TQB BRANDS Universal Press Support Block 30,000kg
- Made from Billet aluminium
- Spacer Block made from light-weight aluminium
Specifications
- Rated to a maximum use of 30,000kg
- Overall Size
- Base Block: 250 x 200 x 40mm
- Height Adaptor Block: 200 x 70 x 40mm
Intended Use
The Press Support Block is for use with a hydraulic shop press for workpieces with a complicated shape to allow bearings to be pressed in or out accurately. Always use PPE.
Related products
-
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 45,000kg
This “TradeQuip “Made for the Trade” 45,000kg Air Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear. A polished and chromed cylinder ram and piston is guided by top quality performance seals, wear rings and dust seals. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed. Featuring an integrated overload protection valve, the hydraulic system features an onboard extra long handle for easy manual pumping force when not in pneumatic mode. For maximum safety and ease of use this air hydraulic system has been equipped with a foot operated air trigger for ultimate versatility. This TradeQuip “Made for the Trade” Workshop Press also becomes more efficient the most with it’s smooth and safe hand winch for fast and easy press bed height adjustment and the double spring ram return for fast ram retraction. Designed with a superior quality oil filled dial gauge for accurate dual metric/tons pressure readings. (Previous models include product code/s; TQHP50A)
“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features:
- Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
- Foot operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor with polyurethane double seal setup
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Includes hand winch for fast and easy press bed height adjustments
- Integrated overload protection valve keeps from overloading the system
- Double spring ram return for fast ram retraction
Specifications:
- Safe Working Capacity: 45,000kg
- Working Range: 159-859mm
- Overall Height: 1707mm
- Overall Width: 1420mm
- Overall Depth: 800mm
- Width Between Side Posts: 186mm
- Bed Surface Depth: 359mm
- Bed Inside: 195mm
- Bed Width: 826mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 90mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125 psi
- Nett Weight: 301kg
- Carton: 1900 x 1040 x 500mm
- Gross Weight: 340kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 100,000kg
This “Borum Industrial” 100,000kg Air Hydraulic Workshop Press is designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding work requires high pressure hydraulics. Polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. Includes a dial gauge for dual metric/tons pressure readings.
“Borum Industrial” Air Hydraulic Workshop Presses are available in a variety of capacities and sizes. The press frames are designed for maximum strength, reliability and durability. The strong frames and powerful high-pressure hydraulics will provide years of dependable service in many applications. When components need to be removed or assembled, “Borum Industrial” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Foot operated air trigger ram travel control
- 100mm pressure gauge
- Table winch system lowers or raises the bed
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy clean up
- Extra tall working range for versatility
- Pair of bed plates included
Specifications
- Safe Working Capacity: 100,000kg
- Working Range: 113-813mm
- Overall Height: 1848mm
- Overall Width: 1250mm
- Overall Depth: 990mm
- Bed Width: 787mm
- Bed Surface Depth: 342mm
- Piston Ram Stroke: 300mm
- Ram Diameter: 140mm
- Width Between Side Posts: 268mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125psi
- Air Inlet: 1/4″NPT
- Nett Weight: 652kg
- Crate: 2044 x 1150 x 524mm
- Gross Weight: 762kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Press 45,000kg
This “TradeQuip “Made for the Trade” 45,000kg Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features:
- Heavy-duty high-grade steel frame
- 100mm pressure gauge
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish to help prevent rust
- Paint is oil, grease and dirt-resistant
- Hand winch for fast height adjustment
Specifications:
- Safe Working Capacity: 45,000kg
- Working Range: 159-859mm
- Overall Height: 1707mm
- Overall Width: 1420mm
- Overall Depth: 826mm
- Width Between Side Posts: 186mm
- Bed Surface Depth: 359mm
- Bed Inside: 195mm
- Bed Width: 826mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 90mm
- Bed Height Settings: 6
- Nett Weight: 296kg
- Carton: 1040 x 390 x 1900mm
- Gross Weight: 335kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Workshop Press 30,000kg
The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.
(Previous models include product code/s; 1070T)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished for extended life
- Reinforced head bolster for added strength
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 30,000kg
- Working Range: 50 – 1030mm
- Overall Height: 1950mm
- Overall Width: 830mm
- Overall Depth: 660mm
- Bed Width: 455mm
- Bed Gap: 154mm
- Bed Inside Working Area: 230 x 154mm
- Bed Cage Bolt Holes: 422 x 80mm
- Press Head Diameter: 56mm
- Load Cap Length: 17mm
- Jacking Handle Length: 639mm
- Ram Lateral Adjustment: 70mm
- Piston Ram Stroke: 170mm
- Nett Weight: 138kg
- Crate: 1700 x 510 x 300mm
- Gross Weight: 168kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews)