24mm
Showing all 19 results
-
Grade 80 FittingsAUSTLIFT Gearbox/Engine Lifting Bolt on Brackets
Design
- Low carbon alloy material.
- Large eye size for utilized applications.
- Link brackets require less clearance than a standard eye bolts and makes placement/ alignment much faster and easier.
- Marked with product ID, grade, working load limit and manufacture ID.
Testing
- Proof tested at 2 x WLL as per AS3776.
- Destructive tested at 4 x WLL.
- Must be used with grade 8.8 bolts or higher.
- Testing certificates available upon request.
Applications
Designed for use with engine load levellers and a variety lifting slings.
Angled brackets bolt directly to component being lifted.- Perfect for engines
- Transmissions
- Swing Gears and Bearings
- Radiators and more
Brackets accept Metric and Imperial diameter bolts.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Lifting Point with Key Yoke
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Lifting SwivelsAUSTLIFT Swivel Lifting Point
Large ring bolt accordingly to EN 818-4 for load ring and AS2318 for the swivel component. Used as a swiveling load ring able to swivel 360° with a pivot of 180°. Made from G80 alloy steel with Orange painted finish, manufactured with an elongated ring in metric thread sizes.
Long Thread Available – Contact us for more information.
• Marked with work load limit in tonne, nominal size in millimetre, quality mark and supplier identification. Proof tested to 1.25 x working load limit.
• Test certificate available upon request(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Turnbuckles & ShacklesAUSTLIFT Turnbuckle Commercial Eye/Eye Cast Steel
• Used in conjunction with wire rope assemblies etc. for light duty tensioning applications.
• Manufactured from malleable cast steel in zinc plated finish.
• Eye and eye end fittings for intended applications.
• Sizes available from 5mm to 24mm(0 reviews) -
Turnbuckles & ShacklesAUSTLIFT Turnbuckle Commercial Hook/Eye Cast Steel
• Used in conjunction with wire rope assemblies etc for light duty tensioning
applications.
• Manufactured from malleable cast steel in zinc plated finish.
• Hook and eye end fittings for intended applications.
• Sizes available from 5mm to 24mm.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1/2" Impact SocketsITM 1/2″ Drive Deep Metric
1/2″ Drive 6pt Deep Impact Socket Metric
8mm-36mm Available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1/2" Impact SocketsITM 1/2″ Drive Metric
1/2″ Drive 6pt Impact Socket Metric
8mm-36mm Available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/SetsITM 25mm Depth Annular Cutter
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
3/4" Impact SocketsITM 3/4″ Drive Deep Metric
3/4″ Drive 6pt Deep Impact Socket Metric
19mm-65mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
3/4" Impact SocketsITM 3/4″ Drive Metric
3/4″ Drive 6pt Impact Socket Metric
17mm-65mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/Sets
ITM 50mm Depth Annular Cutter
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & WrenchesMILWAUKEE 1/2″ DRIVE METRIC DEEP 6-POINT SOCKET
Milwaukee’s range of 6-point Sockets with FOUR FLAT™ Sides have been designed from the ground up to be part of the most versatile socket family. Milwaukee® chrome sockets feature an innovative design with four parallel flat sides, which won’t roll away when they drop on the floor and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. Coming in both deep and standard sizes, each has optimised geometry on the internals to reduce bolt rounding and stripping. We back all our chrome sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & WrenchesMILWAUKEE 1/2″ DRIVE METRIC STANDARD 6-POINT SOCKET
Our 1/2″ Drive Metric 6-Point Socket with FOUR FLAT™ Sides was designed from the ground up to be part of the most versatile socket family. MILWAUKEE® 1/2″ drive sockets feature an innovative design with four parallel flat sides, which deter rolling and are wrench-compatible. The metric socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. These deep and standard socket sizes have optimised geometry to reduce bolt rounding and stripping. We back all our 1/2” drive metric sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & WrenchesMILWAUKEE 3/8″ DRIVE METRIC DEEP 6-POINT SOCKET
Milwaukee’s range of 6-point Sockets with FOUR FLAT™ Sides have been designed from the ground up to be part of the most versatile socket family. Milwaukee® chrome sockets feature an innovative design with four parallel flat sides, which won’t roll away when they drop on the floor and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. Coming in both deep and standard sizes, each has optimised geometry on the internals to reduce bolt rounding and stripping. We back all our chrome sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & WrenchesMILWAUKEE 3/8″ DRIVE METRIC STANDARD 6-POINT SOCKET
Milwaukee’s range of 6-point Sockets with FOUR FLAT™ Sides have been designed from the ground up to be part of the most versatile socket family. Milwaukee® chrome sockets feature an innovative design with four parallel flat sides, which won’t roll away when they drop on the floor and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. Coming in both deep and standard sizes, each has optimised geometry on the internals to reduce bolt rounding and stripping. We back all our chrome sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mechanics ToolsMILWAUKEE METRIC COMBINATION WRENCH
The Milwaukee® combination wrenches provide you with 25% more torque than smooth-faced wrenches with our innovative MAXBITE™ Open-End Grip. In addition to increased torque, MAXBITE™ also reduces the rounding and stripping of nuts and bolts over time. For added user benefits the wrench features an ergonomic I-Beam handle for optimised comfort and durability. Ink-filled size labels allow for easy identification and quick distinction between SAE and metric wrench sets. The Milwaukee® metric wrench sizes range from 6-36mm and is backed by Milwaukee’s lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mechanics ToolsMILWAUKEE METRIC RATCHETING COMBINATION WRENCH
Our Metric Ratcheting Combination Wrenches feature 2.5 degrees of arc swing and 144 ratcheting positions, allowing quick and efficient work in tight spaces. This wrench has double-stacked pawls within the ratcheting mechanism, which increases durability and extends the life of the tool. The MAXBITE™ Open-End Grip improves the metric ratchet wrench’s grip on nuts and bolts, offering 25% more torque than smooth-faced wrenches. The combination wrench has an ergonomic I-Beam handle design for improved comfort and ink-filled size labels for easy size identification and quick distinction between SAE and metric sets. The MILWAUKEE® metric wrench sizes range from 8mm to 22mm and feature a Lifetime Guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Bolt DIN580 Zinc
Eye bolts DIN580 are generally used as a removable lifting point where a rated female thread or nut can be utilised also can be used as a termination for chain, wire rope and other assembles where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish, manufactured with a standard larger eye. Only available in metric thread sizes.
• Conforms to DIN580 and DIN582 marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Eye Bolts & Eye NutsAUSTLIFT Eye Nut DIN582 Zinc
Eye Nut DIN 582 are generally used as a removable lifting point where a rated nut can be utilised. Also can be used as a termination for chain, wire rope and other assemblies where required.
Various sizes available
• Made from C15 carbon steel with zinc plated finish,manufactured with a standard larger eye. Only availablein metric thread sizes.
• Conforms to DIN 582, marked with working load limit in tonne, nominal size in millimetre, quality grade, batch numbered and supplier identification.
• Proof tested to 2 x working load limit and minimum breaking force of 6 x working load limit.
• Test certificates are available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page