Abrasives
Showing 109–144 of 155 results
-
BrushwareCHEMTOOLS Rapidstick™ Fibreglass Adhesive Remover Pen
Handy and versatile. Effortlessly removes dried-up adhesive.
Made from fine fibreglass threads. Customise the thread length for each application by twisting the end of the pen to increase/decrease thread exposure.
Perfect for cleaning, polishing, and burnishing applications.
Great for rust removal, contact cleaning, cleaning of pads, de-burring metal parts, and much more.
• Housing Size: 120mm long, 12mm diameter
• Thread Bundle: 4mm diameter
• Thread Length: Adjustable(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Fine Applicator Brush
Stainless steel handle. Goat hair bristles. Designed for all purpose use but suits fine cleaning and fluid application of adhesives, solvents, acids, and other liquid coatings.
• Handle Length: 89mm
• Full Length: 93mm
• Brush Size: 4mm (L) x 5mm x 2mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ General Utility Brush
Multiple rows of hog hair. Extra large brush base. Great for sweeping polished surfaces. Excellent clean-up brush for wet or dry surfaces.
• Full Length: 210mm
• Brush Size: 20mm (L) x 54mm x 21mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Reusable Acid Brush
Zinc plated steel handle. Horse hair bristles. Chiseled on a 30 degree angle at one end for better reach into tight corners. Designed for heavy duty scrubbing at either end.
• Handle Length: 114mm
• Full Length: 134mm
• Brush Size: 20mm (L) x 15mm x 13mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Scratch Brush
3 rows of stiff hog hair bristles. Great for the removal of sticky glues or crusty materials. Use wet or dry.
• Full Length: 195mm
• Brush Size: 12mm (L) x 36mm x 8mm(0 reviews) -
Brushware
CHEMTOOLS Rapidstick™ Soft Brass Brush
Heavy duty triple row cleaning brush. Secured high grade brass steel bristles. Removes chemical build-up and flux deposits. Ideal for cleaning hot soldering tips without damage.
• Full Length: 195mm
• Brush Size: 12mm (L) x 26mm x 8mm(0 reviews) -
BrushwareCHEMTOOLS Rapidstick™ Vertical Scrubbing Brush
Strong, wide, hardwood handle. Double row of hog hair bristles. Ideal for dusting and general clean-up. Use wet or dry.
• Handle Length: 126mm
• Full Length: 139mm
• Brush Size: 13mm (L) x 24mm x 10mm(0 reviews) -
Grinding WheelsDYMAXION Diamond Saw Blades Diamond Cup grinding wheels
- Diamond Cup Wheel Turbo.
- For light grinding, shaping and finishing in concrete, stone and general masonry.
- Improved cooling for increased cup life.
- 100, 115, 125 & 180mm diameters.
- Ideal for removing formwork seams and imperfections in concrete and stone.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grinding WheelsDYMAXION Grinding Disc Ferrous and Stainless Steels
- Suitable for grinding ferrous and stainless steels (inox).
- High grinding performance.
- High stock removal rates even at low pressure due to long tool life.
- Do not exceed maximum safe speed of 80m/s.
- Complies with DIN EN 12413 European standard and AS1788.1-1987 Australian standard.
- Grinding disc must be mounted correctly as per machine manufacturer’s specifications.
- Metal guards must be fitted and used on all machines.
- If grinding disc is chipped,cracked or damaged it must not be used, and needs to be replaced.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grinding MachinesITM Sanding Belts 915x50mm 3pk
Features
For use with PO362Specifications
Length : 915mm x 50mm
Belts per pack : 3(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grinding MachinesITM Sanding Belts 915x50mm 5pk
Features
For use with PO362Specifications
Length : 915mm x 50mm
Grits : 40, 80, 150, 240, 400
Belts per pack : 5(0 reviews) -
AccessoriesMILWAUKEE Carbide Abrasive Wheel
The Milwaukee® 49943005 is a 76mm x 1mm x 10mm (3” x .040″ x 3/8”) cut-off wheel. Intended to be a general-purpose wheel when paired with the Milwaukee M12 FUEL™ Cut-Off Tool (M12FCOT-0), this wheel is a unique solution that delivers the capability to cut a wide range of materials quickly and efficiently. Whether it’s drywall, cement backer board, PVC, plastics, etc., carbide abrasive wheels are suitable for the task when used with the M12 FUEL™ Cut-Off Tool (M12FCOT-0).
(0 reviews) -
Cup WheelsOX Pro Turbo Cup Wheel – 4-Inch
Built with the tradesman in mind, the OX Turbo Cup Wheel stands as a professional-grade tool designed for efficient stock removal and surface grinding. Featuring a turbo design with 30 grit and a 22mm bore, this cup wheel is meticulously crafted to meet the demanding needs of professionals in the construction and stone-working industries. The turbo design enhances cutting speed and performance, making it an ideal choice for a variety of applications, including concrete, natural stone, and construction products. Whether tasked with smoothing surfaces or removing excess material, the Turbo Cup Wheel from OX delivers consistent and reliable results. As a testament to OX’s commitment to quality craftsmanship, this cup wheel is designed for professional turbo cup grinding, providing durability and efficiency in every use. Elevate your grinding experience with the OX Precision Series Turbo Cup Wheel, a reliable and versatile tool that reflects the precision and resilience demanded by tradesmen in their daily work.
- Professional cup wheel for stock removal and surface grinding
- Turbo design with 30 grit and 22mm Bore
- Applications: concrete, natural stone and construction products
- Professional turbo cup grinder
(0 reviews) -
Cup WheelsOX Pro Turbo Cup Wheel – 5-Inch
Built with the tradesman in mind, the OX Turbo Cup Wheel stands as a professional-grade tool designed for efficient stock removal and surface grinding. Featuring a turbo design with 30 grit and a 22mm bore, this cup wheel is meticulously crafted to meet the demanding needs of professionals in the construction and stone-working industries. The turbo design enhances cutting speed and performance, making it an ideal choice for a variety of applications, including concrete, natural stone, and construction products. Whether tasked with smoothing surfaces or removing excess material, the Turbo Cup Wheel from OX delivers consistent and reliable results. As a testament to OX’s commitment to quality craftsmanship, this cup wheel is designed for professional turbo cup grinding, providing durability and efficiency in every use. Elevate your grinding experience with the OX Precision Series Turbo Cup Wheel, a reliable and versatile tool that reflects the precision and resilience demanded by tradesmen in their daily work.
- Professional cup wheel for stock removal and surface grinding
- Turbo design with 30 grit and 22mm Bore
- Applications: concrete, natural stone and construction products
- Professional turbo cup grinder
(0 reviews) -
Cup WheelsOX Pro Turbo Cup Wheel – 7-Inch
Built with the tradesman in mind, the OX Turbo Cup Wheel stands as a professional-grade tool designed for efficient stock removal and surface grinding. Featuring a turbo design with 30 grit and a 22mm bore, this cup wheel is meticulously crafted to meet the demanding needs of professionals in the construction and stone-working industries. The turbo design enhances cutting speed and performance, making it an ideal choice for a variety of applications, including concrete, natural stone, and construction products. Whether tasked with smoothing surfaces or removing excess material, the Turbo Cup Wheel from OX delivers consistent and reliable results. As a testament to OX’s commitment to quality craftsmanship, this cup wheel is designed for professional turbo cup grinding, providing durability and efficiency in every use. Elevate your grinding experience with the OX Precision Series Turbo Cup Wheel, a reliable and versatile tool that reflects the precision and resilience demanded by tradesmen in their daily work.
- Professional cup wheel for stock removal and surface grinding
- Turbo design with 30 grit and 22mm Bore
- Applications: concrete, natural stone and construction products
- Professional turbo cup grinder
(0 reviews) -
BurrsSABER Burrs Express Cut Ball
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical Ball Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Burrs
SABER Burrs Express Cut Cylindrical with End Cut
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Flame
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Included Angle
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Oval
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Pointed Cone
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Sets
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Pointed Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Radius Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Ball
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical with Ball Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Included Angle
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Tree Radius Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Parts BrushesSP TOOLS Bucket Parts Brush
FEATURES
- Bucket brushes” are designed for hand use in a parts washing sink or solvent container
(0 reviews) -
Burring ToolsSP TOOLS Deburring Tool (Reaming Pen)
FEATURES
- Ideal for removing burrs from holes, straight edges and curved edges
- Fitted blades are free to rotate for efficient deburring
- Large ergonomic handle with internal storage cavity for storing extra blades
- Quick change blade mechanism
- High quality high-speed steel blade stays sharp for longer
- Remove burrs from plastic, copper, aluminium & ferrous metal pipes
REPLACEMENT BLADES AVAILABLE – 10pc Replacement Blades for Deburring Tool (SP31344)
(0 reviews)
