Shop
Showing 2989–3024 of 6788 results
-
Annular Cutters & SetsITM Holemaker Silver Series 3pc Cutter Set – 25mm Depth
Set Includes:
1x AS1425 14mm x 25mm
1x AS1825 18mm x 25mm
1x AS2225 22mm x 25mm
1x SP16003 Short Pilot PinM2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews) -
Annular Cutters & SetsITM Holemaker Silver Series 5pc Set – 25mm Depth
Set Includes:
1x AS1425 14mm x 25mm
1x AS1625 16mm x 25mm
1x AS1825 18mm x 25mm
1x AS2025 20mm x 25mm
1x AS2225 22mm x 25mm
1x SP16003 Short Pilot PinM2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews) -
Ventilators & FansITM Industrial Fan 30″ 3 Speed Oscillating Pedestal
Features
Quality robust construction designed for everyday use in industrial workshops.
Zinc coated mesh.
Powder coated steel frame.
High output & quiet running 3 speed motor.
Oscillating functionSpecifications
Description: Pedestal Fan
Blade Diameter: 750mm (30”)
Motor: 240V 280W 3 Speed
Flow Rate: 290m³/min
Noise @ 7m Full Load: 61dB
Adjustable Height: 1490mm to 1650mm(0 reviews) -
Ventilators & FansITM Industrial Fan 30″ 3 Speed Oscillating Wall Mount
Features
Quality robust construction designed for everyday use in industrial workshops.
Zinc coated mesh.
Powder coated steel frame.
High output & quiet running 3 speed motor.
Oscillating functionSpecifications
Description: Wall Mount Fan
Blade Diameter: 750mm (30”)
Motor: 240V 280W 3 Speed
Flow Rate: 290m³/min(0 reviews) -
Drill Bits & SetsITM Jobber Drill Set 25pc
HOLEMAKER JOBBER DRILL SET HSS, 118° SPLIT POINT, 25PCE , 1.0-13.0MM X 0.5
Set Includes Sizes:
- 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm, 11mm, 11.5mm, 12mm, 12.5mm, 13mm
- Plastic Case
(0 reviews) -
Automotive SuppliesITM Locking Plier 275mm
- Size: 275mm
- Max Jaw Opening: 85mm
- Max clamping capacity: 60mm
- Max Jaw depth: 70mm
(0 reviews) -
Automotive SuppliesITM Locking Plier 275mm C Clamp Swivel Pad
- Size: 275mm
- Max Jaw Opening: 85mm
- Max clamping capacity: 75mm
- Max Jaw depth: 62mm
(0 reviews) -
Automotive Supplies
ITM Locking Plier 450mm C Clamp Swivel Pad
- Size: 450mm
- Max Jaw Opening: 255mm
- Max clamping capacity: 210mm
- Max Jaw depth: 250mm
(0 reviews) -
Air & Power ToolsITM M7 Air Grit Blasting Gun 1L
For removing rust, old paint and ingrained dirt etc.
Adjustable nozzle.
Hanger hookCup Capacity: 1L
Air Requirements: 4.3 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 280mm
Net Weight: 0.57kg
Sound Pressure: 85dBA(0 reviews) -
Chemicals, Lubricants & AdhesivesITM M7 Air Tool Oil
Suitable for use with all air tools.
(0 reviews) -
Air & Power ToolsITM M7 Angle Grinder 100mm 1.3HP
Available with imperial or metric spindle sizes.
Safety lever throttle.
1.3 HP motor for stall resistance.
One piece housing reduces maintenance costs.
Heavy duty air cooled spiral gears and double bearings for durability.
Swivel guard on 115mm & 125mm.
Grinding wheel not includedWheel Diameter: 100mm (4″)
Spindle Size: M10 x 1.5
Free Speed: 11000 RPM
Air Requirements: 4.2 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 232mm
Rated Power: 1.3HP
Net Weight: 1.81kg
Sound Pressure: 90 dBA
Vibration Level: 5.79 (A)m/s²(0 reviews) -
Air & Power Tools
ITM M7 Angle Grinder 125mm 1.3HP Swivel Guard
Available with imperial or metric spindle sizes.
Safety lever throttle.
1.3 HP motor for stall resistance.
One piece housing reduces maintenance costs.
Heavy duty air cooled spiral gears and double bearings for durability.
Swivel guard.
Grinding wheel not includedWheel Diameter: 125mm (5″)
Spindle Size: M14 x 2.0
Free Speed: 11000 RPM
Air Requirements: 4.2 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 232mm
Rated Power: 1.3HP
Net Weight: 1.81kg
Sound Pressure: 90 dBA
Vibration Level: 7.06 (A)m/s²(0 reviews) -
Air & Power ToolsITM M7 Belt Sander
Belt Size: 20mm x 520mm (3/4″ x 19″)
Free Speed: 16000 RPM
Air Requirements: 4 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 430mm
Net Weight: 1.4kg
Sound Pressure: 88 dBA
Vibration Level: 1.3m/s²(0 reviews) -
Air & Power ToolsITM M7 Die Grinder 20,000RPM 1/4″ & 1/8″
Metal front cap.
Safety lever throttleCollet Size: 1/4″ & 1/8″
Free Speed: 20000 RPM
Air Requirements: 10 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 190mm
Rated Power:0.9HP
Net Weight: 0.65kg
Sound Pressure: 75.7 dBA
Vibration Level: 0.8m/s²(0 reviews) -
Air & Power ToolsITM M7 Die Grinder 25,000RPM 1/4″ & 1/8″
Extended air die grinder.
Safety lever throttleCollet Size: 1/4″ & 1/8″
Free Speed: 25000 RPM
Air Requirements: 10 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 280mm
Rated Power:0.3HP
Net Weight: 0.63kg
Sound Pressure: 81.5 dBA
Vibration Level: 1.8m/s²(0 reviews) -
Air & Power ToolsITM M7 Die Grinder Angle Head 19,000RPM
90° angle head.
Safety lever throttleCollet Size: 1/4″ & 1/8″
Free Speed: 19000 RPM
Air Requirements: 10 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 160mm
Rated Power:0.3HP
Net Weight: 0.51kg
Sound Pressure: 74.4 dBA
Vibration Level: 1.7m/s²(0 reviews) -
Air & Power ToolsITM M7 Drill 1100RPM 1/2″ Capacity
Chuck Size: 1/2″ (13mm)
Free Speed: 1100RPM
Air Requirements: 4 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 270mm
Net Weight: 1.58kg
Sound Pressure: 90 dBA
Vibration Level: 3m/s²(0 reviews) -
Impact WrenchITM M7 Impact Wrench 1/2″ Drive
Magnesium alloy & composite material construction.
Extremely powerful & very lightweight.
Twin hammer type clutch.
Patented EZ Grease AnvilSquare Drive: 1/2″
Bolt Capacity: 1″ (25mm)
Torque Range: 200-800 ft-lb / 271-1085 Nm
Max Torque at 5 seconds: 1200 ft-lb / 1627 Nm
Free Speed: 8500 RPM
Air Requirement: 4.8 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 179mm
Net Weight: 1.7kg
Sound Pressure: 85dBA
Vibration Level: 4.7m/s²(0 reviews) -
Impact WrenchITM M7 Impact Wrench D Handle 3/4″ Drive
Square Drive: 3/4″
Bolt Capacity: 1-1/16″ (27mm)
Torque Range: 200-1400 ft-lb / 271-1898 Nm
Max Torque at 5 seconds: 1500 ft-lb / 2034 Nm
Free Speed: 6000 RPM
Air Requirement: 6.34 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 320mm
Net Weight: 5.7kg
Sound Pressure: 106dBA
Vibration Level: 3.3m/s²(0 reviews) -
Air Operated ToolsITM M7 Impact Wrench Kit 1/4″
Set In carry case.
Rocking Dog Clutch.Kit contains:.
1pc 1/4″ Air Impact Wrench (M7-NC2710).
5pcs Socket : 8, 9, 10, 11, 12mm.
1pc 1/4″ Drive Universal Joint.
1pc 1/4″ 44mm Extension Bar.
1pc Plug (Adaptor)Square Drive: 1/4″
Bolt Capacity: M8
Torque Range: 7.4-29.5 ft-lb / 10-40 Nm
Max Torque at 5 seconds: 29 ft-lb / 40 Nm
Free Speed: 11000 RPM
Air Requirement: 5.3 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 136mm
Net Weight: 0.8kg
Sound Pressure: 91dBA
Vibration Level: 3.4m/s²(0 reviews) -
Impact WrenchITM M7 Mini Impact Wrench 1/2″ Q Series
Jumbo Hammer Type.
Q SeriesSquare Drive: 1/2″
Bolt Capacity: 5/8″ (16mm)
Torque Range: 200-350 ft-lb / 271-475 Nm
Max Torque at 5 seconds: 500 ft-lb / 678 Nm
Free Speed: 9000 RPM
Air Requirement: 4.4 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 115.5mm
Net Weight: 1.6kg
Sound Pressure: 85dBA
Vibration Level: 2.8m/s²(0 reviews) -
Air & Power ToolsITM M7 Needle Scaler 3700BPM
Needle size : 3 x 180mm (19 per set)Stroke Length: 33mm
Blows Per Minute: 3700BPM
Air Requirements: 15 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 330mm
Net Weight: 2.8kg
Sound Pressure: 97 dBA
Vibration Level: 9.7m/s²(0 reviews) -
Air & Power ToolsITM M7 Needle Scaler 5500BPM
Needle size : 3 x 123mm (12 per set).
Great compact design.Stroke Length: 32mm
Blows Per Minute: 5500BPM
Air Requirements: 3 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 290mm
Net Weight: 1.3kg
Sound Pressure: 86 dBA
Vibration Level: 7.67m/s²(0 reviews) -
Air & Power ToolsITM M7 Orbital Sander
Pad Diameter: 150mm (6″)
Free Speed: 10000RPM
Air Requirements: 3.6 CFM / 90 PSI
Inlet: 1/4″
Overall Length: 220mm
Rated Power:0.75HP
Net Weight: 0.91kg
Sound Pressure: 92.5 dBA
Vibration Level: 3.3m/s²
Orbit: 9.5mm(0 reviews) -
Impact WrenchITM M7 Q Series Impact Wrench 3/4″ Drive
Patent grease hole makes greasing process extremely efficient.
The front housing & back head cover are constructed from magnesium alloy. While the rest of the tool is constructed from a durable composite material.
HUGE 1400 FT-LB after 5 seconds in reverse!Square Drive: 3/4″
Bolt Capacity: 1″ (25mm)
Torque Range: 200-1100 ft-lb / 271-1491 Nm
Max Torque at 5 seconds: 1400 ft-lb / 1890 Nm
Free Speed: 8500 RPM
Air Requirement: 4.8 CFM (136 LPM) / 90 PSI / 1/4″ Inlet
Overall Length: 179mm
Net Weight: 1.9kg
Sound Pressure: 85dBA
Vibration Level: 4.5m/s²(0 reviews) -
Air & Power ToolsITM M7 Ratchet Wrench 1/2″ Drive
1/2″ Square Drive Air Ratchet WrenchSquare Drive: 1/2″
Torque Range: 10-55 ft-lb / 13.5-74 Nm
Max Torque at 5 seconds: 100 ft-lb / 135.6 Nm
Free Speed: 160 RPM
Air Requirement: 4 CFM / 90 PSI / 1/4″ Inlet
Overall Length: 280mm
Net Weight: 1.3kg
Sound Pressure: 84dBA
Vibration Level: 4.4m/s²(0 reviews) -
Chemicals, Lubricants & AdhesivesITM Macc Semi-Synthetic Cutting Fluid 5L
Water mix cutting fluid designed for use with most coldsaws, bandsaws, & metal working machinery that use a recirculating coolant system with fluid storage tank.
Resistant to bacterial & fungal growth, extending fluid service life.
Provides an excellent surface finish & extends blade life
Contains corrosion inhibitors to protect machine parts and workpiece
Mix 1 part fluid to 8 parts water(0 reviews) -
VicesITM Mechanics Cast Iron Bench Vice
Rugged all cast iron construction.
Integrated anvil for shaping and beating.
Extra heavy-duty sliding jaw and large diameter screw.
50 ± 5 HRC hardened carbon steel jaws(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
VicesITM Multi Purpose Bench Vice
Superb quality multi purpose bench vice with 360° swivel rotation with safety locking nuts. The body of the vice is reversible with 3 sets of configurations for use with both flat or rounded material. Both the jaws and anvil are tempered to withstand constant industrial use.
Jaw width: 125mm
Jaw opening: 135mm
Pipe holding capacity: 25mm – 65mm(0 reviews) -
Automotive SuppliesITM Outside Micrometer 0-25mm
Enamelled frame.
Ratchet stop and locking screw.
Carbide tipped measuring faces.
Ratchet thimble.
Durable plastic storage case.- Range: 0 – 25mm
- Graduation: 0.01mm
- Accuracy: +/- 0.04mm
- Jaw reach: 29mm
(0 reviews) -
Power ToolsITM Pedestal Floor Drill Press
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Drilling Capacity (mm): 20mm (3/4″)
Spindle Taper: #3MT
Chuck: 5-20mm B22
Motor Power: 750W 240V
Spindle Travel (mm): 85
Speed: 12 Speed 280-2380
Swing (mm): 360
Table Size / Base Size (mm): 290×290 / 460×272
Column Diameter (mm): 80
T-Slot Size: 16mm
Height (mm): 1600
N.W. / G.W. (kg): 64 / 68Drill press vice to suit: VDP102 or VDP150
Cross slide vice to suit: TM130-100(0 reviews) -
GeneratorsITM Petrol Generator 10KVA Construction Series
All ITM generators are equipped with a reliable AVR (automatic voltage regulator) alternator utilising advanced electronic technology to provide a very pure energy supply with a THD (total harmonic distortion) of <5%. This clean and pure output means they are suitable to power even the most delicate electronic devices.
- Powerful 4 Stroke OHV engines
- Low Oil Sensor
- Digital Multimeter Display
- Large Capacity Fuel Tanks
- 2 Year Trade Warranty
The Construction Series models have a simple push button electric start (battery included) with a convenient remote control which is perfect for the large property or worksite where the generator may not be close to the tool being powered.
Complete with a heavy duty handle and wheel kit, IP66 rated power outlets and RCD (Residual Current Device.), the construction series gens are perfect for the professional tradesman needing a tough yet reliable source of power.
- Engine HP: 17HP
- KVA: 10
- Max Watts: 8,000
- Rated Watts: 7,500
- Noise @ 7m Full Load: 80dB
- Outlets: 2 x IP66 15A
- Fuel Tank: 25L
- Running Time – 50% Load: 10 hours
- Starting System: Electric w/ Remote
- Handle & Wheel Kit: Yes
- Frame Dimensions: 69.5cm Long x 54.5cm Wide x 56.5cm High
- Net Weight: 95Kg
(0 reviews) -
AccessoriesITM Pilot Pin – To Suit 25mm Depth
A pilot pin serves three main purposes:.
Ejects the slug at the end of the cut.
Provides coolant feed into the centre of the cutter.
Locates the centre of the cutHOLEMAKER PILOT PIN, 6.34MM x 77MM, TO SUIT 25MM DEPTH OF CUT CUTTERS
Diameter: 6.34mm
Annular Cutter Depth of Cut: 25mm
Overall Length: 77mm(0 reviews) -
Accessories
ITM Pilot Pin – To Suit 50mm Depth
A pilot pin serves three main purposes:.
Ejects the slug at the end of the cut.
Provides coolant feed into the centre of the cutter.
Locates the centre of the cutHOLEMAKER PILOT PIN, 6.34MM x 102MM, TO SUIT 50MM DEPTH OF CUT CUTTERS
Diameter: 6.34mm
Annular Cutter Depth of Cut: 50mm
Overall Length: 102mm(0 reviews) -
INDUSTRIAL TOOLS & MACHINERYITM Precision Engineers Square
Blade Length: 150mm
Stock Length: 100mm
Code: SS/A/6
Straightness of blade edges: 0.00031 inch / 8 microns
Flatness of working faces of stock: 0.00023 inch / 6 microns
Parallelism of working faces of stock: 0.0002 inch / 5 microns(0 reviews) -
Sanding BeltsITM Sanding Belts 80 Grit
For use with PO362
Length : 915mm x 50mm
Abrasive level : Coarse
Grit : 80
Belts per pack : 3(0 reviews)