ITM Sanding Belts 915x50mm 5pk
Features
For use with PO362
Specifications
Length : 915mm x 50mm
Grits : 40, 80, 150, 240, 400
Belts per pack : 5
Grits : 40, 80, 150, 240, 400
Belts per pack : 5
Out of stock
Related products
-
Grinding MachinesITM Bench Grinder Stand
Features
Bench Grinder Stand for use with TM400-150, TM400-200, TM400-250, TM402-200Specifications
Height: 760mm
Weight: 11.5g(0 reviews) -
Grinding MachinesITM Multitool Belt and Disc Grinding Attachment 915x100mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 36″ x 4″ wide (915 x 100mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 364 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
- Suits grinder shafts sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
(0 reviews) -
Grinding MachinesITM Bench Grinder 240V, 900W, 250mm
Features
Powerful 900W induction motor.
25mm width grinding wheels with 36 & 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother operation.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shields for increased user safety.Specifications
Motor Power: 900W
Speed: 2980RPM
Wheel Size: 250mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 32kg(0 reviews) -
Grinding MachinesITM Multitool Belt and Disc Grinding Attachment 1220x50mm
Features
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.- EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
- VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
- ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
- QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
- 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
Specifications
- 48″ x 2″ (1220 x 50mm) belt.
- 7″ (178mm) diameter disc.
- 3 1/2″ (89mm) diameter rubber contact wheel.
- 5 1/2″ (140mm) diameter drive wheel.
- The 482 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
- Suits shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
- Fitting Kit supplied.
(0 reviews)