25x80mm; 38x30x80mm; 43x35x80mm; 48x40x80mm; 53x45x80mm; 58x50x80mm; 63x55x80mm; 68x60x80mm; 73x65x80mm; 78x70x80mm; 83x75x80mm; 88x80x80mm; 93x85x80mm; 98x90x80mm; 103x95x80mm; 108x100x80mm; 113x105x80mm
- Carton Dims: 240 x 240 x 110mm
- GW: 11kg
Intended Use
Designed for easy pressing of front struts, rear axles, 4×4 struts, bushes and ball joints, hubs, wheel bearings & suspension work.
Related products
-
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 50,000kg
This “TradeQuip “Made for the Trade” 50,000kg Air/Manual Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 713mm bed width and 210mm inside bed gap this press becomes one of the most diverse Workshop Presses in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
Features:
- Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
- Hand operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Double spring ram return for fast ram retraction
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 137-837mm
- Overall Height: 1700mm
- Overall Width: 1290mm
- Overall Depth: 745mm
- Bed Outside: 356mm
- Bed Inside: 210mm
- Bed Width: 713mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 95mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125 psi
- Nett Weight: 271kg
- Carton: 1900 x 945 x 490mm
- Gross Weight: 305kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Workshop Press 20,000kg
The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.
(Previous models include product code/s; 1069T)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished for extended life
- Reinforced head bolster for added strength
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 20,000kg
- Working Range: 43 – 882mm
- Overall Height: 1795mm
- Overall Width: 780mm
- Overall Depth: 690mm
- Bed Width: 505mm
- Bed Gap: 105mm
- Bed Inside Working Area: 358 x 105mm
- Press Head Cap Diameter: 45mm
- Press Head Cap Length: 17mm
- Piston Ram Stroke: 185mm
- Ram Lateral Adjustment: 180mm
- Nett Weight: 90kg
- Crate: 1550 x 280 x 240mm
- Gross Weight: 110kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS FWD Wheel Bearing Kit
This versatile TradeQuip Universal FWD Wheel Bearing Kit includes everything you need to remove and install bushes, bearings and seals. Constructed from heat-treated forged high carbon steel, this durable set is perfect for the removal and installation for Bearing bushes ,Silent bearing, Hydraulic bearing and Rubber bearing. This units comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast. The professional “Made for the Trade” 23pce FWD Wheel Bearing Kit has applications across several industries.
Features- 23 Piece Set Constructed from heat-treated forged carbon steel
- Sturdy Blow Mould Case
Specifications
- Hub Screw Length: 207mm
- Hub Screw Drive: 32; 38mm
- Sleeve External: 76.5 x 65; 86 x 77; 91 x 81.5; 102 x 92mm
- Drift Sizes: 50; 55; 59; 63; 66.5; 70; 71.5; 73; 73.5; 75, 77.5; 81.4; 83.3; 86; 88.4; 102mm
Intended Use
This FWD WHEEL BEARING KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Workshop Press 30,000kg
The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.
(Previous models include product code/s; 1070T)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished for extended life
- Reinforced head bolster for added strength
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 50 – 1030mm
- Overall Height: 1950mm
- Overall Width: 830mm
- Overall Depth: 660mm
- Bed Width: 455mm
- Bed Gap: 154mm
- Bed Inside Working Area: 230 x 154mm
- Bed Cage Bolt Holes: 422 x 80mm
- Press Head Diameter: 56mm
- Load Cap Length: 17mm
- Jacking Handle Length: 639mm
- Ram Lateral Adjustment: 70mm
- Piston Ram Stroke: 170mm
- Nett Weight: 138kg
- Crate: 1700 x 510 x 300mm
- Gross Weight: 168kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews)