Shop
Showing 12133–12168 of 15223 results
-
KeypadsRICHMOND Wireless Gate Keypad
- Wireless keypad with clear pastic cover
- Rated to IP54
- 2 x AAA 1.5V batteries
(0 reviews) -
KeypadsRICHMOND Wireless Gate Keypad with Waterproof Cover
- Power Supply:Â DC 6V (4 x AAA batteries).
- Standby Current:Â 18uA (Sleep mode), 6mA (working mode).
- Working Current:Â 28mA (working mode).
- Two channel RF 433MHZ transmitting. HCS301 rolling code.
- IP44 rating. Suitable for outdoor use.
(0 reviews) -
Entry & Exit AutomationRICHMOND Wireless Vehicle Detection System – Micro e-Loop
Designed to be to be easily integrated into any gate system: the e-Loop micro is the perfect product for any gate installer. The e-loop micro offers cost effective exit automation with quick and easy installation.
- Up to 25m range
- Includes a CR123a battery with a lifespan of up to 2 years
- Ultra compact design
- Compact Diameter of ~110mm
- Includes a e-Trans 20 transceiver for quick connection to your gate motor
- High security 128-Bit AES Encryption
- Quick Non-Permanent Installation
- Set-and-Forget auto calibration
- Available in Exit mode
- 2500kg maximum capacity
This accessory is compatible with all Richmond gate openers.
(0 reviews) -
Entry & Exit AutomationRICHMOND Wireless Vehicle Detection System – Mini e-Loop
The e-Loop Mini replaces traditional wired inductive loops, entry and exit ground wands, saving you time and money while increasing reliability.
The e-Loop Mini is perfect for domestic applications.
Features:
- Quick and easy installation
- Small compact design (120mm (L) x 120mm (W) x 30mm (H)
- 2500kg Static load capacity
- Uses standard 1.5V AA Lithium batteries providing up to 3 years battery life
- High security 128-bit encryption
- Range up to 30m
This accessory is compatible with all Richmond gate openers.
(0 reviews) -
Log BooksRide On Mower Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Rigid Tray Truck Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Medical InstrumentsRing Cutter
Ring Cutter stainless steel pro model to use in first aid rooms and hospitals.
- Precision ring cutter can cut through rings and other jewelry worn tight to the skin without fear of harm
- Metal clasp shields blade from the skin
- Serrated circular blade makes cutting quick and easy
- An essential emergency tool that quickly removes rings from fingers.
- Stainless steel handle with safety lever slides protective plate between finger and ring.
- Large thumb screw operates a razor-sharp serrated saw
(0 reviews) -
Log Books
Roller Compaction Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Roller Door Safety Check Logbook
DL SIZE. (210mm x 100mm)
DAILY PRE START & AFTER START SAFETY CHECKS.
12 MONTHS RECORDING, 7 DAYS A WEEK.
FAULT REPORTING & SERVICE DETAILS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET
(0 reviews) -
HSS Bright Jobber DrillsSABER Bright Finish HSS Jobber Drill Fractional
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS Bright Jobber Drills
SABER Bright Finish HSS Jobber Drill Fractional Sets
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS Bright Jobber Drills
SABER Bright Finish HSS Jobber Drill Metric
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS Bright Jobber Drills
SABER Bright Finish HSS Jobber Drill Metric Sets
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Ball
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical Ball Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Burrs
SABER Burrs Express Cut Cylindrical with End Cut
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Flame
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Included Angle
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Oval
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Pointed Cone
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Sets
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Pointed Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Radius Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Ball
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical with Ball Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Included Angle
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Tree Radius Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersink HSS Triple Flute Hex Shank
- Specifically engineered for use in impact drivers these bits are also fully compatible with conventional rotary drills.
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- Manufactured from premium quality high speed steel for long service life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersink HSS Triple Flute Hex Shank Set
- Saber HSS Countersink Triple Flute 90 Deg. Bright Hex Shank Set
- Specifically engineered for use in impact drivers these bits are also fully compatible with conventional rotary drills.
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- Manufactured from premium quality high speed steel for long service life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks Essentials Countersink Sets
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks HSS-Co5 (Cobalt) Cross Hole Round Shank
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provides fast stock removal with low vibration for chatter-free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons.
- They also may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks HSS-Co5 (Cobalt) Cross Hole Round Shank Set
- Saber HSS-Co5 (Cobalt) TiN Coated Cross Hole Round Shank 90 Deg. Countersink Set
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provides fast stock removal with low vibration for chatter-free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons.
- They also may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks HSS-Co5 (Cobalt) Triple Flute Round Shank
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
