Shop
Showing 1477–1512 of 6450 results
-
Chemicals, Lubricants & AdhesivesCRC Surface Sanitiser Spray
DESCRIPTION
CRC Surface Sanitiser Spray is an Alcohol-Based sanitiser suitable for almost all surfaces. It is effective against bacteria, fungi and viruses. Especially suitable for surfaces susceptible to corrosion from water based products. Ideal for hard non-porous surfaces such as metal surfaces, stainless steel surfaces, porcelain and plastic surfaces. Effective against coronavirus strains from the same family as the 2019 Novel Coronavirus (COVID-19).Applications
Shake well before use. Hold can 15-20cm from pre-cleaned surface and spray surface until covered with mist. Allow to air dry. No need to wipe.
Features/Benefits:
Starts working on contact Multi surface protection Ready to use in aerosol form Pleasant Fragrance Contains 70% Isopropyl Alcohol Effective against corona virus strains from the same family as the 2019 Novel Corona virus (COVID-19).
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC TAC-2 Non-Flammable
DESCRIPTION
CRC TAC-2 Non-Flammable (NF) forms a strong bond with surfaces, minimizing run off and offering long-term lubrication and corrosion prevention.
CRC TAC-2 NF is resistant to washout and can withstand high temperature without ignition.
Applications
Recommended for all types of chain drives, open gears, car wash equipment, bottling plant, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks, wire ropes and marine applications.
Features/Benefits:
Ideal for mining and areas with low ventilation. Non-conductive and Non-corrosive ensuring safety during use. Ideal for situations and environments where flammable vapours may become ignited and cause fire.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC TAC2 Adhesive Lubricant
DESCRIPTION
CRC TAC2 is a tough adhesive lubricant that bonds to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that lead to metal fatigue.Applications
Recommended for all types of chain drives, open gears, car wash equipment, bottling plant, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks, wire ropes and marine applications.
Features/Benefits:
Resists cold, hot and salt water wash off and high temperature sling off. Reduces wear and friction. Lubricates effectively chain drives, open gears, pulleys, wire ropes, conveyors. Penetrates vital chain pin and bushing areas and wire rope strands.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Tackle GUARD
DESCRIPTION
CRC Tackle GUARD is a specifically formulated for the use on all tackle. CRC Tackle GUARD is ideal for protecting and lubricating whilst with its superior penetrating power drives out moisture leaving a long lasting film that will not dry out. Protects all types of fresh and salt water reels without damaging monofilament, EVA grips and seals against corrosion.Applications
Recommended to penetrate driving out moisture and leaving a long lasting film, as part of preventative maintenance programs and as an environmental shield
Features/Benefits:
Moisture eliminator for wet equipment. Creates a moisture barrier to prevent trouble before it starts. Protective film seals out moisture. Lubricant which will give lubrication where it penetrates, restoring smooth action and silencing annoying squeaks.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Throttle Body & Air Intake Cleaner
DESCRIPTION
Regular cleaning with CRC Throttle Body & Air Intake Cleaner restores engine performance, improves fuel economy and reduces engine wear.Applications
Recommended to remove harmful deposits from throttle bodies and air intake systems in fuel injected vehicles
Features/Benefits:
Removes and prevents build-up of harmful throttle body deposits. Restores engine performance. Improves fuel economy. Reduces engine wear. Safe on coatings, sensors, O-ring seals and other sensitive components. Lubricates and protects moving parts. 360° Valve, ensures that all usable product is expelled from can.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Trefolex Cutting Fluid
DESCRIPTION
Trefolex HD Cutting Fluid is an extreme duty cutting fluid. It is a thick fluid that sticks to the cutting tool throughout the operation. Considered environmentally safe.Applications
Recommended for tapping & drilling stainless steel, carbon steel, inconel, monel, hastelloy, titanium, aluminium and other alloys and exotics
Features/Benefits:
Extreme duty cutting fluid. Thick fluid that sticks to the cutting tool throughout the operation. Considered environmentally safe.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Trefolex Cutting Oil
DESCRIPTION
Trefolex CDT Cutting Oil is a superior cutting, drilling and tread cutting lubricant for the use on all types of metal. Additives create a strong film that can withstand extreme pressure to increase tool life and improves cutting, and with a viscosity modifier increases ‘cling’ for use at any angle. The low odour formula is safe on soft metals such as brass, copper and aluminium.Applications
Recommended for cutting, drilling, tread cutting and the critical machining of non-ferrous metals, for all operations in Machinability Group 2
Features/Benefits:
Superior lubricant. Extreme pressure resistant – increases tool life and improves cutting. Viscosity modifier – allows work at any angle due to increased ‘cling’. Soft metal safe – formula safe on soft metals such as brass, copper and aluminium.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Trefolex Cutting Paste
Trefolex Cutting Paste is a green coloured, active cutting compound containing a colloid. It melts slowly as frictional heat is generated. It maintains efficient lubrication throughout operations such as pipe screwing, hack sawing, tapping and reaming. It is suitable for all users of hand tools. Trefolex Cutting Paste prolongs the life of the tool. It will not corrode steel nor affect aluminium. Although the surface of copper and brass is darkened, the metal suffers no detrimental effect. It is ideal for use with stainless steel.
Recommended for use with taps and dies, hacksaws, reamers, all hand tools and in low speed cutting operations only
Prolongs the life of the tool. Will not corrode steel nor affect aluminium. Ideal for use with stainless steel. Available in handy, convenient tube size.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCRC Ultra High Strength Aerosol Adhesive
DESCRIPTION
CRC UHS is an ultra high strength contact adhesive which gives an immediate and permanent bond on a wide variety of surfaces. It is formulated to give low soak, cure fast, dry clear and be non-staining. It has high heat resistance and is suitable on porous and non-porous surfaces making it ideal for a wide variety of applications, where permanent, high strength bonds are essential. CRC UHS uses a unique resin system making it resistant to breakdown from plasticiser migration. The UHS aerosol is fitted with a variable nozzle, which allows controlled, accurate spraying, reducing product wastage and limiting over-spray.Applications
Spray an even layer of adhesive to both surfaces. Adjust nozzle for width of spray required. Allow solvents to evaporate away. Between 5-10 minutes, the solvent should have evaporated and the adhesive should be tacky enough to bond the surfaces together. A useful indication is to touch the surfaces (all over) with a clean finger: if they are sticky to the touch, without transferring to your finger, they are ready to bond together. On non porous surfaces it is imperative that no solvent is trapped. Position components accurately, as when contact is made, the bond will be immediate. Apply maximum overall instant pressure, taking care to expel any air bubbles, to ensure a complete bond. Use of a hand pressure roller, e.g. a vinyl-flooring roller, provides good direct pressure. A dry adhesive surface may be reactivated by wiping over with solvent.
Features/Benefits:
Ultra High Strength – Instant Permanent Contact Bond High Heat Resistance – Up to 75°C Plasticiser Safe – Resistant to breakdown from plasticiser migration Easy to Use – No clamping required Variable Nozzle – Allows controlled, accurate spraying and a variable spray width
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC WattsUp Solar Panel Cleaner
DESCRIPTION
CRC WattsUp Solar Panel Cleaner effectively removes contaminants from solar panels. maximising power generation. It is formulated to remove pollen, pollution, bird droppings, dust, dirt, salt spray and more, leaving a spot free finish.
CRC WattsUp Solar Panel Cleaner is non-corrosive and contains no solvents, making it safe for the user and the environment.
Applications
CRC WattsUp Solar Panel Cleaner is non-corrosive and contains no solvents which is an excellent choice for effectively cleaning solar panels in commercial, industrial, and solar farm settings.
For optimal results, follow the usage instructions.
Inspect entire system prior to cleaning to check for loose or broken wires and panels. Always clean panels early in the morning or at night when panels are cool.
- Step 1: Recommended dilution rate is 1 part CRC WattsUp Solar Panel Cleaner with 30 parts waters (1:30). For heavily soiled areas use a higher concentration.
- Step 2: Rinse panels with CRC WattsUp Solar Panel Cleaner, removing loose debris. Only wet number of panels that can be brushed and rinsed before solution dries.
- Step 3: Wash panels with non-abrasive cleaning equipment, i.e., sponge, lint free cloth.
- Step 4: Repeat steps 1 and 2 as needed for heavy contamination.
- Step 5: Rinse panels with CRC WattsUp Solar Panel Cleaner or with water and let it dry.
Panels can be dried with a microfibre cloth for glass if desired.
Features/Benefits:
- Restores solar cells efficiency to maximise solar panel output
- Effectively removes bird droppings, dust, dirt, salt spray, and more
- Anti-static properties keep panels clean for longer
- Easy to use – once diluted, it can be sprayed through a commercial spray applicator followed by rinsing with water
- Non-corrosive and contains no solvent – safe for aluminium frames
- Concentrate Formula – 1 part CRC WattsUp Cleaner with 30 parts water (1:30)
- 1L: Makes up to 31L – Cleans up to 125 panels or 204sqm
Result may vary depending on conditions, levels of contamination and dilution rates.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCRC White Lithium Grease
DESCRIPTION
CRC WHITE LITHIUM GREASE is an advanced lubricant and protectant containing an advanced additive package for superior performance and durability in any weather and most temperatures. This versatile grease is designed for light duty applications requiring a long grease life. CRC WHITE LITHIUM GREASE contains oxidation inhibitors to counter corrosion, and protects with a tough, high viscosity film.Applications
Recommended to lubricate hinges, latches, overhead door tracks, open gears & chains, cables, slide conveyors, guide rails, cams & pistons, as a break-in lubrication for bearings Recommended for general purpose lubrication and corrosion protection
Features/Benefits:
Heat and water resistant. Provides lasting lubrication and durability under stressful conditions. Rust & oxidation inhibitors. For superior metal protection. High purity, white lithium based grease. Non-conductive. SDS available.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC White Zinc
DESCRIPTION
CRC White Zincs unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a coloured satin finish in recognised safety colours. High levels of anti-corrosive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent adhesion to bare metal. CRC White Zinc provides a satin top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion by forming an effective corrosion barrier. For ultimate protection, prime the metal surface with CRC Zinc It prior to applying CRC White Zinc. To achieve a high film build, use CRC Prep It as an intermediate coat if required. Ongoing protection can be achieved through simple re-coating within 3 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.Applications
Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply a number of thin coats with smooth even strokes to clean, dry surface holding can approximately 25cm from surface. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
Features/Benefits:
Zinc enriched for corrosion protection – High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating Satin finish – Available in seven colours. Safety – Colours conform to British Safety Colour standards. Excellent adhesive qualities – Forms a tough coat for long-term protection. Heat Resistance – Up to 120°C. Corrosion protection – Corrosion Protection Factor 36 (up to 3 years before recoating is necessary, depending on conditions). Fast drying – Touch dry in 20 minutes, recoat within 30 minutes, full cure in 24 hours. Easy re-application over existing film and/or clean surfaces – For ongoing protection. Single coat – No over coating required.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Wire Rope and Cable Lubricant
DESCRIPTION
CRC Wire Rope and Cable Lubricant is a special blend of synthetic lubricants, solvents and Molybdenum designed to keep chains and wire rope in peak operating condition. With a low viscosity and wet film, CRC Wire Rope and Cable Lubricant penetrates deeply between chain links and wire strands to reduce friction and wear that cause metal fatigue. CRC Wire Rope and Cable Lubricant also contains a tackifier that enables the lubricant to cling tenaciously to metal surfaces without increasing the viscosity. Regular use of CRC Wire Rope and Cable Lubricant will help inhibit corrosion, reduce load stress and prevent wire strands from becoming brittle and fraying.Applications
Recommended for use as a lubricant and corrosion inhibitor on low speed conveyor & drive chains, hoists, winches, pulleys, cushion pins, rollers, garage doors, bushings, seals, O-rings, and come alongs
Features/Benefits:
Low viscosity provides the ability to penetrate and thoroughly coat interior wire strands and cushion pins. Contains Molybdenum which has cling ability to avoid sling off or excess dripping, and prevents lubricant from pooling at lower ends.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Yellow Zinc
DESCRIPTION
CRC Yellow Zincs unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a coloured satin finish in recognised safety colours. High levels of anti-corrosive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent adhesion to bare metal. CRC Yellow Zinc provides a satin top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion by forming an effective corrosion barrier. For ultimate protection, prime the metal surface with CRC Zinc It prior to applying CRC Yellow Zinc. To achieve a high film build, use CRC Prep It as an intermediate coat if required. Ongoing protection can be achieved through simple re-coating within 3 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.Applications
Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply a number of thin coats with smooth even strokes to clean, dry surface holding can approximately 25cm from surface. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
Features/Benefits:
Zinc enriched for corrosion protection – High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating Satin finish – Available in seven colours. Safety – Colours conform to British Safety Colour standards. Excellent adhesive qualities – Forms a tough coat for long-term protection. Heat Resistance – Up to 120°C. Corrosion protection – Corrosion Protection Factor 36 (up to 3 years before recoating is necessary, depending on conditions). Fast drying – Touch dry in 20 minutes, recoat within 30 minutes, full cure in 24 hours. Easy re-application over existing film and/or clean surfaces – For ongoing protection. Single coat – No over coating required.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Zinc It
CRC ZINC IT is a single component zinc rich compound with a special epoxy binder and contains 95% of the highest purity zinc in the dried film, to give galvanic rust prevention.
Recommended for use on structural steel, trailers, roofs, guard rails, welding seams, rivet holes, fencing, storage tank transformers, power generation equipment, off shore oil rigs, ships, railroad equipment, substation equipment, transmission towers, touch up over galvanized coatings, coastal and ship borne installations subject to severe salt water and salt spray corrosion.
Easy to apply – aerosol only. Long term protection to steel because of cathodic action. Metallic zinc coating is universally accepted as the best method of rust prevention. Flexible continuous protective film. Does not contain lead. Excellent weldability.
(0 reviews) -
DebirillatorsDefibrillator (AED) HeartSine Samaritan 360P
The HeartSine Samaritan 360P Defibrillator is a Fully-Automatic defibrillator (AED) that analyzes the heart rhythm and delivers an electrical shock to victims of Sudden Cardiac Arrest in order to restore the heart to normal rhythm. User-friendly and provides Easy to understand visual and voice prompts guide the rescuer through the entire resuscitation process. This model doers not include CPR Advisor Technology, this is only included in the 500p model. (See video below for how it works)
Features:
- 12 months Subscription to Safety On (Professional Plan) – including Installation, Maintenance and How to Use Videos – valued at $240
- 8 Year Warranty
- Auto-Automatic Shock Delivery (eliminating the need for the rescuer to push a shock button)
- Easy to Follow Visual and Verbal Guides
- Portable & Lightweight
- High level Production from Dust & Water (IP56 Rating)
- Suitable for use on Adults & Children. (Adult pads included, Child Pads (PDPK04) can be purchased Separately)
- Maintenance Free
- Cost Effective to Run
- Event Recording
- TGA Approved (ARTG 228210)
Usage
The 360P is suitable for use on adults and children. Adult Pad Pak is included.
For children younger than 8 years or weighing less than 25 kg (55 lbs), a Pediatric-Pak is required and can be purchased separately. Fully automatic the 360p model detects motion or other significant interference to reduce the likelihood that the user is touching the patient prior to shock delivery.Battery & Pad-Pack
The 360P uses HeartSine’s Pad-Pak, which incorporates the battery and electrodes in a single-use cartridge – meaning only one expiration date to monitor and only one item to replace after use.
Each Pad-Pak has a shelf life of 4 years from date of manufacture and provides 60 shocks or six hours of continuous monitoring.
When battery power is down to ten shocks or less, the 360p AED will emit an audible beep to alert it needs to be replaced.Clinically validated technology
The HeartSine Samaritan PAD utilizes proprietary electrode technology and SCOPE™ biphasic technology, a low energy escalating waveform, that automatically adjusts for differences in patient impedance.Always ready
A System Status Ready Indicator flashes to show that the complete system is operational and ready for use. The device automatically runs a self-check each week.Low cost of ownership
With a shelf life of four years from date of manufacture, the Pad-Pak offers significant savings over other defibrillators that require separate battery and electrode replacements.
PADPAK replacement is a low cost every 4 years approx or after use.(0 reviews) - 12 months Subscription to Safety On (Professional Plan) – including Installation, Maintenance and How to Use Videos – valued at $240
-
DebirillatorsDefibrillator (AED) HeartSine Samaritan 500P
The HeartSine Samaritan 500P Defibrillator is a Semi-Automatic Public Access Defibrillator (AED) with Integrated CPR Advisor that analyzes the heart rhythm and delivers an electrical shock to victims of Sudden Cardiac Arrest in order to restore the heart to normal rhythm. User-friendly and provides Easy to understand visual and voice prompts guide the rescuer through the entire resuscitation process. This is the Defib that saved a wiggle. (See video below for how it works).
CPR Advisor – Real Time CPR Feedback (Best Technology Available to save a life)
- CPR Advisor provides feedback to rescuers on the effectiveness of the CPR they are providing to the victim.
- The 500p model uses both ECG & ICG measurements to analyse the effectiveness and the rate of compressions given and based on this will advise the rescuer to push harder, faster or slower as appropriate.
- Feedback on the quality of the compressions being given is provided to the responder by means of both audible and visual prompts.
- Good quality CPR is vital part of the resuscitation process, By performing CPR you are manually restoring blood circulation and oxygen to the Body/Brain. This is critical !!!
- Only Available with the 500p model. (See video below for how it works)
Features:
- 12 months Subscription to Safety On (Professional Plan) – including Installation, Maintenance and How to Use Videos – valued at $240
- 8 Year Warranty
- CPR Advisor Technology
- Semi-Automatic Shock Delivery (allowing the rescuer to push the shock button)
- Easy to Follow Visual and Verbal Guides
- Portable & Lightweight
- High level Production from Dust & Water (IP56 Rating)
- Suitable for use on Adults & Children. (Adult pads included, Child Pads (PDPK04) can be purchased Separately)
- Maintenance Free
- Cost Effective to Run
- Event Recording
- TGA Approved (ARTG 228210)
Usage
The 500P is suitable for use on adults and children. Adult Pad Pak is included.
For children younger than 8 years or weighing less than 25 kg (55 lbs), a Pediatric-Pak is required and can be purchased separately.Battery & Pad-Pack
The 500P uses HeartSine’s Pad-Pak, which incorporates the battery and electrodes in a single-use cartridge – meaning only one expiration date to monitor and only one item to replace after use.
Each Pad-Pak has a shelf life of 4 years from date of manufacture and provides 60 shocks or six hours of continuous monitoring.
When battery power is down to ten shocks or less, the 500P AED will emit an audible beep to alert it needs to be replaced.Clinically validated technology
The HeartSine Samaritan PAD utilizes proprietary electrode technology and SCOPE™ biphasic technology, a low energy escalating waveform, that automatically adjusts for differences in patient impedance.Always ready
A System Status Ready Indicator flashes to show that the complete system is operational and ready for use. The device automatically runs a self-check each week.Low cost of ownership
With a shelf life of four years from date of manufacture, the Pad-Pak offers significant savings over other defibrillators that require separate battery and electrode replacements.
PADPAK replacement is a low cost every 4 years approx or after use.(0 reviews) -
Log BooksDemountable Bin Truck Safety Check Logbook
A4 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Diesel Powered Welding Equipment Safety Check Logbook
A4 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Disabled Hoist Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Jackets & RainwearDNC Hi-Vis Lightweight Rain Pants
DNC Hi-Vis Lightweight Rain Pants 3880
Sizes: S – 6XL
Colours: Orange/Navy, Yellow/Navy
- SUN Protection UPF 40+ – 50+ DNC garments are tested for UPF (ultraviolet protection factor) in accordance with AS/NZS4399:1996. The level of protection varies depending on the fabric and colour of the garment. 15+ good protection, 30+ / 35+ very good protection, 40+ / 50+ excellent protection.
- Environmentally Friendly Green Dye Oeko-Tex Standard 100 Safe to wear against the skin All DNC garments use the Green Dye only, except for the Patrol Saint Flame Retardant range. All DNC garment fabric fully complies with Oeko-Tex standard 100 class II for products with direct contact to the skin in which prohibited to use aromatic amines, sensitizing dyes and cancer risk dyes. Green dye should meet the following conditions: Does not contain harmful or non-aromatic amine; dye itself, non[1]carcinogenic, sensitization, acute toxicity; the use of formaldehyde and, after extraction of heavy metals in the following limits; non-environmental hormone; non persistent organic pollutants; does not produce pollution of the environment harmful chemicals; not produce chemicals that pollute the environment; colour fastness and superior to disable the use of dyes.
- Waterproof DNC Rainwear and HiVis Jackets are made of a polyester outer, PU coated inner and all seam sealed 100% waterproof.
- HiVis Day Fabric & Design New AS/NZS 4602.1:2011 DNC HiVis garments are manufactured to comply with New Hi Vis standard Class F AS/NZS1906.4:2010, Class D AS/NZS 4602.1:2011 to meet the requirements of Hi-Vis safety standards for both HiVis Fabric & Design of garments, (Section 6.4) day use.
- Lightweight DNC provide entire ranges of lightweight fabrics as an alternate to regular weight garments. Features include quicker drying, breathable and a more comfortable light weight feel.
- CSR Reflective Tape Alternatively DNC also use premium quality Reflective Tape for the value hi-vis range. CSR Reflective tape fully complies with AS/NZS1906.4:2010 for Hi Vis material. Home wash 50 Cycles @ 60° C
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Copy Paper, Sticky Notes & TabsDouble A A3 Copy Paper 80gsm
Double A
A3 Copy Paper 80gsm
5 x 500pk ream
(0 reviews) -
Copy Paper, Sticky Notes & Tabs
Double A A4 Copy Paper 80gsm
Double A
A4 Copy Paper 80gsm
5 x 500pk ream
(0 reviews) -
Copy Paper, Sticky Notes & Tabs
Double A A5 Copy Paper 80gsm
Double A
A5 Copy Paper 80gsm
5 x 500pk ream
(0 reviews) -
Log Books
Drain Cleaning Truck Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Machines & KitsDURALLOY 10 Amp Multiprocess Inverter Welding Machine
SPECIFICATIONS
Power Supply 240V
Supply Plug 10 Amp
Frequency 50/60Hz
240V ± 10%
MIG MMA TIG
Input Current 24/10A 30/10A 32/10A
Duty Cycle
40o
C 10min
160A 15%
80A 60%
62A 100%
140A 25%
100A 60%
80A 100%
160A 35%
100A 60%
90A 100%
No Load Voltage 54V
Welding Current 10 – 175A
Welding Voltage 14V – 24V
Efficiency 80%
Power Factor 0.76
Wire Diameter Fe: 0.6 – 0.9 Ss: 0.8/0.9
Flux-Cored: 0.8 – 0.9 AL: 1.0
Net Weight 10kg
Dimensions 490mm x 230mm x 390mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 10A MIG/Stick Inverter Welding Machine
SPECIFICATIONS
Power Supply 240V
Supply Plug 10 Amp
Frequency 50/60Hz
240V ± 10%
MIG MMA
Input Current 24/10A 30/10A
Duty Cycle
40o
C 10min
140A 15%
80A 60%
62A 100%
140A 25%
100A 60%
80A 100%
No Load Voltage 52V
Welding Current 10 – 140A
Welding Voltage 15 – 23V
Efficiency 85%
Power Factor 0.76
Wire Diameter Fe: 0.6 – 0.8 Ss: 0.8
Flux-Cored: 0.8 – 0.9
Net Weight 8.2kg
Dimensions 430mm x 150mm x 290mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 15 Amp 240V Multiprocess Inverter Pulse MIG Welding Machine
SPECIFICATIONS
Power Supply 240V
Supply Plug 15 Amp
Frequency 50/60Hz
240V ± 10%
MIG MMA TIG
Input Current 31/12A 36/14A 23/11A
Duty Cycle
40o
C 10min
180A 15%
90A 60%
70A 100%
180A 15%
90A 60%
70A 100%
180A 25%
116A 60%
90A 100%
No Load Voltage 64V
Welding Current 30A – 180A
Welding Voltage 15.5V – 23V
Efficiency 77%
Power Factor 0.73
Wire Diameter Fe: 0.8 – 0.9
SS: 0.8-0.9
Flux-Cored: 0.8 -0.9
AL: 1.0 -1.2
Net Weight 12.2kg
Dimensions 520mm x 215mm x 385mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & Kits
DURALLOY 15 Amp Multiprocess Inverter Welding Machine
SPECIFICATIONS
Power Supply 240V
Supply Plug 15 Amp
Frequency 50/60Hz
240V ± 10%
MIG MMA TIG
Input Current 32/15A 32/15A 32/15A
Duty Cycle
40o
C 10min
200A 20%
115A 60%
89A 100%
200A 25%
140A 60%
100A 100%
200A 35%
140A 60%
100A 100%
No Load Voltage 54V
Welding Current 50A – 200A
Welding Voltage 16.5V – 24V
Efficiency 80%
Power Factor 0.76
Wire Diameter Fe: 0.6 – 0.9 Ss: 0.8/0.9
Flux-Cored: 0.8 – 1.2 AL: 1.0
Net Weight 10kg
Dimensions 490mm x 230mm x 390mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 240V 140 AMP Portable MMA Inverter Welder
PORTABLE
The machine weighs just 2kg ensuring ease
of portability.
DIGITAL DISPLAY
Variable amperage control with digital meter.
PROTECTIONS
Equipped with temperature, voltage and
current sensors for greater protection.
FEATURES
• Highly portable
• 10 Amp primary plug
• IP21S rating
• Arc Force, Hot Start, Anti Stick & VRD all
built-in
• MMA & LIFT TIG functions
• Exceptional smooth Arc characteristics
SPECIFICATIONS
Power Supply 1-240kW ± 10%
Supply Plug 10 Amps
Frequency 50/60Hz
Input Current 30/10 Amps
Duty Cycle
40o
C 10min
140A @ 10%
58A @ 60%
45A @ 100%
No Load Voltage 64V
Welding Current 10 – 140A
Efficiency ≥ 85%
Net Weight 2kg
Dimensions 225mm x 95mm x 130mm
Protection Class IP21S
Insulation Class H
Cooling Fan
Electrode Diameter Ø1.6 – Ø3.2
Electrode Type 6013, 7018, etc.
Power Factor 0.76
APPLICATIONS
• Home or farm use
• Portable on-site
maintenance
• DIY
MATERIALS
• Mild Steel
• Stainless Steel
PACKAGE INCLUDES
• Power Source
• MMA Earth Lead & Clamp
• MMA Arc Lead & Holder
• Owner’s Manual(0 reviews) -
Machines & KitsDURALLOY 240V 180Amp Portable MMA Inverter Welder
SPECIFICATIONS
Power Supply 240V
Supply Plug 15 Amps
Frequency 50/60Hz
Input Power 5.8kW
Input Current 15A/34A
Duty Cycle
40o
C 10min
180A 20%
104A 60%
80A 100%
No Load Voltage 80V
Welding Current 10 – 180A
Efficiency ≥ 85%
Net Weight 3.5kg
Dimensions 265mm x 120mm x 218mm
Protection Class IP23
Insulation Class F
Cooling Auto Fan
Electrode Diameter Ø1.6 – Ø4.0
Electrode Type 6013, 7018, etc.
Power Factor 0.76(0 reviews) -
Machines & KitsDURALLOY 240v AC/DC TIG Inverter Welding machine
SPECIFICATIONS
Power Supply 240V
Frequency 50/60Hz
AC TIG DC TIG
Input Current 37A
Welding Current
HF LIFT DC
10 – 200A 30 – 200A 10 – 200A
Duty Cycle
40o
C 10min
10% 200A
60% 82A
100% 63A
10% 180A
60% 73A
100% 57A
Max. No Load Voltage 78V
Down Slope 0 – 5 S
Post Flow 1 -10 S
AC Frequency 60 HZ
Net Weight 8kg
Dimensions 475mm x 185mm x325mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 240v AC/DC TIG Inverter Welding machine
SPECIFICATIONS
Power Supply 1-220/230/240 ± 10%
Frequency 50/60Hz
AC TIG DC TIG MMA
Input Power 4.3kW 3.8kW 5.7kW
Input Current 15/30A 15/27A 15/41A
Duty Cycle
40o
C 10min
200A 30%
155A 60%
120A 100%
170A 30%
140A 60%
110A 100%
No Load Voltage 52 V
Welding Current 10A – 200A 10A – 170A
Down Slope 0 – 10 S
Post Flow 1 -10 S
Pulse Frequency 0.5 – 100 HZ
AC Frequency 60 HZ
Pulse Width Range 5 – 95 %
Efficiency > 85%
Net Weight 9.2kg
Dimensions 410mm x 146mm x 278mm
Insulation Class H
Protection Class IP23
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 240V Inverter Plasma Cutter
SPECIFICATIONS
Power Supply 240V±10%
Supply Plug 10 Amps
Rated Input Current 22A
No-Load Voltage 310V
Current Range 20-30A
Rated Output Voltage 88-96
Duty Cycle (40o
C 10min) 30A @ 30%
Severance Cut for
Carbon Steel ≤ 15mm
Production Cut
• Carbon Steel
• Stainless Steel
• Aluminium
• Copper
≤ 10mm
≤ 10mm
≤ 10mm
≤ 6mm
Net Weight 7.3kg
Dimensions 505mm x 147mm x 305mm
Insulation Class H
Protection Class IP21S
Power Factor 0.63
Air Compressor MPa 0.3-0.45(0 reviews) -
Machines & KitsDURALLOY 240V Inverter Plasma Cutter
SPECIFICATIONS
Power Supply 90VAC – 275VAC
Supply Plug 15 Amps
Frequency 50/60Hz
1-110/120/130V ± 10% 1-220/230/240V ± 10%
Input Power 3.8kW 4.9kW
Input Current 34.5A 22.6A
Duty Cycle
40o
C 10min
30A 35%
22A 60%
20A 100%
40A 35%
32A 60%
25A 100%
Cutting Current 20 – 30A 20 – 40A
Severance Cut for
Carbon Steel ≤ 20mm ≤ 25mm
Production Cut
• Carbon Steel
• Stainless Steel
• Aluminium
• Copper
≤ 15mm
≤ 15mm
≤ 12mm
≤ 8mm
≤ 20mm
≤ 20mm
≤ 16mm
≤ 12mm
Net Weight 8kg
Dimensions 505mm x 147mm x 305mm
Insulation Class H
Protection Class IP23
Cooling Auto Fan
Power Factor 0.99(0 reviews) -
Machines & KitsDURALLOY 240V Multiprocess Inverter Welding Machine
SPECIFICATIONS
Power Supply 90V – 275V
Frequency 50/60Hz
Input Power 7.3 kW
Input Current 38 A
Duty Cycle
40o
C 10min
250A @ 15%
125A @ 60%
100A @100%
No Load Voltage 68V
Welding Current 40A – 250A
Welding Voltage 14V – 26V
Efficiency 80%
Power Factor 0.99
Wire Diameter Fe: 0.6/0.8/0.9/1.2 Ss: 0.8/0.9/1.0/1.2
Flux-Cored: 0.6/0.8/0.9/1.0/1.2
Net Weight 23kg
Dimensions 618mm x 240mm x 445mm
Insulation Class H
Protection Class IP23S
Cooling Auto Fan(0 reviews)
