12mm
Showing all 34 results
-
Grade 80 Fittings
AUSTLIFT Gearbox/Engine Lifting Bolt on Brackets
Design
- Low carbon alloy material.
- Large eye size for utilized applications.
- Link brackets require less clearance than a standard eye bolts and makes placement/ alignment much faster and easier.
- Marked with product ID, grade, working load limit and manufacture ID.
Testing
- Proof tested at 2 x WLL as per AS3776.
- Destructive tested at 4 x WLL.
- Must be used with grade 8.8 bolts or higher.
- Testing certificates available upon request.
Applications
Designed for use with engine load levellers and a variety lifting slings.
Angled brackets bolt directly to component being lifted.- Perfect for engines
- Transmissions
- Swing Gears and Bearings
- Radiators and more
Brackets accept Metric and Imperial diameter bolts.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye Nuts
AUSTLIFT Lifting Point with Key Yoke
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Lifting Swivels
AUSTLIFT Swivel Lifting Point
Large ring bolt accordingly to EN 818-4 for load ring and AS2318 for the swivel component. Used as a swiveling load ring able to swivel 360° with a pivot of 180°. Made from G80 alloy steel with Orange painted finish, manufactured with an elongated ring in metric thread sizes.
Long Thread Available – Contact us for more information.
• Marked with work load limit in tonne, nominal size in millimetre, quality mark and supplier identification. Proof tested to 1.25 x working load limit.
• Test certificate available upon request(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Turnbuckles & Shackles
AUSTLIFT Turnbuckle Commercial Eye/Eye Cast Steel
• Used in conjunction with wire rope assemblies etc. for light duty tensioning applications.
• Manufactured from malleable cast steel in zinc plated finish.
• Eye and eye end fittings for intended applications.
• Sizes available from 5mm to 24mm(0 reviews) -
Turnbuckles & Shackles
AUSTLIFT Turnbuckle Commercial Hook/Eye Cast Steel
• Used in conjunction with wire rope assemblies etc for light duty tensioning
applications.
• Manufactured from malleable cast steel in zinc plated finish.
• Hook and eye end fittings for intended applications.
• Sizes available from 5mm to 24mm.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Countersunk Socket Screws Zinc
HOBSON Countersunk Socket Screw 10.9 Zinc Metric M5
Countersunk Socket Screw 10.9 Zinc Metric M5
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Countersunk Socket Screws Zinc
HOBSON Countersunk Socket Screw 10.9 Zinc Metric M6
Countersunk Socket Screw 10.9 Zinc Metric M6
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HOBSON
HOBSON Hex Set Screw Zinc 8.8 Metric M10
Hobson Hex Set Screw Metric M10 Zinc Plated 8.8
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HOBSON
HOBSON Hex Set Screw Zinc 8.8 Metric M6
Hobson Hex Set Screw Metric M6 Zinc Plated 8.8
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HOBSON
HOBSON Hex Set Screw Zinc 8.8 Metric M8
Hobson Hex Set Screw Metric M8 Zinc Plated 8.8
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M1.6
Split Pin Mild Steel Zinc Metric M1.6
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M2
Split Pin Mild Steel Zinc Metric M2
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M2.5
Split Pin Mild Steel Zinc Metric M2.5
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M3.2
Split Pin Mild Steel Zinc Metric M3.2
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M4
Split Pin Mild Steel Zinc Metric M4
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M5
Split Pin Mild Steel Zinc Metric M5
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1/2" Impact Sockets
ITM 1/2″ Drive Deep Metric
1/2″ Drive 6pt Deep Impact Socket Metric
8mm-36mm Available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1/2" Impact Sockets
ITM 1/2″ Drive In Hex Metric
1/2″ Drive 6pt Impact In Hex Socket Metric
5mm-17mm Available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1/2" Impact Sockets
ITM 1/2″ Drive Metric
1/2″ Drive 6pt Impact Socket Metric
8mm-36mm Available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/Sets
ITM 25mm Depth Annular Cutter
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
3/4" Impact Sockets
ITM 3/4″ Drive In Hex Metric
3/4″ Drive 6pt Impact In Hex Socket Metric
10mm-27mm Available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/Sets
ITM 50mm Depth Annular Cutter
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & Wrenches
MILWAUKEE 1/2″ DRIVE METRIC DEEP 6-POINT SOCKET
Milwaukee’s range of 6-point Sockets with FOUR FLAT™ Sides have been designed from the ground up to be part of the most versatile socket family. Milwaukee® chrome sockets feature an innovative design with four parallel flat sides, which won’t roll away when they drop on the floor and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. Coming in both deep and standard sizes, each has optimised geometry on the internals to reduce bolt rounding and stripping. We back all our chrome sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & Wrenches
MILWAUKEE 1/2″ DRIVE METRIC STANDARD 6-POINT SOCKET
Our 1/2″ Drive Metric 6-Point Socket with FOUR FLAT™ Sides was designed from the ground up to be part of the most versatile socket family. MILWAUKEE® 1/2″ drive sockets feature an innovative design with four parallel flat sides, which deter rolling and are wrench-compatible. The metric socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. These deep and standard socket sizes have optimised geometry to reduce bolt rounding and stripping. We back all our 1/2” drive metric sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & Wrenches
MILWAUKEE 1/4″ DRIVE METRIC DEEP 6-POINT SOCKET
Our 1/4″ Drive Metric 6-Point Socket with FOUR FLAT™ Sides was designed from the ground up to be part of the most versatile socket family. MILWAUKEE® ¼” drive sockets feature an innovative design with four parallel flat sides, which deter rolling and are wrench-compatible. The Metric socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. These deep and standard socket sizes have optimized geometry to reduce bolt rounding and stripping. We back all our ¼” drive metric sockets with a lifetime guarantee. Our 1/4″ drive metric sockets range from 5mm to 15mm in standard and deep well sockets.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & Wrenches
MILWAUKEE 1/4″ DRIVE METRIC STANDARD 6-POINT SOCKET
Milwaukee’s range of 6-point Sockets with FOUR FLAT™ Sides have been designed from the ground up to be part of the most versatile socket family. Milwaukee® chrome sockets feature an innovative design with four parallel flat sides, which won’t roll away when they drop on the floor and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. Coming in both deep and standard sizes, each has optimised geometry on the internals to reduce bolt rounding and stripping. We back all our chrome sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & Wrenches
MILWAUKEE 3/8″ DRIVE METRIC DEEP 6-POINT SOCKET
Milwaukee’s range of 6-point Sockets with FOUR FLAT™ Sides have been designed from the ground up to be part of the most versatile socket family. Milwaukee® chrome sockets feature an innovative design with four parallel flat sides, which won’t roll away when they drop on the floor and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. Coming in both deep and standard sizes, each has optimised geometry on the internals to reduce bolt rounding and stripping. We back all our chrome sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & Wrenches
MILWAUKEE 3/8″ DRIVE METRIC STANDARD 6-POINT SOCKET
Milwaukee’s range of 6-point Sockets with FOUR FLAT™ Sides have been designed from the ground up to be part of the most versatile socket family. Milwaukee® chrome sockets feature an innovative design with four parallel flat sides, which won’t roll away when they drop on the floor and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. Coming in both deep and standard sizes, each has optimised geometry on the internals to reduce bolt rounding and stripping. We back all our chrome sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mechanics Tools
MILWAUKEE METRIC COMBINATION WRENCH
The Milwaukee® combination wrenches provide you with 25% more torque than smooth-faced wrenches with our innovative MAXBITE™ Open-End Grip. In addition to increased torque, MAXBITE™ also reduces the rounding and stripping of nuts and bolts over time. For added user benefits the wrench features an ergonomic I-Beam handle for optimised comfort and durability. Ink-filled size labels allow for easy identification and quick distinction between SAE and metric wrench sets. The Milwaukee® metric wrench sizes range from 6-36mm and is backed by Milwaukee’s lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mechanics Tools
MILWAUKEE METRIC FLEX HEAD RATCHETING COMBINATION WRENCH
Our Flex Head Ratcheting Combination Wrenches feature a market leading 2.5° of arc swing, and alongside the flex-head, allows our users to work quickly and efficiently tight spaces. With durable double-stacked pawls in the ratcheting mechanism we offer a long ratchet life and improved access with 144 ratcheting positions. MAX BITE Open-End Grip improves the ratchet wrench’s grip on nuts and bolts, offering 25% more torque than smooth-faced wrenches and preventing rounding of the fastener. Each combination wrench features a comfortable I-Beam handle design for improved ergonomics. Our ratcheting combination wrench set features ink-filled size labels for easy size identification, as well as quick distinction between SAE and metric sets. We stand behind our products, offering a Lifetime Guarantee on all of our combination ratchet wrench sets.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mechanics Tools
MILWAUKEE METRIC RATCHETING COMBINATION WRENCH
Our Metric Ratcheting Combination Wrenches feature 2.5 degrees of arc swing and 144 ratcheting positions, allowing quick and efficient work in tight spaces. This wrench has double-stacked pawls within the ratcheting mechanism, which increases durability and extends the life of the tool. The MAXBITE™ Open-End Grip improves the metric ratchet wrench’s grip on nuts and bolts, offering 25% more torque than smooth-faced wrenches. The combination wrench has an ergonomic I-Beam handle design for improved comfort and ink-filled size labels for easy size identification and quick distinction between SAE and metric sets. The MILWAUKEE® metric wrench sizes range from 8mm to 22mm and feature a Lifetime Guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye Nuts
AUSTLIFT Eye Bolt DIN580 Zinc
Eye bolts DIN580 are generally used as a removable lifting point where a rated female thread or nut can be utilised also can be used as a termination for chain, wire rope and other assembles where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish, manufactured with a standard larger eye. Only available in metric thread sizes.
• Conforms to DIN580 and DIN582 marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye Nuts
AUSTLIFT Eye Nut DIN582 Zinc
Eye Nut DIN 582 are generally used as a removable lifting point where a rated nut can be utilised. Also can be used as a termination for chain, wire rope and other assemblies where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish,manufactured with a standard larger eye. Only availablein metric thread sizes.
• Conforms to DIN 582, marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Wire Rope & Fittings
AUSTLIFT Wire Rope Grip A/S Type Galvanised
• Conforms to AS2076 and marked with AS and size under saddle.
• Heavy duty cast steel saddle and hi tensile U-bolt comes with larger nut size for greater tightening force.
• 6mm and 8mm U-bolt with dacromet finish.
• Sizes available are from 6mm to 52mm.
• Hot dipped galvanized finish on both U-bolt and saddle.NOT FOR LIFTING PURPOSES
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page