Shop
Showing 2665–2700 of 5869 results
-
Chemicals, Lubricants & AdhesivesLANOTEC Steel-Seal
USAGE EXAMPLES:
• 4WD and Light Vehicle underbody & chassis rails protection
• Protection of jet skis, trailers and all marine motors
• Sea preparation
• Chemical storage facilities and equipment protection
• Agricultural vehicles including boom sprayers & fertiliser spreaders
• Drill pipe protection including threads & internal casings
• Electrical component protection – non conductive to 41kV(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Timber Seal
• For dressed timber including decking, outdoor furniture, fencing,
gates, and cladding
•Prevention of drying, cracking, splitting & wood rot
• For weatherproofing end grains & checkouts
• Corrosion protection of metal fastenings & fittings
• Light lubricant for locks and hinges(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Timber Seal PLUS
• For rough sawn timber including boardwalks, bridges,
jetties, wharf infrastructure, fence posts & railings
• Prevention of drying, cracking, splitting & wood rot
• For weatherproofing and highlighting natural grain
• For a natural matte finish
• Corrosion protection of metal fastenings & fittings(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Type ‘A Grease & Soft Grease
• Anti-seize, anti-galling
• Assembly lubricant & rubber grease
• Protects electrical components from moisture including
connectors – multi pin plugs
• Prevents galling of stainless steel and aluminium
• Stops electrolysis due to dissimilar metals
• Ideal anti-seize for non grease-able pins (lanolin never dries out).
• Belt dressing
• Metal to metal soft seal gasket
• Drilling & cutting aid
• Welding nozzle dip – non flammable(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesLANOTEC Wire Rope Lube
• Suitable for all wire ropes above 16mm or any wire ropes operating in corrosive environments
• Ideal for rig and marine cranes, or any wire ropes working in the splash zone
• Ideal for use around waterways and coastal environments
• Lubrication of ropes in environmentally sensitive areas where salt water is an issue
• Ideal for use on industrial high load bearing chains(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Log BooksLarge Excavator Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Diesel HeatersLAVOR FF175 Diesel Heater
The FF175 Fan Forced Space Diesel Heater produces 175,000 BTU or 51.3KW of heat. The unit requires 240v power to run the fan and the spark transformer.
This forced air heater has a thermostat control where one can set the unit to run up to a predetermined temperature. When the air temperature reaches this level, the heater automatically shuts off. Equally when the temperature drops below the thermostat setting, the heater automatically turns back on. Along with the thermostat, the diesel heater has a digital display showing the ambient air temperature.
The heater has a 49 litre fuel tank allowing for a runtime of approximately 10 hours. Kerosine can also be used as fuel for this heater.
(0 reviews) -
Diesel HeatersLAVOR FF70 Diesel Heater
The FF70 Fan Forced Diesel Space Heater produces 70,000 BTU or 21KW of heat. The heater requires 240V power to run the fan and the spark transformer.
This diesel heater has a 19 litre tank allowing for a runtime of up to 9 hours. Weighing only 12 kgs empty and approximately 30 kgs with a full fuel load, the heater is relatively portable and lightweight.
The unit has a thermostat control where one can set the unit to run up to a predetermined temperature and when the ambient air temperature reaches this level, the heater automatically shuts off. Equally when the temperature drops below the preset setting, the heater turns back on.
(0 reviews) -
Diesel HeatersLAVOR PT125SS Diesel Heater
The PT125SS Radiant Space Diesel Heater produces 125,000 BTU or 37KW of heat. The diesel heater has a 56 litre fuel tank allowing the unit a runtime of around 17 hours. Additionally, kerosine is an alternative fuel which can be used on this heater.
This radiant diesel heater also offers a gentle fan forced airflow. Consequently, this is a very low noise alternative to the high noise fan forced heating process.
A thermostat control with a digital ambient air temperature display allows for precise control over the heat generated for this unit. The heater weighs 38kgs while empty, but with a full tank a fuel can be quite cumbersome. While this unit has wheels for portability, it is generally a “leave in one place” type heater.
(0 reviews) -
Diesel HeatersLAVOR PT70SSPlus Diesel Heater
The PT70SSPlus Diesel Heater is a quiet alternative to what has been the more traditional Fan Forced Diesel space heaters. The machine has a very gentle and quiet fan. Consequently, the fan operates to disperse the heat on the front face of the unit.
With fuel consumption of only 1.9 l/h, the 15 litre fuel tank gives a run time of approximately 7 hours. In addition, this is now further assisted by a Thermostat control on the heater. As a result, the digital display shows the current ambient air temperature.
The unit can also run on Kerosine fuel for a cleaner and hotter burn.
Please note: The video shown in the VIDEO tab is the older PT70SS model. That particular model is very similar except it had a 12 litre fuel tank, 6 hours run time and no thermostat control.
(0 reviews) -
Accessories & PartsLINQ Ladder Braq-It
- The LINQ Ladder Gutter BRAQ-IT has multi-positional slide brackets to fit most rung ladders.
- The LINQ fit and forget design becomes integral to the ladder it is attached to.
- Comes with I.D plate with Batch and Date of Manufacture for ease of traceability.
- Durable powder coated finish.
- Fit and forget attachment once adjusted into place.
- Seamlessly integrates into most ladder rungs, providing enduring support.
- Protects gutter profile with integrated rubber lining.
- Adjustable wing and clamp makes it versatile to use on most ladders.
- Ensures safety of user on and off the ladder.
- AUS/NZ Designed and Engineered
- Adjusts up to 475mm wide.
(0 reviews) -
Disinfectants & Air FreshenersLittle Trees Fiber Can Air Freshener
Freshen your life with the world-famous LITTLE TREES air fresheners. Like all of their fragrances, it’s high quality, strong, and long-lasting. At home or on the road, let LITTLE TREES freshen your life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Repair KitsLOKSERT Carbon Steel Heavy Duty Repair Kit Metric Coarse
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- They are constructed from high quality carbon steel or extremely hard wearing stainless steel.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Repair Kits
LOKSERT Carbon Steel Heavy Duty Repair Kit Metric Fine
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- They are constructed from high quality carbon steel or extremely hard wearing stainless steel.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Repair Kits
LOKSERT Carbon Steel Heavy Duty Repair Kit UNC
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- They are constructed from high quality carbon steel or extremely hard wearing stainless steel.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Repair Kits
LOKSERT Carbon Steel Heavy Duty Repair Kit UNF
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- They are constructed from high quality carbon steel or extremely hard wearing stainless steel.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Repair Kits
LOKSERT Carbon Steel Thin Wall Repair Kit Metric Coarse
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- They are constructed from high quality carbon steel or extremely hard wearing stainless steel.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Repair Kits
LOKSERT Carbon Steel Thin Wall Repair Kit Metric Fine
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- They are constructed from high quality carbon steel or extremely hard wearing stainless steel.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Repair Kits
LOKSERT Carbon Steel Thin Wall Repair Kit UNC
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- They are constructed from high quality carbon steel or extremely hard wearing stainless steel.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Repair Kits
LOKSERT Carbon Steel Thin Wall Repair Kit UNF
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- They are constructed from high quality carbon steel or extremely hard wearing stainless steel.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsLOKSERT HSS Drills Metric Coarse & Metric Fine Heavy Duty
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
LOKSERT HSS Drills UNC & UNF Heavy Duty
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
TapsLOKSERT HSS Taps Metric Coarse & Metric Fine Heavy Duty
Intermediate Tap for Metric Coarse & Metric Fine Lokserts
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps
LOKSERT HSS Taps UNC & UNF Heavy Duty
Intermediate Tap for UNC & UNF Lokserts
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
InsertsLOKSERT Key Locking Carbon Steel Extra Heavy Duty Inserts UNJC
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Extra Heavy Duty Inserts UNJF
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.LOKSERT Key Locking Carbon Steel Thin Wall Inserts
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Heavy Duty Inserts Metric Coarse
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Heavy Duty Inserts Metric Fine
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.LOKSERT Key Locking Carbon Steel Thin Wall Inserts
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Heavy Duty Inserts UNJC
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Heavy Duty Inserts UNJF
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.LOKSERT Key Locking Carbon Steel Thin Wall Inserts
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Solid Metric
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Solid UN
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Thin Wall Inserts Metric Coarse
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Thin Wall Inserts Metric Fine
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.LOKSERT Key Locking Carbon Steel Thin Wall Inserts
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Thin Wall Inserts UNJC
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Inserts
LOKSERT Key Locking Carbon Steel Thin Wall Inserts UNJF
- Loksert keylocking inserts are an easily installed thread assembly that is ideal for replacing damaged or worn threads in virtually any material – ferrous, non-ferrous, and non-metallic.
- One piece Loksert inserts are supplied with the dove-tailed locking keys pre-assembled.
- The pre-positioned keys automatically position the insert at the correct depth below the surface of the parent material.
- Lokserts are suitable for repairing and creating threads in a wide range of applications including forgings and castings and are especially suited to situations that experience heavy wear and vibrations – such as mining, construction and earthmoving equipment.
- Solid bushing utilising locking keys provides positive mechanical lock against rotation.
- High strength and reliability provides maximum pullout strength.
- Installed using standard drills and taps.
- Simple installation; no special skills required.
- Suitable for use in a wide range of parent materials.
- Impossible to cross thread during installation.
- Simple removal process if required.
- No tang to break and remove.
- Available in metric sizes and inch sizes.
- Available in Miniature, Thinwall, Heavy Duty, Extra Heavy Duty and Solid versions.LOKSERT Key Locking Carbon Steel Thin Wall Inserts
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
