Workshop Equipment

The ITM PRO 10 PB is a European made I.D. mounted portable pipe bevelling machine. Although it is a large capacity heavy duty machine, it can be used efficiently by a single operator, weighing in at a total of just 31.5kg.
The self-centring expandable mandrels provide quick and correct alignment to pipe.
The PRO 10 PB can simultaneously perform 3 of the following operations “” internal bevel, external bevel, J-groove bevel, face off, I.D. chamfer and counterbore. Whilst the machine can be operated with just 1 cutting insert, optimal results are achieved by using 3 cutting inserts at once.
The PRO10PBE is powered by a high torque electric motor while the PRO10PBA is powered by a pneumatic motor.

Package Includes:

• PRO 10 PB Bevelling Machine
• Electric or Pneumatic motor
• Mandrel for pipe 84mm I.D. to 269mm I.D.
• Jaw block set no. 1 to 6
• Toolbox & tools
• Coolant bottle

Motor: Pneumatic Motor 1.5kw
Power Requirements: 1750 l/min at 630 kPa
Spindle Speed: 20rpm
Weight: (with standard mandrel) 32.0kg

Motor: Electric Motor 1.8kw
Power Requirements: 230V/50Hz
Spindle Speed: 2 Speed Gearbox With Electronic Variable Speed 12 – 28; 41 – 96rpm
Weight: (with standard mandrel) 36.0kg

PRO 2 PB is a compact, handy pipe beveller that mills pipes made of carbon and stainless steel, aluminium alloys, and copper-nickels. As standard, it can face and bevel pipes from inner diameters (ID) of 22mm (0.87″) to outer diameters (OD) of 48mm (1.89″)

High-speed rotary milling head with replaceable inserts. Heavy duty milling head offers accurate bevels in a fraction of the time compared to traditional single point machining. Bevel widths up to 45mm and angles between 0° and 60°. Internal bevelling and J-groove end preparation is an available option. An optional Oval Pipe attachment is available for bevelling of pipe which is not truly round.

Power supply: Single Phase 240V
External pipe diameter range: 200-1000mm Pipe Longer Than 830mm;
200-600mm Pipes Of 400-830mm Length
Maximum pipe weight: 6 000kg With Standard Plastic Rollers On Active Support
10 000kg With Optional Steel Rollers On Active Support
Min. pipe thickness: 5mm
Pipe fixing: Mechanical With Chain
Feed rate: 100 – 1100 mm/min
Bevelling angle range: 0° – 60° With Continuous Angle Adjustment
Max OD bevel width: 45mm
Max ID bevel width: 5mm Standard, Up To 20mm – Optional
Bevelling type “œJ”: YES – Optional
“œJ” type bevelling radius: 6mm or 8mm
Overall Dimensions (with a 1.4m x 1m dia. pipe): 2372mm L x 1507mm W x 1993mm H
Weight: 1100kg

The ITM PRO 5 PB is a European made I.D. mounted pipe bevelling machine, designed for portable use by a single operator. The self-centring expandable mandrel provides quick and correct alignment to pipe or tube prior to machining operations.
The Pro 5 PB is able to simultaneously perform 3 of the following operations:
External bevel, internal bevel, face off, I.D. chamfer, J-groove bevel, and counterbore.

Use any tool bit from ID 25 mm up to OD 140 mm, provided that PRO5PB is equipped with just 1 tool bit either for facing-off or for beveling “” no mater short or long.

Pipe machining range:
32mm I.D. minimum pipe capacity
114mm O.D. maximum pipe capacity
25mm I.D. minimum pipe capacity with optional small mandrel
140mm O.D. maximum pipe capacity with optional 140mm spindle disk set
12mm maximum wall thickness

Package Includes:

• PRO 5 PB Bevelling Machine with Electric or Pneumatic Motor
• Mandrel 32mm I.D. to 107mm I.D
• 118mm spindle disc
• 3 x set of jaw blocks (1,2,3,4,5,6)
• Set of tools
• Coolant container
• Operator’s manual

Motor: Pneumatic Motor 800W
Rotational Speed: 90rpm
Air Consumption: 1600 l/min (49.4CFM)
Weight: (incl. PRO5PB) 10kg

Stationary beveller for machining straight edges of different size workpieces. Modern design, numbers of advanced control systems and innovative solutions streamlines workflow to maximize your production efficiency.

• Edge bevelling
• Ergonomic ball roller bench
• Swarf drawer
• Supplementary tables to accommodate long workpieces
• Pipe beveling attachment for pipes 50-150 mm (2-6″) OD
• 3D contact wheel control ensures proper workpiece alignment in relation to milling head
• Very high surface quality
• High speed rotary milling head equipped with 10 inserts
• Cutting inserts dedicated to various materials
• No heat affected zones or distortion of the workpiece
• Easy access to milling head and cutting inserts
• Precise setting of bevel angle from 15 up to 60 degrees and bevel width up to 30 mm
• Continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum

Voltage: 3~ 400 VAC + N+PE, 50/60 Hz
Power: 7500 W
Spindle speed (no load): 500 – 2920 rpm
Feed rate: up to 3.3 m/min
Bevel angle range: 15 – 60° with continuous angle adjustment
Bevel width: up to 30 mm
Workpiece height: from 3 mm up to 100 mm Edge Beveling
Min. workpiece width: 50 mm
Min. workpiece length: 150 mm
Pipe OD beveling: from 50 mm up to 150 mm (option)
Weight: 850 kg