Electrical Testers
Showing all 25 results
-
Electrical TestersFLUKE 1AC II Non-Contact Voltage Tester
- Be aware of voltage easily – the tip glows red and a beeper sounds when voltage is detected
- Continuous self-test so you always know it’s working
- Voltage detection range for wide application use – 90 V to 1000 V AC or 200 V to 1000 V AC
- Audible/Silent mode for added convenience
(0 reviews) -
Electrical TestersFLUKE 2042 Cable Locator
- For all applications (live or dead cables) without additional instruments
- Set includes a transmitter and a receiver
- Proven digitally coded sender signal guarantees clear signal identification
- Transmitter with LC-display for transmitting level, transmitting code and external voltage
- Receiver with a backlight LC-display for level of receiving signal, code of receiving signal and live voltage indication
- Automatic or manual adjustment of receiving signal sensitivity
- Acoustical receiving signal switchable
- Auto-Power-Off
- Additional torch lamp function for working in dark environments
- Additional transmitters are available for extension of to distinguish between several signals
(0 reviews) -
Electrical TestersFLUKE 9040 Phase Rotation Indicator
- 3 phase indication
- Indication of phase rotation
- Clear LCD display
- No battery required
(0 reviews) -
Electrical TestersFLUKE 9062 Motor and Phase Rotation Indicator
- 3 phase indication
- Indication of phase rotation
- Indication of motor rotation direction
- Contact free determination of the rotation direction of running motors
(0 reviews) -
Electrical TestersFLUKE LVD2 Non-Contact Voltage Tester
- Non-contact AC voltage tester and LED flashlight
- Detects from 90 to 600 V AC
- Features dual-sensitivity for two levels of detection
- Indicates proximity to AC voltage source with blue light
- Indicates you’re at the source with red light
- Ultra-bright white LED light with 100,000-hour bulb life
- Safety rated to CAT IV 600 V
- Operating temperature 0°C to 50°C
- AAA battery included
(0 reviews) -
Electrical TestersFLUKE PRV240 Proving Unit
- Validate test tool functionality outside of hazardous zones
- Supplies 240 V, both DC and AC
- Compatible with both high or low impedance test tools
(0 reviews) -
Electrical TestersFLUKE PRV240FS Proving Unit
- Prove operation of FieldSense function on T6 electrical testers
- Reduce risk of shock and arc flash by validating tool operation
- Source both AC and DC steady-state voltage (240 V AC/DC)
(0 reviews) -
Electrical TestersFLUKE ST240+ RCD Socket Tester with Beeper
- Simple operation – Plug into socket; with the bright, easy-to-see LEDs, verify correct wiring or identify common wiring problems in both standard and RCD outlets
- Know more, faster –with the handy chart, quickly identify one of six wiring conditions for the outlet
- RCD outlets–with an integrated RCD test, you can feel secure knowing that your RCD equipped outlets are functioning properly
(0 reviews) -
Electrical TestersFLUKE T5-1000 Voltage, Continuity and Current Tester
- OpenJaw™ design: measure current without breaking the circuit
- Tester automatically selects AC or DC voltage, up to 1000 V
- Work in tight spaces with detachable Slim Reach probe tips
(0 reviews) -
Electrical TestersFLUKE T5-600 Electrical Tester
- Measure current up to 100 A without breaking the circuit
- Meter automatically selects AC or DC voltage, up to 600 V
- Resistance measurements up to 1000 Ω plus continuity test
- Work in tight spaces with detachable SlimReach™ probe tips
(0 reviews) -
Electrical TestersFLUKE T6-1000 Electrical Tester
- Measure voltage to 1000 V AC without test leads
- Simultaneously measure voltage and current
- 17.8 mm open fork is widest in the industry
- Measure up to 200 A on 4/0 wires (120 mm2)
(0 reviews) -
Electrical TestersFLUKE T6-1000 PRO Electrical Tester
- Save time by seeing voltage and current measurements at the same time
- Visual Continuity™ – the screen automatically turns green for continuity, perfect when it’s too loud to hear the beeper
- FieldSense™ technology for AC voltage, current and frequency, all without making electrical contact to live voltage
(0 reviews) -
Electrical TestersFLUKE T6-600 Electrical Tester
- Measure AC voltage and current without touching a live wire
- Troubleshoot with all power supply measurements at-a-glance
- See AC voltage and current values without test leads
(0 reviews) -
Electrical TestersFLUKE Two-Pole Voltage and Continuity Testers
Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.
- Designed according to IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries.
- CAT IV 600 V, CAT III 690 V safety rating
- With 4 ways to indicate the presence of voltage – LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present (digital display on T130, T150, vibration indicator on T110, T130, T150)
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – 6 to 24v
FEATURES
- Check 6-24 Volt systems
- Light for testing low voltage DC electrical circuits
- Check series parallel switches and solenoids
- Heavy duty contact crocodile clip and bulb
- High impact transparent handle
- Steel probe
- Extra long lead – 1200mm (1.2m)
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Car & Truck – 3 to 48v
FEATURES
- Circuit tester with test lead for either passenger car or trucks
- Checks circuit between 3-48 Volt
- LED display shows polarity
- Safe to use with electronics
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Computer-Safe – 3 to 15v
FEATURES
- Safely tests standard primary automotive circuits and on-board computer controlled electrical systems without damaging the micro-processor
- Operates from 3-15 Volts
- Includes probe adaptor for testing female connectors
- Supplied with 1200mm (1.2m) ground wire
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Cordless – 3 to 30v
FEATURES
- Suitable for testing DC circuits with a voltage between 3 and 30 Volts
- No ground or clip necessary – simply touch some thing that acts as a ground (bare metal part on a car) and use the probe to test for power.
- Bi-directional polarity testing: Power and Ground
- Dual colour LED indicates: Red for power, green for ground on 6V, 12V and 24V systems
- Compact size for ease of use in confined areas
- Computer safe
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Hybrid Vehicle – 12 to 42v
FEATURES
- Compatible with current 12V system plus newer 42V system
- Safe for low current circuits since tester only draws 3 milliamps at 12V
- Automatic voltage identification with blue for 12V and red 42V systems
- Two super-bright LED’s for visibility under all conditions
- Crystal-clear handle provides 360 visibility, even in bright light
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Long Probe – 6 to 24v
FEATURES
- Tests 6-24 Volt electric circuits
- Heavy duty design and construction
- Sharp, extra long, insulated probe for access to hard to reach circuits
- Handle lights up if the circuit is good
- New coil cord design for ease of use
- Spring relief cord stretches to 3.6m
- Leads remain flexible in low temperatures
- Heavy duty insulated alligator clip
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Short Probe – 6 to 24v
FEATURES
- Tests 6, 12 & 24 Volt electric circuits
- Sharp, short length probe
- Handle lights up if the circuit is good
- Long 1200mm lead (1.2m)
- Heavy duty insulated alligator clip
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Volts, Ohms & Continuity – Auto Ranging – 0.8 To 100 Volts DC
FEATURES
- Auto ranging DC Volt Meter
- Auto ranging Ohms (resistance) Meter
- Audible (beep) continuity detection
- Digital LCD display with backlight provides a fast and accurate reading
- Auto power off
- Hold function
- CAT III 300V
SPECIFICATIONS
- DC voltage detection: 2V / 20V / 100V
- Resistance detection: 2000 Ω / 20K Ω / 200K Ω / 2M Ω / 20M Ω
- On-off detection: 2000 Ω / beep less than 50 Ω
(0 reviews) -
Current TestersSP TOOLS Digital Automotive Current Testers – 30A
FEATURES
- Tests circuit current up to 30Amps
- Design allows for easy connection into fuse Sockets
- Maintains fuse protection while connected
- Resolution .1A (100 milliamps), accuracy +2
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Electrical System TestersSP TOOLS Electrical System Tester – Multimeter, Power Probe & Oscilloscope
DESIGNED TO TEST THE ELECTRICAL SYSTEMS OF 12 & 24V AUTOMOTIVE VEHICLES
Fast and convenient, this generation of intelligent electrical system tester is equipped with a large LCD colour display screen it is designed to fault find all 12 and 24 volt vehicles. It allows you to activate electrical components, test their function, follow and locate bad earths or shorts. Measure DC voltage, Pulsed DC, Current, frequency and duty cycle, perform fuel injection tests and view the wave form display, check the continuity, diodes, confirm polarity, test and operate relays all in a self-protected test unit that is simple and easy to operate.
FEATURES
- Tests all 9V to 30V vehicle electrical systems
- Intelligent identification of voltage & resistance
- Interchangeable probe and 1m extension cord for difficult to reach areas
- Powered by 12 or 24V vehicle battery
- Oscilloscope function for single circuit testing
- Multimeter mode (measure voltage, resistance & diode)
- Dual top-mounted LED work lights
- Back lit 2.4” LCD display
- Multiple language settings
- Built-in speaker for warnings & alerts
SPECIFICATIONS
- Working voltage DC: Min 9V – Max 30V
- Working temperature: 0 – 60˚C (32 – 140˚F)
- Storage temperature: -40 – 70˚C (-40 – 158˚F)
- Power supply: 12V or 24V DC (Vehicle Battery)
- Max measuring voltage: 100 Volts
- Min measuring voltage: 0.1 of a Volt
- Resistance measuring Ω: 1.0 ohm ~ 200K ohm
- Current measuring range: 0 ~ 18 Amps
- Max continuous current: 18 Amps
- TFT true color LED display: 2.4”inches (320×240 DPI)
INCLUDES
- Electrical system tester
- 5m power cable & 1m probe extension cable
- Alligator clips
- Needle point test probe
- Automotive test probe (1mm diameter flattened tip)
- Auxiliary grounding clip
(0 reviews) -
Voltage TestersSP TOOLS Voltage Tester – Dualite Hi/Low
FEATURES
- Two tests in one
- Checks 6-12 volt system and spark plug test
- Voltage check on secondary or high voltage circuits
- White light low voltage
- Red light high voltage
- Extra long 1200mm lead (1.2m)
(0 reviews)