Shop
Showing 6193–6228 of 7710 results
-
Manual Pallet JacksRICHMOND ROLLING SOLUTIONS Quick-Lift 2500kg Powder Coated Pallet Jack
Made for lifting, shifting, and placing Australian pallets. This pallet jack features a quick-lift raise up to 180kg to speed up light moving tasks.
- 2,500kg safe working load (SWL)
- Quick lift function up to 180kg – less pumping required for light moving tasks
- 1 year warranty
- 685mm overall width
- designed for standard Australian pallets
- Sealed dust and waterproof precision hydraulic pump
- Ergonomic, smooth action lift handle
- Grease nipple for easy lubrication and maintenance
- Fitted with industrial Nylon wheels and rollers (optional Polyurethane Rollers available)
(0 reviews) -
Manual Pallet JacksRICHMOND ROLLING SOLUTIONS Short and Narrow 2500kg Powder Coated Pallet Jack
This high quality short and narrow pallet jack is ideal for handling skids and small pallets in the tightest of spaces.
- 2,500kg safe working load (SWL)
- 1 year warranty
- 540 overall width
- Shorter 800mm fork length
- designed for transporting skids
- Sealed dust and waterproof precision hydraulic pump
- Ergonomic, smooth action lift handle
- Grease nipple for easy lubrication and maintenance
- Fitted with industrial Nylon wheels and rollers (optional Polyurethane Rollers available)
(0 reviews) -
Pallet Jacks & Scissor LiftsRICHMOND ROLLING SOLUTIONS Single Scissor Lift Table 150kg
The Richmond scissor lift table is essentially a 4-wheel hand trolley where the platform raises and lowers with the use of a hydraulically powered scissor mechanism. This scissor table lift has a multitude of uses in workshops, warehouses and despatch departments. Each table lifter is fitted with lockable castors and is operated with a foot controlled hydraulic pump in order to get what is on the table to a comfortable working height. They’re also designed to ensure smooth lifting, with the lowering speed fully adjustable via a hand operated valve.
(0 reviews) -
Pallet Jacks & Scissor LiftsRICHMOND ROLLING SOLUTIONS Single Scissor Lift Table 300kg
The Richmond scissor lift table is essentially a 4-wheel hand trolley where the platform raises and lowers with the use of a hydraulically powered scissor mechanism. This scissor table lift has a multitude of uses in workshops, warehouses and despatch departments. Each table lifter is fitted with lockable castors and is operated with a foot controlled hydraulic pump in order to get what is on the table to a comfortable working height. They’re also designed to ensure smooth lifting, with the lowering speed fully adjustable via a hand operated valve.
(0 reviews) -
Pallet Jacks & Scissor LiftsRICHMOND ROLLING SOLUTIONS Single Scissor Lift Table 500kg
The Richmond scissor lift table is essentially a 4-wheel hand trolley where the platform raises and lowers with the use of a hydraulically powered scissor mechanism. This scissor table lift has a multitude of uses in workshops, warehouses and despatch departments. Each table lifter is fitted with lockable castors and is operated with a foot controlled hydraulic pump in order to get what is on the table to a comfortable working height. They’re also designed to ensure smooth lifting, with the lowering speed fully adjustable via a hand operated valve.
(0 reviews) -
Manual Pallet JacksRICHMOND ROLLING SOLUTIONS Standard 2000kg Galvanised Pallet Jack
Safe Working Load (kg)Â 2000
Model Galvanised
Max Fork Height (mm)Â 190
Min fork height (mm)Â 85
Fork Length (mm)Â 1150
Fork Overall Width (mm)Â 680
Individual Fork Width (mm)Â 160
(0 reviews) -
Manual Pallet Jacks
RICHMOND ROLLING SOLUTIONS Standard 2000kg Galvanised Pallet Jack with Stainless Steel Handle
Safe Working Load (kg)Â 2000
Model Galvanised with Stainless Steel Handle
Max Fork Height (mm)Â 190
Min fork height (mm)Â 85
Fork Length (mm)Â 1150
Fork Overall Width (mm)Â 680
Individual Fork Width (mm)Â 160
(0 reviews) -
Manual Pallet JacksRICHMOND ROLLING SOLUTIONS Standard 2000kg Powder Coated Pallet Jack with Scale
The PJR110 pallet jack features an in-built scale with LCD display for quickly weighing loads up to 2000kg on the go!
- 2000kg safe working load (SWL)
- In-built scale with easy-to-read LCD display (+1kg to 2000kg)
- Rechargeable display with up to 45 hours battery life
- High-quality hydraulics
- 685mm overall fork width to suit most standard pallets
- 85mm-190mm fork height
- Ergonomic, smooth action lift handle
- Fitted with polyurethane wheels and rollers
- 120kg Weight
- 1 year warrantyÂ
(0 reviews) -
Manual Pallet JacksRICHMOND ROLLING SOLUTIONS Standard 2000kg Stainless Steel Pallet Jack
Rugged, reliable and ready for immediate use – the PJR007 is ready for use in any area where health and hygiene are of the utmost importance.
Why Choose the PJR007 Stainless Steel Pallet Jack?
- Grade 304 stainless steel pallet jack
- High-quality hydraulics
- Huge 2000kgs Safe Working Load
- Strong, reinforced steel construction
- Easy access entry and exit rollers
- Nylon wheels with high quality stainless bearings
- Ergonomic handle
- Easy to use release lever
- Designed specifically for Australian hardwood pallets
- So simple to operate – and always ready to go!
(0 reviews) -
Manual Pallet JacksRICHMOND ROLLING SOLUTIONS Standard 2500kg Powder Coated Pallet Jack
This popular, high-quality Pallet Jack is the industry standard for lifting, shifting, and placing Australian pallets
- 2,500kg safe working load (SWL)
- 1 year warranty
- 685mm overall width
- designed for standard Australian pallets
- Sealed dust and waterproof precision hydraulic pump
- Ergonomic, smooth action lift handle
- Grease nipple for easy lubrication and maintenance
- Fitted with industrial Nylon wheels and rollers (optional Polyurethane Rollers available)
(0 reviews) -
Pallet Jacks & Scissor LiftsRICHMOND ROLLING SOLUTIONS Table Lifter Double Scissor 350kg
These double scissor lift tables are identical in concept to the unit previous but will lift much higher which makes them very useful in the installation industry. Installing switchboards, ducting etc becomes much simpler with these lifters. A dual scissor mechanism operated by hydraulic foot pump allows for safe, stable load lowering and raising to heights up to 1.5m. They are recommended to reduce incidents of overreaching and unsafe lifting. Richmond’s Double Scissor Lift Tables are the solution for workshops, installers and maintenance applications. Easily positioned and correctly adjusted to a suitable height for the task at hand, table lifters lend themselves to being easily adapted to a multitude of uses.
(0 reviews) -
Pallet Jacks & Scissor LiftsRICHMOND ROLLING SOLUTIONS Table Lifter Double Scissor 500kg
- Huge 1600mm raised height
- Raise loads of up to 500kg with ease
- 150mm Polyurethane Tyred Cast Iron Wheels
These double scissor lift tables are identical in concept to the unit previous but will lift much higher which makes them very useful in the installation industry. Installing switchboards, ducting etc becomes much simpler with these lifters. A dual scissor mechanism operated by hydraulic foot pump allows for safe, stable load lowering and raising to heights over 1.5m. They are recommended to reduce incidents of overreaching and unsafe lifting. Richmond’s Double Scissor Lift Tables are the solution for workshops, installers and maintenance applications. Easily positioned and correctly adjusted to a suitable height for the task at hand, table lifters lend themselves to being easily adapted to a multitude of uses.
(0 reviews) -
Log BooksRide On Mower Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Rigid Tray Truck Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Medical InstrumentsRing Cutter
Ring Cutter stainless steel pro model to use in first aid rooms and hospitals.
- Precision ring cutter can cut through rings and other jewelry worn tight to the skin without fear of harm
- Metal clasp shields blade from the skin
- Serrated circular blade makes cutting quick and easy
- An essential emergency tool that quickly removes rings from fingers.
- Stainless steel handle with safety lever slides protective plate between finger and ring.
- Large thumb screw operates a razor-sharp serrated saw
(0 reviews) -
Log Books
Roller Compaction Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Roller Door Safety Check Logbook
DL SIZE. (210mm x 100mm)
DAILY PRE START & AFTER START SAFETY CHECKS.
12 MONTHS RECORDING, 7 DAYS A WEEK.
FAULT REPORTING & SERVICE DETAILS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET
(0 reviews) -
Drill Bits & SetsSABER Bright Finish HSS Jobber Drill Fractional
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
SABER Bright Finish HSS Jobber Drill Fractional Sets
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
SABER Bright Finish HSS Jobber Drill Metric
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
SABER Bright Finish HSS Jobber Drill Metric Sets
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Ball
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical Ball Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Burrs
SABER Burrs Express Cut Cylindrical with End Cut
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Flame
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Included Angle
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Oval
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Pointed Cone
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Sets
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Pointed Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Radius Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Ball
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical with Ball Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Included Angle
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page