Shop
Showing 1477–1512 of 6151 results
-
Chemicals, Lubricants & AdhesivesCRC White Zinc
DESCRIPTION
CRC White Zincs unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a coloured satin finish in recognised safety colours. High levels of anti-corrosive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent adhesion to bare metal. CRC White Zinc provides a satin top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion by forming an effective corrosion barrier. For ultimate protection, prime the metal surface with CRC Zinc It prior to applying CRC White Zinc. To achieve a high film build, use CRC Prep It as an intermediate coat if required. Ongoing protection can be achieved through simple re-coating within 3 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.Applications
Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply a number of thin coats with smooth even strokes to clean, dry surface holding can approximately 25cm from surface. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
Features/Benefits:
Zinc enriched for corrosion protection – High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating Satin finish – Available in seven colours. Safety – Colours conform to British Safety Colour standards. Excellent adhesive qualities – Forms a tough coat for long-term protection. Heat Resistance – Up to 120°C. Corrosion protection – Corrosion Protection Factor 36 (up to 3 years before recoating is necessary, depending on conditions). Fast drying – Touch dry in 20 minutes, recoat within 30 minutes, full cure in 24 hours. Easy re-application over existing film and/or clean surfaces – For ongoing protection. Single coat – No over coating required.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Wire Rope and Cable Lubricant
DESCRIPTION
CRC Wire Rope and Cable Lubricant is a special blend of synthetic lubricants, solvents and Molybdenum designed to keep chains and wire rope in peak operating condition. With a low viscosity and wet film, CRC Wire Rope and Cable Lubricant penetrates deeply between chain links and wire strands to reduce friction and wear that cause metal fatigue. CRC Wire Rope and Cable Lubricant also contains a tackifier that enables the lubricant to cling tenaciously to metal surfaces without increasing the viscosity. Regular use of CRC Wire Rope and Cable Lubricant will help inhibit corrosion, reduce load stress and prevent wire strands from becoming brittle and fraying.Applications
Recommended for use as a lubricant and corrosion inhibitor on low speed conveyor & drive chains, hoists, winches, pulleys, cushion pins, rollers, garage doors, bushings, seals, O-rings, and come alongs
Features/Benefits:
Low viscosity provides the ability to penetrate and thoroughly coat interior wire strands and cushion pins. Contains Molybdenum which has cling ability to avoid sling off or excess dripping, and prevents lubricant from pooling at lower ends.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCRC Yellow Zinc
DESCRIPTION
CRC Yellow Zincs unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating and a coloured satin finish in recognised safety colours. High levels of anti-corrosive zinc complexes are embedded in a resin system which forms a quick-drying highly-protective enamel coating with excellent adhesion to bare metal. CRC Yellow Zinc provides a satin top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion by forming an effective corrosion barrier. For ultimate protection, prime the metal surface with CRC Zinc It prior to applying CRC Yellow Zinc. To achieve a high film build, use CRC Prep It as an intermediate coat if required. Ongoing protection can be achieved through simple re-coating within 3 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.Applications
Shake can until agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed. Apply a number of thin coats with smooth even strokes to clean, dry surface holding can approximately 25cm from surface. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes.
Features/Benefits:
Zinc enriched for corrosion protection – High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating Satin finish – Available in seven colours. Safety – Colours conform to British Safety Colour standards. Excellent adhesive qualities – Forms a tough coat for long-term protection. Heat Resistance – Up to 120°C. Corrosion protection – Corrosion Protection Factor 36 (up to 3 years before recoating is necessary, depending on conditions). Fast drying – Touch dry in 20 minutes, recoat within 30 minutes, full cure in 24 hours. Easy re-application over existing film and/or clean surfaces – For ongoing protection. Single coat – No over coating required.
(0 reviews) -
Corrosion InhibitorsCRC Zinc It
CRC ZINC IT is a single component zinc rich compound with a special epoxy binder and contains 95% of the highest purity zinc in the dried film, to give galvanic rust prevention.
Recommended for use on structural steel, trailers, roofs, guard rails, welding seams, rivet holes, fencing, storage tank transformers, power generation equipment, off shore oil rigs, ships, railroad equipment, substation equipment, transmission towers, touch up over galvanized coatings, coastal and ship borne installations subject to severe salt water and salt spray corrosion.
Easy to apply – aerosol only. Long term protection to steel because of cathodic action. Metallic zinc coating is universally accepted as the best method of rust prevention. Flexible continuous protective film. Does not contain lead. Excellent weldability.
(0 reviews) -
DebirillatorsDefibrillator (AED) HeartSine Samaritan 360P
The HeartSine Samaritan 360P Defibrillator is a Fully-Automatic defibrillator (AED) that analyzes the heart rhythm and delivers an electrical shock to victims of Sudden Cardiac Arrest in order to restore the heart to normal rhythm. User-friendly and provides Easy to understand visual and voice prompts guide the rescuer through the entire resuscitation process. This model doers not include CPR Advisor Technology, this is only included in the 500p model. (See video below for how it works)
Features:
- 12 months Subscription to Safety On (Professional Plan) – including Installation, Maintenance and How to Use Videos – valued at $240
- 8 Year Warranty
- Auto-Automatic Shock Delivery (eliminating the need for the rescuer to push a shock button)
- Easy to Follow Visual and Verbal Guides
- Portable & Lightweight
- High level Production from Dust & Water (IP56 Rating)
- Suitable for use on Adults & Children. (Adult pads included, Child Pads (PDPK04) can be purchased Separately)
- Maintenance Free
- Cost Effective to Run
- Event Recording
- TGA Approved (ARTG 228210)
Usage
The 360P is suitable for use on adults and children. Adult Pad Pak is included.
For children younger than 8 years or weighing less than 25 kg (55 lbs), a Pediatric-Pak is required and can be purchased separately. Fully automatic the 360p model detects motion or other significant interference to reduce the likelihood that the user is touching the patient prior to shock delivery.Battery & Pad-Pack
The 360P uses HeartSine’s Pad-Pak, which incorporates the battery and electrodes in a single-use cartridge – meaning only one expiration date to monitor and only one item to replace after use.
Each Pad-Pak has a shelf life of 4 years from date of manufacture and provides 60 shocks or six hours of continuous monitoring.
When battery power is down to ten shocks or less, the 360p AED will emit an audible beep to alert it needs to be replaced.Clinically validated technology
The HeartSine Samaritan PAD utilizes proprietary electrode technology and SCOPE™ biphasic technology, a low energy escalating waveform, that automatically adjusts for differences in patient impedance.Always ready
A System Status Ready Indicator flashes to show that the complete system is operational and ready for use. The device automatically runs a self-check each week.Low cost of ownership
With a shelf life of four years from date of manufacture, the Pad-Pak offers significant savings over other defibrillators that require separate battery and electrode replacements.
PADPAK replacement is a low cost every 4 years approx or after use.(0 reviews) - 12 months Subscription to Safety On (Professional Plan) – including Installation, Maintenance and How to Use Videos – valued at $240
-
DebirillatorsDefibrillator (AED) HeartSine Samaritan 500P
The HeartSine Samaritan 500P Defibrillator is a Semi-Automatic Public Access Defibrillator (AED) with Integrated CPR Advisor that analyzes the heart rhythm and delivers an electrical shock to victims of Sudden Cardiac Arrest in order to restore the heart to normal rhythm. User-friendly and provides Easy to understand visual and voice prompts guide the rescuer through the entire resuscitation process. This is the Defib that saved a wiggle. (See video below for how it works).
CPR Advisor – Real Time CPR Feedback (Best Technology Available to save a life)
- CPR Advisor provides feedback to rescuers on the effectiveness of the CPR they are providing to the victim.
- The 500p model uses both ECG & ICG measurements to analyse the effectiveness and the rate of compressions given and based on this will advise the rescuer to push harder, faster or slower as appropriate.
- Feedback on the quality of the compressions being given is provided to the responder by means of both audible and visual prompts.
- Good quality CPR is vital part of the resuscitation process, By performing CPR you are manually restoring blood circulation and oxygen to the Body/Brain. This is critical !!!
- Only Available with the 500p model. (See video below for how it works)
Features:
- 12 months Subscription to Safety On (Professional Plan) – including Installation, Maintenance and How to Use Videos – valued at $240
- 8 Year Warranty
- CPR Advisor Technology
- Semi-Automatic Shock Delivery (allowing the rescuer to push the shock button)
- Easy to Follow Visual and Verbal Guides
- Portable & Lightweight
- High level Production from Dust & Water (IP56 Rating)
- Suitable for use on Adults & Children. (Adult pads included, Child Pads (PDPK04) can be purchased Separately)
- Maintenance Free
- Cost Effective to Run
- Event Recording
- TGA Approved (ARTG 228210)
Usage
The 500P is suitable for use on adults and children. Adult Pad Pak is included.
For children younger than 8 years or weighing less than 25 kg (55 lbs), a Pediatric-Pak is required and can be purchased separately.Battery & Pad-Pack
The 500P uses HeartSine’s Pad-Pak, which incorporates the battery and electrodes in a single-use cartridge – meaning only one expiration date to monitor and only one item to replace after use.
Each Pad-Pak has a shelf life of 4 years from date of manufacture and provides 60 shocks or six hours of continuous monitoring.
When battery power is down to ten shocks or less, the 500P AED will emit an audible beep to alert it needs to be replaced.Clinically validated technology
The HeartSine Samaritan PAD utilizes proprietary electrode technology and SCOPE™ biphasic technology, a low energy escalating waveform, that automatically adjusts for differences in patient impedance.Always ready
A System Status Ready Indicator flashes to show that the complete system is operational and ready for use. The device automatically runs a self-check each week.Low cost of ownership
With a shelf life of four years from date of manufacture, the Pad-Pak offers significant savings over other defibrillators that require separate battery and electrode replacements.
PADPAK replacement is a low cost every 4 years approx or after use.(0 reviews) -
Log BooksDemountable Bin Truck Safety Check Logbook
A4 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Diesel Powered Welding Equipment Safety Check Logbook
A4 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Disabled Hoist Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Jackets & RainwearDNC Hi-Vis Lightweight Rain Pants
DNC Hi-Vis Lightweight Rain Pants 3880
Sizes: S – 6XL
Colours: Orange/Navy, Yellow/Navy
- SUN Protection UPF 40+ – 50+ DNC garments are tested for UPF (ultraviolet protection factor) in accordance with AS/NZS4399:1996. The level of protection varies depending on the fabric and colour of the garment. 15+ good protection, 30+ / 35+ very good protection, 40+ / 50+ excellent protection.
- Environmentally Friendly Green Dye Oeko-Tex Standard 100 Safe to wear against the skin All DNC garments use the Green Dye only, except for the Patrol Saint Flame Retardant range. All DNC garment fabric fully complies with Oeko-Tex standard 100 class II for products with direct contact to the skin in which prohibited to use aromatic amines, sensitizing dyes and cancer risk dyes. Green dye should meet the following conditions: Does not contain harmful or non-aromatic amine; dye itself, non[1]carcinogenic, sensitization, acute toxicity; the use of formaldehyde and, after extraction of heavy metals in the following limits; non-environmental hormone; non persistent organic pollutants; does not produce pollution of the environment harmful chemicals; not produce chemicals that pollute the environment; colour fastness and superior to disable the use of dyes.
- Waterproof DNC Rainwear and HiVis Jackets are made of a polyester outer, PU coated inner and all seam sealed 100% waterproof.
- HiVis Day Fabric & Design New AS/NZS 4602.1:2011 DNC HiVis garments are manufactured to comply with New Hi Vis standard Class F AS/NZS1906.4:2010, Class D AS/NZS 4602.1:2011 to meet the requirements of Hi-Vis safety standards for both HiVis Fabric & Design of garments, (Section 6.4) day use.
- Lightweight DNC provide entire ranges of lightweight fabrics as an alternate to regular weight garments. Features include quicker drying, breathable and a more comfortable light weight feel.
- CSR Reflective Tape Alternatively DNC also use premium quality Reflective Tape for the value hi-vis range. CSR Reflective tape fully complies with AS/NZS1906.4:2010 for Hi Vis material. Home wash 50 Cycles @ 60° C
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Log Books
Drain Cleaning Truck Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Machines & KitsDURALLOY 10 Amp Multiprocess Inverter Welding Machine
SPECIFICATIONS
Power Supply 240V
Supply Plug 10 Amp
Frequency 50/60Hz
240V ± 10%
MIG MMA TIG
Input Current 24/10A 30/10A 32/10A
Duty Cycle
40o
C 10min
160A 15%
80A 60%
62A 100%
140A 25%
100A 60%
80A 100%
160A 35%
100A 60%
90A 100%
No Load Voltage 54V
Welding Current 10 – 175A
Welding Voltage 14V – 24V
Efficiency 80%
Power Factor 0.76
Wire Diameter Fe: 0.6 – 0.9 Ss: 0.8/0.9
Flux-Cored: 0.8 – 0.9 AL: 1.0
Net Weight 10kg
Dimensions 490mm x 230mm x 390mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 10A MIG/Stick Inverter Welding Machine
SPECIFICATIONS
Power Supply 240V
Supply Plug 10 Amp
Frequency 50/60Hz
240V ± 10%
MIG MMA
Input Current 24/10A 30/10A
Duty Cycle
40o
C 10min
140A 15%
80A 60%
62A 100%
140A 25%
100A 60%
80A 100%
No Load Voltage 52V
Welding Current 10 – 140A
Welding Voltage 15 – 23V
Efficiency 85%
Power Factor 0.76
Wire Diameter Fe: 0.6 – 0.8 Ss: 0.8
Flux-Cored: 0.8 – 0.9
Net Weight 8.2kg
Dimensions 430mm x 150mm x 290mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 15 Amp 240V Multiprocess Inverter Pulse MIG Welding Machine
SPECIFICATIONS
Power Supply 240V
Supply Plug 15 Amp
Frequency 50/60Hz
240V ± 10%
MIG MMA TIG
Input Current 31/12A 36/14A 23/11A
Duty Cycle
40o
C 10min
180A 15%
90A 60%
70A 100%
180A 15%
90A 60%
70A 100%
180A 25%
116A 60%
90A 100%
No Load Voltage 64V
Welding Current 30A – 180A
Welding Voltage 15.5V – 23V
Efficiency 77%
Power Factor 0.73
Wire Diameter Fe: 0.8 – 0.9
SS: 0.8-0.9
Flux-Cored: 0.8 -0.9
AL: 1.0 -1.2
Net Weight 12.2kg
Dimensions 520mm x 215mm x 385mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & Kits
DURALLOY 15 Amp Multiprocess Inverter Welding Machine
SPECIFICATIONS
Power Supply 240V
Supply Plug 15 Amp
Frequency 50/60Hz
240V ± 10%
MIG MMA TIG
Input Current 32/15A 32/15A 32/15A
Duty Cycle
40o
C 10min
200A 20%
115A 60%
89A 100%
200A 25%
140A 60%
100A 100%
200A 35%
140A 60%
100A 100%
No Load Voltage 54V
Welding Current 50A – 200A
Welding Voltage 16.5V – 24V
Efficiency 80%
Power Factor 0.76
Wire Diameter Fe: 0.6 – 0.9 Ss: 0.8/0.9
Flux-Cored: 0.8 – 1.2 AL: 1.0
Net Weight 10kg
Dimensions 490mm x 230mm x 390mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 240V 140 AMP Portable MMA Inverter Welder
PORTABLE
The machine weighs just 2kg ensuring ease
of portability.
DIGITAL DISPLAY
Variable amperage control with digital meter.
PROTECTIONS
Equipped with temperature, voltage and
current sensors for greater protection.
FEATURES
• Highly portable
• 10 Amp primary plug
• IP21S rating
• Arc Force, Hot Start, Anti Stick & VRD all
built-in
• MMA & LIFT TIG functions
• Exceptional smooth Arc characteristics
SPECIFICATIONS
Power Supply 1-240kW ± 10%
Supply Plug 10 Amps
Frequency 50/60Hz
Input Current 30/10 Amps
Duty Cycle
40o
C 10min
140A @ 10%
58A @ 60%
45A @ 100%
No Load Voltage 64V
Welding Current 10 – 140A
Efficiency ≥ 85%
Net Weight 2kg
Dimensions 225mm x 95mm x 130mm
Protection Class IP21S
Insulation Class H
Cooling Fan
Electrode Diameter Ø1.6 – Ø3.2
Electrode Type 6013, 7018, etc.
Power Factor 0.76
APPLICATIONS
• Home or farm use
• Portable on-site
maintenance
• DIY
MATERIALS
• Mild Steel
• Stainless Steel
PACKAGE INCLUDES
• Power Source
• MMA Earth Lead & Clamp
• MMA Arc Lead & Holder
• Owner’s Manual(0 reviews) -
Machines & KitsDURALLOY 240V 180Amp Portable MMA Inverter Welder
SPECIFICATIONS
Power Supply 240V
Supply Plug 15 Amps
Frequency 50/60Hz
Input Power 5.8kW
Input Current 15A/34A
Duty Cycle
40o
C 10min
180A 20%
104A 60%
80A 100%
No Load Voltage 80V
Welding Current 10 – 180A
Efficiency ≥ 85%
Net Weight 3.5kg
Dimensions 265mm x 120mm x 218mm
Protection Class IP23
Insulation Class F
Cooling Auto Fan
Electrode Diameter Ø1.6 – Ø4.0
Electrode Type 6013, 7018, etc.
Power Factor 0.76(0 reviews) -
Machines & KitsDURALLOY 240v AC/DC TIG Inverter Welding machine
SPECIFICATIONS
Power Supply 240V
Frequency 50/60Hz
AC TIG DC TIG
Input Current 37A
Welding Current
HF LIFT DC
10 – 200A 30 – 200A 10 – 200A
Duty Cycle
40o
C 10min
10% 200A
60% 82A
100% 63A
10% 180A
60% 73A
100% 57A
Max. No Load Voltage 78V
Down Slope 0 – 5 S
Post Flow 1 -10 S
AC Frequency 60 HZ
Net Weight 8kg
Dimensions 475mm x 185mm x325mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 240v AC/DC TIG Inverter Welding machine
SPECIFICATIONS
Power Supply 1-220/230/240 ± 10%
Frequency 50/60Hz
AC TIG DC TIG MMA
Input Power 4.3kW 3.8kW 5.7kW
Input Current 15/30A 15/27A 15/41A
Duty Cycle
40o
C 10min
200A 30%
155A 60%
120A 100%
170A 30%
140A 60%
110A 100%
No Load Voltage 52 V
Welding Current 10A – 200A 10A – 170A
Down Slope 0 – 10 S
Post Flow 1 -10 S
Pulse Frequency 0.5 – 100 HZ
AC Frequency 60 HZ
Pulse Width Range 5 – 95 %
Efficiency > 85%
Net Weight 9.2kg
Dimensions 410mm x 146mm x 278mm
Insulation Class H
Protection Class IP23
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 240V Inverter Plasma Cutter
SPECIFICATIONS
Power Supply 240V±10%
Supply Plug 10 Amps
Rated Input Current 22A
No-Load Voltage 310V
Current Range 20-30A
Rated Output Voltage 88-96
Duty Cycle (40o
C 10min) 30A @ 30%
Severance Cut for
Carbon Steel ≤ 15mm
Production Cut
• Carbon Steel
• Stainless Steel
• Aluminium
• Copper
≤ 10mm
≤ 10mm
≤ 10mm
≤ 6mm
Net Weight 7.3kg
Dimensions 505mm x 147mm x 305mm
Insulation Class H
Protection Class IP21S
Power Factor 0.63
Air Compressor MPa 0.3-0.45(0 reviews) -
Machines & KitsDURALLOY 240V Inverter Plasma Cutter
SPECIFICATIONS
Power Supply 90VAC – 275VAC
Supply Plug 15 Amps
Frequency 50/60Hz
1-110/120/130V ± 10% 1-220/230/240V ± 10%
Input Power 3.8kW 4.9kW
Input Current 34.5A 22.6A
Duty Cycle
40o
C 10min
30A 35%
22A 60%
20A 100%
40A 35%
32A 60%
25A 100%
Cutting Current 20 – 30A 20 – 40A
Severance Cut for
Carbon Steel ≤ 20mm ≤ 25mm
Production Cut
• Carbon Steel
• Stainless Steel
• Aluminium
• Copper
≤ 15mm
≤ 15mm
≤ 12mm
≤ 8mm
≤ 20mm
≤ 20mm
≤ 16mm
≤ 12mm
Net Weight 8kg
Dimensions 505mm x 147mm x 305mm
Insulation Class H
Protection Class IP23
Cooling Auto Fan
Power Factor 0.99(0 reviews) -
Machines & KitsDURALLOY 240V Multiprocess Inverter Welding Machine
SPECIFICATIONS
Power Supply 90V – 275V
Frequency 50/60Hz
Input Power 7.3 kW
Input Current 38 A
Duty Cycle
40o
C 10min
250A @ 15%
125A @ 60%
100A @100%
No Load Voltage 68V
Welding Current 40A – 250A
Welding Voltage 14V – 26V
Efficiency 80%
Power Factor 0.99
Wire Diameter Fe: 0.6/0.8/0.9/1.2 Ss: 0.8/0.9/1.0/1.2
Flux-Cored: 0.6/0.8/0.9/1.0/1.2
Net Weight 23kg
Dimensions 618mm x 240mm x 445mm
Insulation Class H
Protection Class IP23S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 240V Pulse Multiprocess Inverter Welding Machine
SPECIFICATIONS
Frequency 50/60Hz
Input Power KW 1~110/120/130±10% 1~220/230/240±10%
MIG TIG MMA MIG TIG MMA
Input Current (A) 38 27 35 36 28 40
Input Current (KW) 4.5 3.3 4.2 8.0 6.3 9.0
Duty Cycle
40o
C 10min
160A 30%
115A 60%
90A 100%
150A 30%
110A 60%
85A 100%
130A 30%
95A 60%
75A 100%
250A 30%
180A 60%
140A 100%
No Load Voltage 15V
Welding Current (A) 15-160 10-150 10-130 15-250 10-250
Welding Voltage 16-26.5 (MIG)
Diameter (mm)
Fe:0.6/0.8/0.9/1.0/1.2
SS: 0.8/0.9/1.0/1.2
Flux-Cored:0.8/0.9/1.2
Al:0.9/1.0/1.2
Net Weight 27kg
Dimensions 690mm x 240mm x 450mm
Protection Class IP23
Insulation Class H
Power Factor 0.99(0 reviews) -
Machines & KitsDURALLOY 415V Multiprocess Inverter Welding Machine
SPECIFICATIONS
Power Supply 415V
Supply Plug 20 Amp
Frequency 50/60Hz
415V ± 10%
MIG MMA TIG
Input Current 23A 20A 18A
Duty Cycle
40o
C 10min
60% @ 350A
100% @ 271A
60% @ 300A
100% @ 232A
60% @ 350A
100% @ 271A
No Load Voltage 84V
Welding Current 10A – 350A
Efficiency 77%
Power Factor 0.73
Wire Diameter 0.8 – 0.9 – 1.0 – 1.2
Net Weight 42g
Dimensions 950mm x 560mm x 860mm
Insulation Class H
Protection Class IP21S
Cooling Auto Fan(0 reviews) -
Machines & KitsDURALLOY 415V Multiprocess Inverter Welding Machine
SPECIFICATIONS
Input Voltage 415V 3 Phase
Frequency 50/60 Hz
Input Power 14 kW
Input Current 20 Amps
Duty Cycle
40o
C 10min
60% 350A
100% 275A
No Load Voltage 67 V
Welding Current 40-350 A (MIG)
Welding Voltage 10-35 V (MIG)
Wire Diameter Fe:0.6/0.8/0.9/1.0/1.2 SS:0.8/0.9/1.0/1.2
Flux-Cored:0.8/0.9/1.0/1.2
Protection Class IP23S
Power Factor 0.7(0 reviews) -
Machines & KitsDURALLOY 415V Multiprocess Inverter Welding Machine
SPECIFICATIONS
Input Voltage 415V 3 Phase
Frequency 50/60 Hz
Input Power 23 kW
Input Current 32 Amps
Duty Cycle
40o
C 10min
60%500A
100%400A
No Load Voltage 68 V
Welding Current 40-500 A (MIG)
Welding Voltage 14-50 V (MIG)
Wire Diameter Fe:0.6/0.8/0.9/1.0/1.2/1.6 SS:0.8/0.9/1.0/1.2/1.6
Flux-Cored:0.8/0.9/1.0/1.2/1.6
Protection Class IP23S
Power Factor 0.75(0 reviews) -
Machines & KitsDURALLOY 415V Transformer MIG Welding Machine
SPECIFICATIONS
Input Voltage 415V 3 Phase
Frequency 50/60 Hz
Absorbed Power 40% 15.8 KVA 60% 10.6 KVA 100% 7.7 KVA
Current Range 35 ÷ 400A
Input Current 20 Amps
Duty Cycle
40o
C 10min 40% @ 350A 60% @ 290A 100% @ 220A
Adjustment
Range n. 2 x 8
Welding Current 35 – 400A
Welding Voltage 14 – 35V
Wire Diameter Fe:0.6/0.8/0.9/1.0/1.2/1.6 SS:0.8/0.9/1.0/1.2/1.6
Flux-Cored:0.8/0.9/1.0/1.2/1.6
Protection Class IP21S
Standards EN60974-1 EN60974-10
Dimension/
Weight 506 x 897 x 1245 mm / 123 kg(0 reviews) -
Welding SuppliesDURALLOY Aluminium Mig Wire
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Machines & KitsDURALLOY DC Inverter DC HF TIG Welding Machine
SPECIFICATIONS
Power Supply 240 V
Supply Plug 15 A
Frequency 50 / 60 Hz
240V ± 10%
TIG MMA
Input Current 15/33.5A
Duty Cycle
40o
C 10min
200A @ 25%
129A 60%
100A 100%
No Load Voltage 89V
Welding Current 5A – 200A
Efficiency 85%
Power Factor 0.75
Net Weight 7.5kg
Dimensions 410mm x 150mm x 300mm
Insulation Class H
Protection Class IP23
Cooling Auto Fan(0 reviews) -
Wire & RodsDURALLOY Gasless Mig Wire
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Wire & RodsDURALLOY General Purpose Electrodes
General Purpose Electrode suitable for welding all mild and low alloy steels in all positions. Easy slag removal and easy arc striking make the Duralloy General Purpose Electrode the right choice for multiple applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Wire & RodsDURALLOY Hydrogen Controlled Electrodes
Low hydrogen electrodes for mild or high strength steels, where higher joint strength is required, such as components subject to higher load stress and strain. Also used as a buffer layer prior to hard facing. Smooth arc, easy-striking, with easy slag removal.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Machines & Kits
DURALLOY Inverter AC/DC PFC Pulse TIG Welding Machine
SPECIFICATIONS
Power Supply 110V – 240V ± 10%
Supply Plug 15 A
Frequency 50 / 60 Hz
Input Current 17A
Duty Cycle
40o
C 10min
TIG 110V TIG 240V MMA 110V MMA 240V
60% @ 160A
100% @ 125A
60% @ 200A
100% @ 155A
30% @ 130A
100% @ 80A
35% @ 200A
100% @ 110A
No Load Voltage 67V
Welding Current 5A – 200A
Efficiency 97%
Power Factor 0.97
Net Weight 15kg
Dimensions 410mm x 150mm x 300mm
Insulation Class H
Protection Class IP23
Cooling Auto Fan(0 reviews) -
Wire & RodsDURALLOY Low Alloy Steel Mig Wire
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Machines & KitsDURALLOY Portable 240V Stainless Steel Weld Cleaning Machine
SPECIFICATIONS
Input Voltage 220V
Input Power 1.2kW
Current 8 – 60A
Duty Cycle 100%
No-Load Voltage 17V
Dimensions (WxDxH) 132 x 38 x 23mm
Weight 3.5kg
OPTIONAL BRUSH SIZES
Model Brush Type Size (mm)
PCB0106 Brush Head M6 No.1 11
PCB0108 Brush Head M8 No.1 11
PCB0206 Big Brush Head M6 No.2 11
PCB0208 Big Brush Head M8 No.2 11
PCE8810 Extension M8-M8 8.5(0 reviews) -
Machines & KitsDURALLOY Portable MMA 180A Battery Powered Welding Machine
PORTABLE
Cordless operation is perfect for any MMA
welding job on inaccessible sites without direct
access to electricity.
DIGITAL DISPLAY
Variable amperage control with digital meter.
PROTECTIONS
Equipped with temperature, voltage and
current sensors for greater protection. Built-in
protection from over-charging, deep discharge
and over-heating.
FEATURES
• Quick charge battery charges to 80% in 35
minutes, fully charged in 60 minutes
• MMA and DC Lift TIG welding
• VRD Function
• Variable amperage control with digital display
• Built in hot start, arc force and anti-stick
• Overcharging and overheating protection
• Welder operational while charging
• Battery charge indicator
• Included carry case protects
power source against
damage during transport
BATTERY LIFE
• 20 x 2.5mm @ 70amps
• 12 x 3.2mm @ 90amps
• 6 x 4.0mm @ 140amps
Battery life is approximate and may vary
SPECIFICATIONS
Battery Capacity 740Wh ± 5%
Battery Rated Voltage 74V
AC Charging Voltage/Current 230V / 8A
Battery Type Ternary Lithium Battery
18650-2500mAh
Welding Range 10 – 180A
Duty Cycle
40o
C 10min
10% 180A
20% 130A
100% 100A
Charge Time 35mins to 80%
1 hour to 100%
Charge/Discharge Cycle Life 500 times
Charge Temperature 0 – 40°C
Discharge Temperature -20 – 40°C
Cooling Type AF
Protection Class IP21S
Welder Dimension (W x D x H) 440 x 150 x 280 mm
Weight (Welder) 11.5kg
APPLICATIONS
• Farm & rural maintenance
• Portable on-site repair &
maintenance
• Mining
• Welding sites without direct
access to electricity
MATERIALS
• Mild steel
• Stainless steel
• Cast Iron
• Dissimilar metals
PACKAGE INCLUDES
• Power Source
• Battery Charger
• Charging Cables
• Carry Case
• MMA Earth Lead & Clamp
• MMA Arc Lead & Holder
• Owner’s Manua(0 reviews)
