ALEMLUBE Brass Sight Gravity Drip Feed Oiler 1/4″ Od
- Alemlube brass sight gravity drip feed oiler
- Provides accurate control of flow rate from bulk reservoir to the bearing
- Sight window for visual flow indication
- 1/4″ OD with 1/8″ BSP fitting connection
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
Related products
-
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Sight Gravity Brass Drip Feed Oiler Plastic Reservoir 150ml
- Alemlube sight gravity brass drip feed oiler plastic reservoir 150ml capacity
- Made from brass, plexiglass & nitrile seals
- 3/8″ BSP fitting with 150ml capacity
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMITE Relief Fitting 1/8″ Npt 45 – 80 Psi
- Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
- Flush type fitting with 1/8″ NPT thread type
- Relief pressure minimum 1 PSI, maximum 5 PSI
- Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
- Exceeds 72-hour salt spray test
- Trivalent zinc plating
- RoHS compliant
- Fittings open at predetermined pressure
- May be used with grease or oil
- Complete range of oil relief fittings & oil air vents available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMITE Relief Fitting 1/8″ Npt 400 – 650 Psi
- Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
- Flush type fitting with 1/8″ NPT thread type
- Relief pressure minimum 400 PSI, maximum 650 PSI
- Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
- Exceeds 72-hour salt spray test
- Trivalent zinc plating
- RoHS compliant
- Fittings open at predetermined pressure
- May be used with grease or oil
- Complete range of oil relief fittings & oil air vents available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Constant Level Oiler Hinged Lid 1/8″ Bsp 85ml
- Alemlube constant level oiler hinged lid plastic bottle type 85ml capacity
- Steel or aluminium body with zinc plated finish
- Plastic bottle type with transparent view
- 1/8″ BSP fitting with 85ml capacity
- Complete range of bayonet type, hinged, side entry & base entry constant level oilers available
(0 reviews)