Shop
Showing 289–324 of 3071 results
-
Jackets/Rainwear
DNC Hi-Vis Lightweight Rain Pants
DNC Hi-Vis Lightweight Rain Pants 3880
Sizes: S – 6XL
Colours: Orange/Navy, Yellow/Navy
- SUN Protection UPF 40+ – 50+ DNC garments are tested for UPF (ultraviolet protection factor) in accordance with AS/NZS4399:1996. The level of protection varies depending on the fabric and colour of the garment. 15+ good protection, 30+ / 35+ very good protection, 40+ / 50+ excellent protection.
- Environmentally Friendly Green Dye Oeko-Tex Standard 100 Safe to wear against the skin All DNC garments use the Green Dye only, except for the Patrol Saint Flame Retardant range. All DNC garment fabric fully complies with Oeko-Tex standard 100 class II for products with direct contact to the skin in which prohibited to use aromatic amines, sensitizing dyes and cancer risk dyes. Green dye should meet the following conditions: Does not contain harmful or non-aromatic amine; dye itself, non[1]carcinogenic, sensitization, acute toxicity; the use of formaldehyde and, after extraction of heavy metals in the following limits; non-environmental hormone; non persistent organic pollutants; does not produce pollution of the environment harmful chemicals; not produce chemicals that pollute the environment; colour fastness and superior to disable the use of dyes.
- Waterproof DNC Rainwear and HiVis Jackets are made of a polyester outer, PU coated inner and all seam sealed 100% waterproof.
- HiVis Day Fabric & Design New AS/NZS 4602.1:2011 DNC HiVis garments are manufactured to comply with New Hi Vis standard Class F AS/NZS1906.4:2010, Class D AS/NZS 4602.1:2011 to meet the requirements of Hi-Vis safety standards for both HiVis Fabric & Design of garments, (Section 6.4) day use.
- Lightweight DNC provide entire ranges of lightweight fabrics as an alternate to regular weight garments. Features include quicker drying, breathable and a more comfortable light weight feel.
- CSR Reflective Tape Alternatively DNC also use premium quality Reflective Tape for the value hi-vis range. CSR Reflective tape fully complies with AS/NZS1906.4:2010 for Hi Vis material. Home wash 50 Cycles @ 60° C
(0 reviews) -
Site Safety
GORILLA 450mm Wide Adjustable Height Work Platform
- Adjustable heights from 0.6 – 0.9m
- Large platform area: 1100x450mm
- Positive locks
- Integrated extension brackets allows you to join units together
- 150kg Industrial load rating
MW105-I450WB Adjustable 0.6 – 0.9m
2.6 – 2.9m
450mm
(0 reviews) -
Site Safety
GORILLA Expanda Scaff Aluminium Scaffold
The Gorilla Expanda Scaff has been specially designed by one of Australia’s leading scaffolding companies (No Bolt) to incorporate strength, durability and most importantly flexibility. The Expanda Scaff incorporates a unique design that allows you to expand up and out by adding additional free standing core packs, making it incredibly versatile.
Item Code Description Content of Pack / Information GS-01
Core Pack
4x horizontals
1x diagonal brace
2x end frames
1x platform with trapdoor
4x 150mm locking castorsGS-01A
Riser Pack
4x horizontals
1x diagonal brace
2x end framesGS-02
Outrigger Pack
4x outrigger braces
Required when scaffold is higher than single level
GS-03
Joiner Pack
1x joiner plank
4x joiner clampsRequired to join scaffold packs side by side
GS-KICKB
Kick Boards
Set of 4 timber kickboards
Fits around a single platformRequired when platform is located 2m or higher
ASL-009-1
2.7m Scaffold Ladder
1x 2.7m straight ladder
2x scaffold hooksSuits 2-high configuration
ASL-015-1
4.6m Scaffold Ladder
1x 4.6m straight ladder
2x scaffold hooksSuits 3-high configuration
(0 reviews) -
Ladders
Gorilla Heavy Duty Aluminium Double Sided Ladder
180kg Industrial Load Rating
Model Ladder Height Reach Height* SM003-HD
0.9m
2.3m
SM004-HD
1.2m
2.6m
SM006-HD
1.8m
3.2m
SM008-HD
2.4m
3.8m
SM010-HD
3.0m
4.4m
SM012-HD
3.6m
5.0m
(0 reviews) -
Site Safety
GORILLA Heavy Duty Fibreglass Double Sided Ladder
180kg Industrial Load Rating
Model Ladder Height Reach Height* FSM003-HD
0.9m
2.3m
FSM004-HD
1.2m
2.6m
FSM006-HD
1.8m
3.2m
FSM008-HD
2.4m
3.8m
FSM010-HD
3.0m
4.4m
FSM012-HD
3.6m
5.0m
(0 reviews) -
Ladders
GORILLA Heavy Duty Fibreglass Platform Ladder
- Adjustable height for versatility
- Handrail 900mm above platform meets OH&S requirements
- 180kg industrial load rating
Model Platform Height Reach Height* FPL002-HD
0.6m
2.6m
FPL003-HD
0.9m
2.9m
FPL004-HD
1.2m
3.2m
FPL005-HD
1.5m
3.5m
FPL006-HD
1.8m
3.8m
FPL008-HD
2.4m
4.4m
(0 reviews) -
Site Safety
GORILLA Heavy Duty Height Adjustable Aluminium Platform Ladder
- Adjustable height for versatility
- Heavy duty design
- Handrail 900mm above platform meets OH&S requirements
- 180kg industrial load rating
Model Platform Height Reach Height* PL0304-HD
0.9 – 1.2m
2.9 – 3.2m
PL0406-HD
1.2 – 1.8m
3.2 – 3.8m
PL0508-HD
1.5 – 2.4m
3.5 – 4.4m
(0 reviews) -
Height Safety
GRIPPS Adjustable Two-Way Radio Holster
Compatible with virtually every Two-Way Radio on the market, the Adjustable Radio Holster is also compatible with other small electronic devices such as phones and cameras.
Easily mounted to either work belts or harnesses, the Adjustable Radio Holster uses a two-way Velcro mounting sleeve to secure itself to the user.
Use in conjunction with a GRIPPS® Coil E-Tether With E-Catch.
Key Features
- Compatible with all standard work belts.
- Fully adjustable to be compatible with virtually all Two-Way Radios.
- Suitable for use with all small electronic devices such as phones & cameras.
- Easily mountable to work belts or harnesses via a two-way Velcro mounting sleeve.
Kit Contents
- 1 x Two-Way Radio Holster
- 1 x Non-Conductive Coil E-Tether With Poly Clip
- 1 x E-Catch
Specifications
- Max Load: 0.5kg / 1.1lbs
- CONFORMS TOÂ ANSI/ISEA 121-2018
(0 reviews) -
Accessories
GRIPPS Adjustable Wrist-Anchor With Tool Tether
Tether your hand tools with comfort and security using the Adjustable Wrist-Anchor. This ‘one size fits all’ wristband features a built-in, load rated tether anchor to tether hand tools to.
Industrial-grade Velcro repels dust, grease and grime to keep your Adjustable Wrist-Anchor firmly secured at all times, while tactical elastic webbing protects against tears.
Key Features
- Light, flexible & strong.
- Can be attached to hand-rails or your wrist.
- Industrial grade Velcro adjusts diameter to suit any wrist or rail size.
- Suitable for use with our H01067, H01062 and H01060 wrist tethers
Kit Contents
- 1 x Adjustable Wrist Anchor
- 1 x Webbing Wrist Tether Single-Action
Specifications
- Max Load: 2.5kg / 5.5lbs
- Conforms to ANSI/ISEA 121-2018
(0 reviews) -
Rope & Lanyards
GRIPPS Bungee Tether Dual-Action – 7.0kg
The most popular tether in the GRIPPS® range, with an additional dual-action carabiner for even faster attachment.
This versatile tether with carabiners on both ends means you avoid spending time hitching your tether to an anchor point. It also provides the versatility of being able to move between anchor points without having to untether your tool.
Along with being incredibly lightweight, the elastic properties of the durable bungee material absorbs the downward force from a dropped tool.
When arresting the fall of a dropped tool, the Bungee Tether Dual-Action extends up to 40cm/16″ to absorb the downward force from a dropped tool, stabilising the user while protecting against bounce-back.
Key Features
- Two dual-action carabiners with swivel heads.
- Lightweight & compact design.
- Heavy-duty elasticised webbing.
- Force absorption & bounce-back protection.
Specifications
- Min Length: 90cm / 35″
- Max Length: 1.3m / 51″
- Max Load: 7.0kg / 15lbs
- Two Dual-Action Carabiners
- Conforms to ANSI/ISEA 121-2018
(0 reviews) -
Rope & Lanyards
GRIPPS Coil Tether Single Action 1kg
Tethering to a tool belt, pouch, holster, or harness, the Coil Tether Single-Action is engineered to stay out of the way when not in use, readily extending to its maximum length when the tool is in use.
Lightweight single-action carabiners mounted on swivel heads prevent tangles and unnecessary tension while using your tool.
The extra-thick PU coating on the stainless steel coil prevents kinking and is resistant to heat and sharp edges.
Key Features
- Two lightweight single-action carabiners.
- Suitable for holsters, belts, pouches & harnesses.
- Low profile & lightweight design.
- Extra thick PU coated stainless steel coil.
- Heat & cut resistance.
Specifications
- Min Length: 40cm / 16″
- Max Length: 1.6m / 63″
- Max Load: 1.0kg / 2.2lbs
- Two Single-Action Carabiner
(0 reviews) -
Accessories
GRIPPS Electrical Trade Kit
An end-to-end solution covering the entire suite of hand and power tools used by Electricians.
Tethers up to 31 tools.
Kit Contents
- 1 x H02056 Tape Measure Catch
- 1 x H10100 Bungee Tether Dual-Action 5.0kg
- 1 x H01068 Coil tether Single-Action
- 1 x H01021 Swivel Catch
- 10 x H01007 Tool Catch (Non-Conductive)
- 1 x H01010 V-Gripp Tape
- 1 x H01067 Webbing Wrist Tether Single-Action
- 1 x H01062 Coil Single-Action Wrist Tether (Non-Conductive)
- 1 x H01142 Belt-Loop Anchor
- 1 x H01085-M Slip-On Wrist Anchor (Medium)
- 10 x H01030 Screwlock Cable – 3.0mm x 12cm / 0.1″ x 4.75″
- 1 x H03048 Little Gripper Kit
(0 reviews) -
Accessories
GRIPPS Lifting Bag – Bison Bag 45kg
Loaded with features, the Bison Bag provides a comprehensive solution to tool management, transportation and tethering for working at height.
Tether anchors inside and outside the bag keep tools secure and accessible, and an extra heavy-duty drawstring closure keeps contents secured against spills and drops.
Built for harsh industrial environments from extra heavy-duty 26oz. canvas, the Bison Bag protects against punctures with a composite insert built right into the base of the bucket.
A load rated lifting strap allows for easy transportation of the Bison Bag to the work area.
Key Features
- Heavy-duty drawstring closure protecting against spills & drops.
- Multiple inner pockets for comprehensive tool organisation.
- Puncture-proof composite insert in the bucket base.
- Tether anchor points on the inside & outside of the bucket.
- Constructed from extra heavy-duty 26oz canvas.
Specifications
- Max Load (D-Ring): 2.5kg / 5.5lbs
- Max Load (Straps): 45kg / 99lbs
- Height: 40cm / 16″
- Diameter:Â 30cm / 12″
(0 reviews) -
Accessories
GRIPPS Lifting Bag – Bull Bag 113kg
Arguably the most robust lifting bag in the world, the reinforced Bull Bag features a smart locking Velcro mesh sleeve that protects against accidental spills and drops while allowing light into the bag.
Load rated reinforced lifting straps allow for easy transportation of the Bull Bag to the work area, and built-in tether anchor points mean the tools are ready to be used as soon as the bag is opened.Â
Made from an extra heavy-duty and oil-repellent vinyl, with a reinforced fabric rim to protect the opening from damage.
Key Features
- Heavy-duty Velcro closure with locking feature protects against accidental spills.
- Load-rated fabric strip provides an additional 6 tether anchor points.
- Rubber feet protect the base of the bag &Â provide stabilisation on hard surfaces.
- A reinforced rim around the bag opening protects against damage.
- A strong composite insert in the base of the bag protects against punctures.
- Made with extra heavy-duty oil-repellent vinyl & tested to last in the harshest of construction environments.Â
- Strong mesh sleeve allows light into the bag & keeps it rigid whilst upright.
- Built-in tether anchor points inside the bucket, enabling tools to be tethered directly to the inside of each bag.
Specifications
- Max Load (D-Ring): 2.5kg / 5.5lbs
- Max Load (Lifting):Â Â 113kg / 249lbs
- Height:Â 38cm / 15″
- Diameter: 31cm / 12″
- Dual-Action Carabiner
(0 reviews) -
Accessories
GRIPPS Little Gripper Kit
If you need a tool tethering solution that’s quick to apply and doesn’t hamper tool functionality, then you need a Little Gripper.
Moulded from a specialised TPU material, the Little Gripper provides an instant load-rated tool connection point without the need for adhesives.
Compatible with round and polygonal-shaped shafts, the 4 sizes cover a massive range of tools including screwdrivers, punches and more.
Key Features
- Moulded from custom German-engineered TPU compounds.
- No additional adhesives or tools are required for application.
- UV-protected for long-lasting outdoor use.
- Compatible with tool shafts of all shapes & thicknesses.
Kit Contents:
- 2Â x Size #1 Little Gripper
- 2Â x Size #2 Little Gripper
- 2Â x Size #3 Little Gripper
- 2Â x Size #4 Little Gripper
- 4 x GrippLink Connectors
Specifications
Size Tool Shaft Diameter Max Load
(Without GrippLink)Max Load
(With GrippLink)#1 Â 3.5mm – 6.0mm
0.1″ – 0.2″0.5kg
1.1lbs1.0kg
2.2lbs#2 Â 5.5mm – 9.0mm
0.2″ – 0.3″0.5kg
1.1lbs1.0kg
2.2lbs#3 8.0mm – 13mm
0.3″ – 0.5″0.5kg
1.1lbs2.5kg
5.5lbs#4 12mm – 16mm
0.5″ – 0.6″0.5kg
1.1lbs2.5kg
5.5lbs(0 reviews) -
Accessories
GRIPPS Lockjaw Climbers Bag – 10kg
Robust, lightweight and packed with tether anchor points, the Lockjaw Climbers Bag keeps tools tethered and accessible whether they’re inside or outside of the bag.
A zip closure keeps contents safe and secure during transportation, while an in-built metal-snap mechanism holds the bag open and the contents accessible when on the job.
Heavy-duty tether anchors inside the bag complement an array of tether anchors on the outside, to ensure tools remain tethered during all stages of the job. Inner sleeves keep tools organised inside the bag.
Key Features
- Heavy-duty tether anchors installed inside & outside the bag.
- Heavy-duty zip closure for security against contents falling out.
- Metal snap-mechanism holds bag open or snaps it shut.
- Inner pockets for tool organisation.
Specifications
- Height:Â 30cm / 12″
- Diameter:Â 20cm / 8.0″
- Max Load (D-Ring): 2.5kg/5.5lbs
- Max Load (Lifting): 10kg / 22lbs
- Conforms to ANSI/ISEA 121-2018
(0 reviews) -
Accessories
GRIPPS Mechanical Fitters Trade Kit
Tether a full range of Power Tools, Spanners, Wrenches and other tools used by Mechanical Fitters, with anchoring options to the waist, wrist or external structures such as rails.
Tethers up to 36 tools.
Kit Contents
- 10 x H01037 Tool Ring – 25mm / 1.0″
- 1 x H01021 Swivel Catch
- 10 x H01005 Tool Catch – 12mm x 55mm / 0.5″ x 2.25″
- 1 x H01010 V-Gripp Tape
- 2 x H01073 Bungee Tether Dual-Action 7.0kg
- 1 x H01068 Coil Tether Single-Action
- 1 x H01142 Belt-Loop Anchor
- 1 x H01085-M Slip-On Wrist Anchor (Medium)
- 1 x H01067 Webbing Wrist Tether Single-Action
- 1 x H02056 Tape Measure Catch
- 10 x H01030 Screwlock Cable – 3.0mm x 12cm / 0.1″ x 4.75″
- 1 x H03048 Little Gripper Kit
(0 reviews) -
Accessories
GRIPPS Phone Gripper with Coil Tether
Now you can tether your phone or mobile device without the need for a permanent or semi-permanent connection point. Used in conjunction with a load rated tether, the Phone Gripper and Tablet Gripper use purpose-built silicon to create a load rated tethering solution with zero impact on device operation.
Traditional mobile device tethering relies on the use of powerful adhesives being applied directly to your mobile device to attach a load rated connection point that damages the devices finish when removed.Â
The flexible design of the Phone Gripper allows you to tether your mobile device ‘on-demand’, allowing you free use of your mobile device when operating at height.
Key Features
- Custom silicon compound made for strength & grip.
- Avoids installing a permanent connector point on a mobile device.
- No additional adhesives required.
- Integrated, load rated tether connection eyelet.
- Compatible with virtually every smartphone model.
Specifications
- Max Load: 0.3kg / 0.7Ibs
- Conforms to ANSI/ISEA 121-2018
(0 reviews) -
Accessories
GRIPPS Ratchet/Wrench Holster MKII
Engineered to carry a wide range of ratchets and wrenches, the Ratchet/Wrench Holster makes transporting and using your tools a breeze when working at height.
This holster also includes the option for a horizontal-release retractor unit.
Key Features
- Compatible with all standard work belts.
- 2 x load rated D-Rings.
- Drain hole.
- Lightweight design with industrial toughness.
- Compatible with GRIPPS® Retractor Units.
Specifications
- Max Load (D-Ring): 2.5kg / 5.5lbs
- Conforms to ANSI/ISEA 121-2018
(0 reviews) -
Accessories
GRIPPS Safety Glasses Tether
Eye-wear is an essential piece of PPE for many industrial workers. While working at height, it’s particularly easy to accidentally knock or drop your glasses, so GRIPPS have developed our own super light Safety Glasses Tether. Easily adjustable to suit your neck for comfort, they also come with very strong slide-on style GRIPPS to attach to your sunglasses, personal glasses or PPE eyewear. Eliminate the stress of potentially dropping your glasses, with the highly convenient Safety Glasses Tether. An essential item that you can easily slip into your pocket, keep in the car, toolbox or simply wear daily!
Features:
- Premium quality wire rope straps
- Silicone rubber grips that securely hold all styles of safety glasses
- Adjustable length
- Load rated
Specifications:Product Code: H10000Max Load:Â 0.1KG / 0.22LBS
Length Closed:Â 230MM / 9IN* PPE Glasses not included
(0 reviews) -
Accessories
GRIPPS Screwlock Cable
The Screwlock Cable provides a quick, easy and cost-effective way to create a certified, load-rated tool connection point for tools with a suitable existing hole.
With a core band made from aircraft-grade steel, the load-rated and certified Screwlock Cable is as dependable as it is hard-wearing.
Create your secure tool connection point by simply threading the Screwlock Cable through a suitable existing hang-hole/slot in your tool, and screw closed. Add a drop of thread-locking compound before you screw shut to create a permanent load rated connection point on your tools.
Key Features
- PU coated aircraft-grade steel.
- Easy to maintain & swap between tools.
- Easy installation process that can be performed on-site.
- Can be locked permanently using thread locking compounds.
- Available in four sizes.
Specifications
- Size: 3mm x 150mm / 0.1″ x 6.0″
- Max Load: 1.0kg / 2.2lbs
Conforms to ANSI/ISEA121-2018
(0 reviews) -
Accessories
GRIPPS Seal Kit Bag -20kg
GRIPPS Seal Bags are heavy-duty, hard-wearing, waterproof gear bags designed for the most demanding of industrial work sites. Engineered utilising reinforced tarpaulin material and featuring detachable shoulder straps and water-resistant zips, these bags are ready for any work site. A solid duffle bag to add to your work gear collection.
Features:Â- Heavy-duty weatherproof PVC tarpaulin barrel bag
- #10 water-resistant zips
- 20kg (44lbs)Â load rating
- Removable padded shoulder straps convert barrel bag to backpack
- Heavy-duty 2″ webbing encircles the bag for extra strength
- End haul handles
- Twin QR compression straps
Specifications:Volume: 65L / 17 gal
Dimensions: 60 x 35 x 35cmWeight 1.6 kg(0 reviews) -
Accessories
GRIPPS Tablets Gripper with Coil Tether
Now you can tether your tablet without the need for a permanent or semi-permanent connection point. Used in conjunction with a load rated tether, the Tablet Gripper use purpose-built silicon to create a load rated tethering solution with zero impact on device operation.
Traditional mobile device tethering relies on the use of powerful adhesives being applied directly to your mobile device to attach a load rated connection point that damages the devices finish when removed.Â
The flexible design of the Tablet Gripper allows you to tether your mobile device ‘on-demand’, allowing you free use of your mobile device when operating at height.
Key Features
- Custom silicon compound made for strength & grip.
- Avoids installing a permanent connector point on a mobile device.
- No additional adhesives required.
- Integrated, load rated tether connection eyelet.
- Compatible with virtually every tablet model.
Specifications
- Max Load: 0.85KG
- Conforms to ANSI/ISEA 121-2018
- Â Coil Tether Single-Action Max Load: 1KG/2.2LBS
(0 reviews) -
Accessories
GRIPPS Water Bottle Holder – Waterboy
Keep drinks cool and spray cans secure with the Waterboy.
Constructed from synthetic rubber that insulates against heat, the top securing flap has been engineered to allow full functionality of a spray can form within the holster, as well as access to water bottle pop-tops and screw tops.
A load-rated poly D-Ring allows the holster and its contents to be tethered securely against drops.
If carrying on a belt, the Waterboy can be clipped on using the in-built metal clip.
Key Features
- Insulated synthetic rubber design that can stretch to accommodate most sizes of bottles & cans.
- Full functionality of spray cans & screw/pop-top water bottles whilst in the holster.
Specifications
- Max Load: 0.75kg / 1.6lbs
(0 reviews) -
Pliers & Cutting
HIT Concrete Mesh Cutters
- Specially designed for cutting extra hard steel concrete mesh
- Small cutting head provides easy access into restricted spaces
- Comfortable rubber handles ensure a firm and safe grip during operation
- Replacement cutting heads also available
- Maximum hardness of material to be cut: Brinell 450/Rockwell C48/162kg/mm2
- Made in Japan
ATTRIBUTES
Cutting Cap. High Tensil 162kg/mm 8mm Cutting Cap. Soft Metal 49.6/mm² 10mm Length 800mm Spare Head Part No. HITRCAC800 Type of Jaw Centre Cut Weight 3.15kg (0 reviews) -
Accessories/Parts
HIT Hand Riveter
- Compact and lightweight design
- Strong durable construction ensures precise riveting
- Comfortable spring loaded plastic moulded handles
- 4 interchangeable nose pieces for 2.4mm 3.2mm 4.0mm and 4.8mm rivets
- Wrench supplied for interchanging screw in nose pieces
- Made in Japan
ATTRIBUTES
Capacity 2.4/ 3.2/ 4.0/ 4.8mm Description – Short Strong durable construction ensures precise riveting
Spring loaded
4 interchangeable nose pieces for 2.4mm, 3.2mm, 4.0mm and 4.8mm rivets
Made in JapanLength 260mm Weight 0.65kg (0 reviews) -
Pliers & Cutting
HIT High Tensile Bolt Cutters
- Recommended for heavy duty use
- Durable jaws are forged from high tensile alloy steel that is specially heat treated and suitable for cutting hard materials
- Short cutting edge to cut through chain links, high tensile bolts, rods and high tensile wire for pre-stressed concrete, etc
- Maximum hardness of material to be cut: Brinell 450, Rockwell C48, 162kg/mm2 or 110 tonnes/sq.in
- Made in Japan
(0 reviews) -
Wrench
HIT Pipe Wrench Aluminium 300mm
-
- Handle made from dropped forged aluminium for maximum strength and durability
- Lightweight construction allows for greater portability
- Floating forged steel jaws allow for fast ratcheting action
- Must have tool for all plumbers, gas and steam pipe fitters
- Wide and smooth teeth are ideal for vinyl coated pipes
- Knurled locking nut makes for easy adjustment
- Hook jaw with spring suspension for quick grip and release
- Made in Japan
ATTRIBUTES
Length 300mm Max. Opening 60mm Pipe Size inch 1-1/2 inch Weight 0.57kg
(0 reviews) -
-
Pliers & Cutting
HIT Threaded Rod Cutter 10mm
- A must for construction sites where threaded rods are used to secure pipe, conduit sprinkler systems, ductwork, lighting, ceiling and many other construction applications
- Cuts fast, clean, with precision and eliminates grinding, filing and thread restoring
- Drop forged high grade alloy steel head
- Specially heat-treated cutting dies last up to 3000 cuts, the life of the die can be extended by switching to the alternate side
- Features pre cast holes for permanent mounting to any work surface
- Lightweight and easy to use
- Interchangeable dies available for metric and imperial sizes
- Made in Japan
ATTRIBUTES
Capacity Diameter 10mm Capacity Pitch 1.50 Die and Screw Sets Spare Part No. HITTRCC10 Length 740mm Weight 4.14kg (0 reviews) -
Countersunk Socket Screws Zinc
HOBSON Countersunk Socket Screw 10.9 Zinc Metric M10
Countersunk Socket Screw 10.9 Zinc Metric M10
(0 reviews) -
Countersunk Socket Screws Zinc
HOBSON Countersunk Socket Screw 10.9 Zinc Metric M12
Countersunk Socket Screw 10.9 Zinc Metric M12
(0 reviews) -
Countersunk Socket Screws Zinc
HOBSON Countersunk Socket Screw 10.9 Zinc Metric M16
Countersunk Socket Screw 10.9 Zinc Metric M16
(0 reviews) -
Countersunk Socket Screws Zinc
HOBSON Countersunk Socket Screw 10.9 Zinc Metric M5
Countersunk Socket Screw 10.9 Zinc Metric M5
(0 reviews) -
Countersunk Socket Screws Zinc
HOBSON Countersunk Socket Screw 10.9 Zinc Metric M6
Countersunk Socket Screw 10.9 Zinc Metric M6
(0 reviews) -
Countersunk Socket Screws Zinc
HOBSON Countersunk Socket Screw 10.9 Zinc Metric M8
Countersunk Socket Screw 10.9 Zinc Metric M8
(0 reviews) -
Countersunk Socket Screws Stainless Steel
HOBSON Countersunk Socket Screw 316 Stainless Steel Metric M10
Countersunk Socket Screw 316 Stainless Steel Metric M10
(0 reviews)