FLUKE 1AC II Non-Contact Voltage Tester
- Be aware of voltage easily – the tip glows red and a beeper sounds when voltage is detected
- Continuous self-test so you always know it’s working
- Voltage detection range for wide application use – 90 V to 1000 V AC or 200 V to 1000 V AC
- Audible/Silent mode for added convenience
Related products
-
Electrical System TestersSP TOOLS Electrical System Tester – Multimeter, Power Probe & Oscilloscope
DESIGNED TO TEST THE ELECTRICAL SYSTEMS OF 12 & 24V AUTOMOTIVE VEHICLES
Fast and convenient, this generation of intelligent electrical system tester is equipped with a large LCD colour display screen it is designed to fault find all 12 and 24 volt vehicles. It allows you to activate electrical components, test their function, follow and locate bad earths or shorts. Measure DC voltage, Pulsed DC, Current, frequency and duty cycle, perform fuel injection tests and view the wave form display, check the continuity, diodes, confirm polarity, test and operate relays all in a self-protected test unit that is simple and easy to operate.
FEATURES
- Tests all 9V to 30V vehicle electrical systems
- Intelligent identification of voltage & resistance
- Interchangeable probe and 1m extension cord for difficult to reach areas
- Powered by 12 or 24V vehicle battery
- Oscilloscope function for single circuit testing
- Multimeter mode (measure voltage, resistance & diode)
- Dual top-mounted LED work lights
- Back lit 2.4” LCD display
- Multiple language settings
- Built-in speaker for warnings & alerts
SPECIFICATIONS
- Working voltage DC: Min 9V – Max 30V
- Working temperature: 0 – 60˚C (32 – 140˚F)
- Storage temperature: -40 – 70˚C (-40 – 158˚F)
- Power supply: 12V or 24V DC (Vehicle Battery)
- Max measuring voltage: 100 Volts
- Min measuring voltage: 0.1 of a Volt
- Resistance measuring Ω: 1.0 ohm ~ 200K ohm
- Current measuring range: 0 ~ 18 Amps
- Max continuous current: 18 Amps
- TFT true color LED display: 2.4”inches (320×240 DPI)
INCLUDES
- Electrical system tester
- 5m power cable & 1m probe extension cable
- Alligator clips
- Needle point test probe
- Automotive test probe (1mm diameter flattened tip)
- Auxiliary grounding clip
(0 reviews) -
Electrical TestersFLUKE 2042 Cable Locator
- For all applications (live or dead cables) without additional instruments
- Set includes a transmitter and a receiver
- Proven digitally coded sender signal guarantees clear signal identification
- Transmitter with LC-display for transmitting level, transmitting code and external voltage
- Receiver with a backlight LC-display for level of receiving signal, code of receiving signal and live voltage indication
- Automatic or manual adjustment of receiving signal sensitivity
- Acoustical receiving signal switchable
- Auto-Power-Off
- Additional torch lamp function for working in dark environments
- Additional transmitters are available for extension of to distinguish between several signals
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Cordless – 3 to 30v
FEATURES
- Suitable for testing DC circuits with a voltage between 3 and 30 Volts
- No ground or clip necessary – simply touch some thing that acts as a ground (bare metal part on a car) and use the probe to test for power.
- Bi-directional polarity testing: Power and Ground
- Dual colour LED indicates: Red for power, green for ground on 6V, 12V and 24V systems
- Compact size for ease of use in confined areas
- Computer safe
(0 reviews) -
Circuit TestersSP TOOLS Circuit Tester – Long Probe – 6 to 24v
FEATURES
- Tests 6-24 Volt electric circuits
- Heavy duty design and construction
- Sharp, extra long, insulated probe for access to hard to reach circuits
- Handle lights up if the circuit is good
- New coil cord design for ease of use
- Spring relief cord stretches to 3.6m
- Leads remain flexible in low temperatures
- Heavy duty insulated alligator clip
(0 reviews)