Additional information
| Size |
|---|
AUSTLIFT Lifting Point with Key Yoke
In StockRelated products
-
Lifting SwivelsAUSTLIFT Stubby Eye Bolt
Swivel Eye Bolt Points are accordingly to AS2318 for the swivel component.Used as a swiveling load ring able to swivel 360° with a pivot of 90°. Made from G100 alloy steel with Orange painted finish, manufactured with an elongated ring in metric thread sizes 8mm to 20mm.
• Marked with work load limit in tonne, nominal size in millimetre, quality mark and supplier identification.
• Designed by forged alloy steel, quenched and tempered.
• 360° rotation with 90° pivot function.
• Rated at 100% at 90° angle.
• 100% magnaflux crack detection.
• Proof tested in 2 stages.- 1.25 x working load limit with ball bearing included.
- Removal of ball bearing that is subject to damages, then 2x working load limit is applied.
• Test certificate available upon request.
(0 reviews) -
Eye Bolts & Eye NutsAUSTLIFT Eye Nut DIN582 Zinc
Eye Nut DIN 582 are generally used as a removable lifting point where a rated nut can be utilised. Also can be used as a termination for chain, wire rope and other assemblies where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish,manufactured with a standard larger eye. Only availablein metric thread sizes.
• Conforms to DIN 582, marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews) -
Eye Bolts & Eye NutsAUSTLIFT Swivel Lifting Point Yoke
- Rotates through 360° and pivots 90°.
- Manufactured from alloy steel, quenched and tempered.
- Tested in accordance with EN1677-1.
- Certified by DGUV GS-OA 15-04.
- Load rated parts are 100% magnaflux crack detected.
- Individual forged parts and cap screw are traceable to Test Certification.
- Bolts are Metric thread.
- Proof tested to 2.5 times the WLL.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL.
- Meets or exceeds all the requirements of ASME B30.26.
- Quick and simple assembly, just a tapped hole is required
(0 reviews) -
Eye Bolts & Eye NutsAUSTLIFT Bolt on Tie down Yoke
• Designed with spring, stop at any angle supplied without bolt
• Pivots 180° and allows side load lifting.
• Manufactured from forged alloy steel, quenched and tempered.
• Manufactured and tested in accordance with EN1677-1.
• Load rated parts are 100% magnaflux crack detected.
• Individual forged parts are traceable to Test Certification.
• Supplied without bolts; usage of Grade 10.9 or Grade 12.9 bolts is recommended.
• Proof tested to 2.5 times the WLL.
• All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.(0 reviews)