Shop
Showing 5869–5904 of 8332 results
-
ARC/FR ResistantPRO CHOICE Eureka Heat FR Nitrile Glove
- Designed with Flame Retardant qualities, High Cut Resistance & Arc Flash Resistance.
- Arc Flash Certified according to ASTM F2675 ATPV, 60% Black Nitrile Coating = 30 Cal/cm2, 25% White Print (back) = 23 Cal/cm2 + 15% Green Liner Fabric = 5.8 Cal/cm2.
- NFPA 70E = Level 1.
- Oil & Water Repellent Coating.
- EN407 Heat Resistant to contact heat 100 degrees celsius
- ISO 13997 Level E Cut Protection = 24.4N.
- Comfortable, close fitting, high dexterity glove with maximum protection.
- Bio-degradable packaging
- Qty/Pack 6
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Needle Resistant RangePRO CHOICE Eureka Puncture Duo Cut F Glove
- High performance needle resistance in palm & back of hand. Perfect in tough working conditions where risks of sparks and sharp e
- Very High Level Cut Protection F+ with ISO 13997 Testing of 34.3 newtons.
- Hypodermic Needle Puncture resistance according to ASTM F2878-10 of 6N (25g Needle).
- Good Dry & Wet Grip on Palm & Fingers.
- Bio-degradable packaging
- Breathable Nitrile composite foam with FR Properties. Suitable for contact heat over a short time.
- Qty/Carton 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Needle Resistant RangePRO CHOICE Eureka Puncture Soft Cut F Glove
- Designed for improved dexterity whilst providing Needle Puncture & Cut Resistance this new generation glove delivers protection against a combination of extreme working hazards.
- Very High Level Cut Protection F+ with ISO 13997 Testing of 34.3 newtons.
- Hypodermic Needle Puncture resistance according to ASTM F2878-10 of 6N (25g Needle).
- Needle stick protection extended beyond the palm to around the thumb crotch and over the finger nails.
- Breathable Nitrile composite foam with FR Properties. Suitable for contact heat over a short time.
- Good Dry & Wet Grip combining with extra sensitivity, feel and control.
- Bio-degradable packaging
- Qty/Carton 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hard HatsPRO CHOICE EVO 6100 Full Brim Unvented Hard Hat with Miners Cap Attachment White
- The EVO 6100 Full Brim Mining Hard Hat combines a super strong HDPE shell with the comfort benefits of the Evolution 3D-Adjustment harness system.
- Complies to AS/NZS 1801 and EN 397
- Mining lamp bracket is non-corrosive and will receive 99% of the World’s Mining Lamps.
- Cable loop located on the rear of the hard hat keeps the cable in place.
- High-Density Polyethylene (HDPE) shell with a full brim providing additional protection against sun, glare, rain and falling debris.
- The extended back brim helps protect neck and ears from the sun’s UV rays. The short front brim shades the face while allowing excellent visibility.
- The brim includes finger grips on front and rear, as well as a textured underside to reduce reflection/glare.
- 6-Point suspension system with polyester textile straps offers unrivaled comfort without compromising performance.
(0 reviews) -
Hard HatsPRO CHOICE EVO 6100 Full Brim Unvented Wheel Ratchet Hard Hat White
- The EVO 6100 Full Brim Hard Hat combines a super strong HDPE shell with the comfort benefits of the Evolution 3D-Adjustment harness system.
- Complies to AS/NZS 1801 standard
- HDPE strap & webbing clips with polyester webbing straps
- The Revolution wheel ratchet has deep nape strap that enables the firmest retention of any hard hat, with a simple turn fastening system.
- The full brim provides additional protection to the neck and ears against sun, glare, rain, snow and falling debris.
- Egyptian cotton core with porous PU coating for maximum sweat absorption. PH neutral, dermatologically tested.
- Logo printing is available on the front and sides of this hard hat. Minimum order quantities and set-up charges apply.
(0 reviews) -
Safety HelmetsPRO CHOICE EVO Alta Skyworker Vented Helmet with Wheel Ratchet
- Offering all-round impact protection, featuring a specialised shell structure and internal liner to increase durability and shock absorption performance.
- Certified to the EN 12492 mountaineering helmet standard with a 4-point chinstrap designed to stay secure under force, maximising security during a fall.
- Precise adjustment settings enable a secure fit, ensuring the helmet remains stable.
- Engineered to maximise compatibility and accessory integration, EVO ALTA is an adaptive system with built-in attachment points and an interchangeable front module.
- Providing all-round impact protection with top, side, front and rear shock absorption performance. The helmet is designed with an extended nape section to offer greater neck coverage.
- The EVO Alta range maximises compatibility and accessory integration. Attachment points on the helmet shell enable firm fitting of ear defenders, faceshields, goggle and lamp straps, plus a range of other accessories.
- The Revolution Flex wheel ratchet harness secures the helmet, eliminating pressure points to provide maximum comfort. Fitted with a replaceable Chamlon cotton sweatband and fully compatible with EVO cooling sweatbands for protection against heat stress.
- The 4-point chinstrap is easy to adjust. Size and anchorage point adjustment enable a tailored fit for different head sizes, ensuring stability and greater comfort.
- Side and rear ventilation in the helmet’s shell and liner reduce temperatures by an average of 2-3 degrees.
- Unique interchangeable front module fits the integrated ID card holder for on-site identification or the logo ready standard front to apply company branding. Both front modules enable attachment of a helmet lamp and other accessories.
- Featuring an internal impact liner to increase shock absorption and penetration protection. Manufactured in expanded polypropylene (EPP), the liner is lightweight and ventilated for comfort.
- The harness cradles the head to keep the helmet stable with an adjustable 4-point chinstrap for increased security. 3D-Adjustment depth settings enable the most precise fit attainable on a safety helmet.
- Helmets can be customised to meet a corporate identity. Logo printing is available on the front and sides of this safety helmet, helping to increase brand recognition and discourage theft. MOQs apply.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Safety HelmetsPRO CHOICE EVO Alta Skyworker Vented Safety Helmet with CR2 Reflective Kit
- The new EVO ALTA offers all-round impact protection. Featuring a specialised shell structure and internal liner to increase durability and shock absorption performance.
- Certified to the EN 12492 mountaineering helmet standard with a 4-point chinstrap designed to stay secure under force, maximising security during a fall.
- Precise adjustment settings enable a secure fit, ensuring the helmet remains stable.
- Engineered to maximise compatibility and accessory integration, EVO ALTA is an adaptive system with built-in attachment points and an interchangeable front module.
- Complies to EN 12492 and AS/NZS1801
- Providing all-round impact protection with top, side, front and rear shock absorption performance. The helmet is designed with an extended nape section to offer greater neck coverage.
- The EVO Alta range maximises compatibility and accessory integration. Attachment points on the helmet shell enable firm fitting of ear defenders, face shields, goggle and lamp straps, plus a range of other accessories.
- The Revolution Flex wheel ratchet harness secures the helmet, eliminating pressure points to provide maximum comfort. Fitted with a replaceable Chamlon cotton sweatband and fully compatible with EVO cooling sweatbands for protection against heat stress.
- The 4-point chinstrap is easy to adjust. Size and anchorage point adjustment enable a tailored fit for different head sizes, ensuring stability and greater comfort.
- Side and rear ventilation in the helmet’s shell and liner reduce temperatures by an average of 2-3 degrees.
- EVO ALTA features a unique interchangeable front module. Select the integrated ID card holder for on-site identification or choose the logo-ready standard front to apply company branding. Both front modules enable attachment of a helmet lamp and other accessories.
- Featuring an internal impact liner to increase shock absorption and penetration protection. Manufactured in expanded polypropylene (EPP), the liner is lightweight and ventilated for comfort.
- The harness cradles the head to keep the helmet stable with an adjustable 4-point chinstrap for increased security. 3D-Adjustment depth settings enable the most precise fit attainable on a safety helmet.
- Helmets can be customised to meet a corporate identity. Logo printing is available on the front and sides of this safety helmet, helping to increase brand recognition and discourage theft. MOQs apply.
- CR2 Reflective Decals add extra visibility making it easy to identify workers on site.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Safety HelmetsPRO CHOICE EVO Vista Lens White/Smoke Helmet – Wheel Ratchet – Clear Lens
- Next generation feature-rich safety helmet based on proven head protection technology.
- Incorporates a fully retractable optical class 1 integrated overspec, offering B-RATED impact protection even at extreme temperatures.
- The eyewear is easy to deploy, adjust and maintain, ensuring protection is on hand whenever required.
- Developed to seamlessly integrate with a wide range of above the neck PPE.
- Fitted with the Revolution Flex wheel ratchet harness, the helmet is designed to reduce pressure for the perfect fit and all-day comfort.
- Complies to AS/NZS 1801 and AS/NZS 1337.1
- The safety cell prevents ricocheting debris travelling up the eyewear and impacting the scalp. The eyewear cannot make contact with the scalp, preventing injury should the eyewear be forced back on to the safety cell.
- The Revolution Flex wheel ratchet harness eliminates pressure points for extreme comfort and features a Chamlon cotton sweatband.
- Specially engineered attachment points on the helmet enable secure fitting of an ID card holder. The clear polycarbonate holder uses a simple push and slide mechanism to fit a standard size business card.
- Helmets can be customised to meet a corporate identity. Company logos can be printed on the front and back of this safety helmet to improve brand recognition and discourage theft. MOQs apply
- Eye protection made with optical class 1 material for a panoramic view with minimal distortion. The integrated eyewear offers A-rated impact resistance and UV filtering, with anti-mist and anti-scratch coatings.
- Designed to maximise facial coverage while remaining compact to allow freedom of movement. The faceshield is fully adjustable, optimising protective coverage and compatibility with prescription spectacles
- Specifically designed to maximise compatibility with other JSP PPE, including the Force8 half mask with PressToCheck filters and the Sonis mounted ear defender range.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Safety HelmetsPRO CHOICE EVO Vista Shield White/Smoke Helmet – Wheel Ratchet – Clear Lens
- Next generation feature-rich safety helmet based on proven head protection technology.
- Incorporates a fully retractable optical class 1 integrated overspec, offering A-RATED impact protection even at extreme temperatures.
- The eyewear is easy to deploy, adjust and maintain, ensuring protection is on hand whenever required.
- Developed to seamlessly integrate with a wide range of above the neck PPE.
- Fitted with the Revolution Flex wheel ratchet harness, the helmet is designed to reduce pressure for the perfect fit and all-day comfort.
- Complies to AS/NZS 1801 and AS/NZS 1337.1
- The safety cell prevents ricocheting debris travelling up the eyewear and impacting the scalp. The eyewear cannot make contact with the scalp, preventing injury should the eyewear be forced back on to the safety cell.
- The Revolution Flex wheel ratchet harness eliminates pressure points for extreme comfort and features a Chamlon cotton sweatband.
- Specially engineered attachment points on the helmet enable secure fitting of an ID card holder. The clear polycarbonate holder uses a simple push and slide mechanism to fit a standard size business card.
- Helmets can be customised to meet a corporate identity. Company logos can be printed on the front and back of this safety helmet to improve brand recognition and discourage theft. MOQs apply
- Eye protection made with optical class 1 material for a panoramic view with minimal distortion. The integrated eyewear offers A-rated impact resistance and UV filtering, with anti-mist and anti-scratch coatings.
- Designed to maximise facial coverage while remaining compact to allow freedom of movement. The faceshield is fully adjustable, optimising protective coverage and compatibility with prescription spectacles
- Specifically designed to maximise compatibility with other JSP PPE, including the Force8 half mask with PressToCheck filters and the Sonis mounted ear defender range.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hard HatsPRO CHOICE EVO6161 Full Brim Vented Hard Hat White
- The EVO 6161 Full Brim Vented Hard Hat combines a super strong HDPE shell with the comfort benefits of the Evolution 3D-Adjustment harness system.
- Complies to AS/NZS 1801 standard
- Easy assembly kit is available separately for adding a clear or shaded polycarbonate retractable eyeshield to an existing EVO 6100 Full Brim Hard Hat.
- During testing the EVO 6100 proved far tougher than the standard required, delivering optimum performance in today’s advanced environment.
- A 6-point textile cradle suspension system and Chamlon sweatband offer unrivalled comfort.
- Side ventilation for optimum air movement inside the shell, reducing temperature inside the Hard Hat.
(0 reviews) -
BarriersPRO CHOICE Expandable Barrier Red/White
- Extends from 0.4m to 3.45m
- Additional barriers can be linked via connection arms to extend the length to be barricaded
- Set of 4 castor wheels included
- All steel, powder coated construction
(0 reviews) -
BarriersPRO CHOICE Expandable Barrier Yellow/Black
- Extends from 0.4m to 3.45m
- Additional barriers can be linked via connection arms to extend the length to be barricaded
- Set of 4 castor wheels included
- All steel, powder coated construction
(0 reviews) -
Disposable RespiratoryPRO CHOICE Filterspec Pro Goggle/Mask Combo P2+Valve+Carbon
- Optimal Fit, Breathing Resistance and Filtration
- Minimizes Lens Fogging due to seal created
- Fully adjustable strap to achieve the optimal fit & comfort
- Goggle Certified to AS/NZS1337.1:2010
- Fully adjustable strap to achieve the optimal fit & comfort
- Can be worn over most prescription eyewear
- Anti-Fog, Anti-Scratch, Medium Impact Protection Lens
- 5.5 base curve, one piece lens offers unobstructed viewing
(0 reviews) -
Vibration ReductionPRO CHOICE Flexi Vibration Glove
- Designed to reduce vibration transmission for slow to medium rotating tools (50 – 300 Hertz or 3000 – 18000 RPM).
- Suitable for reducing hand and arm vibration damage associated with continued exposure to vibrating equipment.
- Protection from long term effects of nerve damage by exposure to tools such as Chain Saws, Impactors, Tractor & Bob Cat operation, Lawn mowers, Hedgers, Blowers & Trimmers.
- Unique Supra Block vibration foam in Palm & base of Fingers, covered in micro-fibre with Silicon Grip material.
- Removable fingers for increased control.
- Vibration Reduction Palm conforms with ISO / EN10819:2013 TRM = 0.71, TRH = 0.53.
- Bio-degradable packaging
- Qty/Carton 24
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Protective HeadwearPRO CHOICE Flynet
- Heavy Duty Fly / Mosquito Head Net
- Fits over most headwear including hard hats
- Made from 100% Polyester
- Qty/Pack – 10
(0 reviews) -
Reusable RespiratoryPRO CHOICE Force Typhoon 10 Full Face Respirator
- An extremely lightweight, easy to maintain full face mask with panoramic visor.
- Conforms to AS/NZS 1716 and AS/NZS 1337.1
- The RX Modular Prescription Kit enables the use of corrective lenses, preventing traditional prescription spectacles interrupting the face seal and compromising protection.
- Low resistance exhalation valve for easy breathing, with stable mask configuration. Made from silicone it performs well at very low temperatures.
- Available in Small, Medium and Large to provide an even better fit to a wider range of face sizes and shapes improving the seal and level of protection.
- Fully compatible with both JSP Classic filters and PresstoCheck twin filter cartridges, providing daily face fit reassurance with the easiest way to check the seal each time the mask is donned. Fit it – Press it – Check it.
- Meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available.
- Using NIOSH (ISO16976-2) extensive research distinguishing the worlds most common facial shapes. JSP have digitally optimised the ergonomics of the Force10 Typhoon face seal to maximise wearer compatibility.
- Replaceable peel-off visor protectors are available to prolong the life of the Force10 Typhoon.
- Comfort is a key feature of this ultra lightweight mask, the web like structure of the harness cradles the users head – ensuring wearer comfort throughout the working day.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reusable RespiratoryPRO CHOICE Force Typhoon 8 Half Mask Respirator Asbestos/Silica/Dust Kit with P2 Filters
- The Force Typhoon 8 twin cartridge half mask with Typhoon valve offers superior low breathing resistance and incorporates a 4-point suspension harness with quick release buckles.
- PressToCheck is the easiest way to face-fit check the seal of your respirator, every time you put it on! F-4003 P2 dust encapsulated filters feature HEPA filtration exceeding 99.97%, Low profile design maximising compatibility and low breathing resistance.
- Complies to AS/NZS 1716
- Durable thermoplastic rubber mask with fully adjustable 4-point cradle suspension ensuring an effective facial fit.
- The low-profile, swept-back design enables excellent visibility, allowing filters to be worn effectively behind all types of faceshield and welding visor.
- The Force Typhoon 8 half mask has been meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available if necessary.
- Low resistance exhalation valve for easy breathing. Made from silicone it performs well at very low temperatures.
- PressToCheck encapsulated filters offer ultimate longevity – the durable design makes the filters easy to clean and reuse. Correct cleaning, maintenance and storage increases the useful life of the product.
- Kit includes: 1 x Force Typhoon 8 Half Mask Respirator Medium BHT003-0L5-0AN, 2 x PressToCheck P2 Dust Filters BMN990-001-7AN and 5 Sanitary Wipes.
(0 reviews) -
Reusable RespiratoryPRO CHOICE Force Typhoon 8 Half Mask Respirator Multi-Gas Kit with ABEK1P2 Filters
- The Force Typhoon 8 twin cartridge half mask with Typhoon valve offers superior low breathing resistance and incorporates a 4-point suspension harness with quick release buckles.
- PressToCheck is the easiest way to face-fit check the seal of your respirator, every time you put it on! F-4713 ABEK1P2 multi- gas / vapour + dust replacement encapsulated filters feature HEPA filtration exceeding 99.97%, Low profile design maximising compatibility and low breathing resistance.
- Complies to AS/NZS 1716
- Durable thermoplastic rubber mask with fully adjustable 4-point cradle suspension ensuring an effective facial fit.
- The low-profile, swept-back design enables excellent visibility, allowing filters to be worn effectively behind all types of faceshield and welding visor.
- The Force Typhoon 8 half mask has been meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available if necessary.
- Low resistance exhalation valve for easy breathing. Made from silicone it performs well at very low temperatures.
- PressToCheck encapsulated filters offer ultimate longevity – the durable design makes the filters easy to clean and reuse. Correct cleaning, maintenance and storage increases the useful life of the product.
- Kit includes: 1 x Force Typhoon 8 Half Mask Respirator Medium BHT003-0L5-0AN, 2 x ABEK1P2 multi- gas / vapour / dust replacement encapsulated filters BMN750-000-6AN and 5 Sanitary Wipes
(0 reviews) -
Reusable RespiratoryPRO CHOICE Force Typhoon 8 Half Mask Respirator Only
- Twin cartridge half mask with Typhoon valve offers superior low breathing resistance and a 4-point suspension harness with quick release buckles.
- The mask accepts the full range of Force filters including PressToCheck, providing protection against particulates, many gases and vapours.
- Conforms to AS/NZS 1716
- Durable thermoplastic rubber mask available in four sizes for superior fit to most face shapes. Fully adjustable 4-point cradle suspension ensuring an effective facial fit.
- The low-profile, swept-back design enables excellent visibility, allowing filters to be worn effectively behind all types of faceshield and welding visor.
- Meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available if necessary.
- Low resistance exhalation valve for easy breathing. Made from silicone it performs well at very low temperatures.
- Fully compatible with PressToCheck twin filter cartridges, providing daily face fit reassurance with the easiest way to check the seal each time the mask is donned. Fit it – Press it – Check it.
- Available in Small, Medium, Large and Short/Wide to provide an even better fit to a wider range of face sizes and shapes improving the seal and level of protection.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Reusable RespiratoryPRO CHOICE Force Typhoon 8 Half Mask Respirator Pack with A2P2 Filters
- The Force Typhoon 8 twin cartridge half mask with Typhoon valve offers superior low breathing resistance and incorporates a 4-point suspension harness with quick release buckles.
- PressToCheck is the easiest way to face-fit check the seal of your respirator, every time you put it on! F-4123 A2P2 organic gas / vapour + dust replacement encapsulated filters feature HEPA filtration exceeding 99.97%, Low profile design maximising compatibility and low breathing resistance.
- Complies to AS/NZS 1716
- Durable thermoplastic rubber mask with fully adjustable 4-point cradle suspension ensuring an effective facial fit.
- The low-profile, swept-back design enables excellent visibility, allowing filters to be worn effectively behind all types of faceshield and welding visor.
- The Force Typhoon 8 half mask has been meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available if necessary.
- Low resistance exhalation valve for easy breathing. Made from silicone it performs well at very low temperatures.
- PressToCheck encapsulated filters offer ultimate longevity – the durable design makes the filters easy to clean and reuse. Correct cleaning, maintenance and storage increases the useful life of the product.
- Kit includes: 1 x Force Typhoon 8 Half Mask Respirator Medium BHT003-0L5-0AN and 2 x A2P2 organic gas / vapour / dust replacement encapsulated filters BMN740-000-6AN
(0 reviews) -
Reusable RespiratoryPRO CHOICE Force Typhoon 8 Half Mask Respirator Pack with ABEK 1P2 Filters
- The Force Typhoon 8 twin cartridge half mask with Typhoon valve offers superior low breathing resistance and incorporates a 4-point suspension harness with quick release buckles.
- PressToCheck is the easiest way to face-fit check the seal of your respirator, every time you put it on! F-4713 ABEK1P2 multi- gas / vapour + dust replacement encapsulated filters feature HEPA filtration exceeding 99.97%, Low profile design maximising compatibility and low breathing resistance.
- Complies to AS/NZS 1716
- Durable thermoplastic rubber mask with fully adjustable 4-point cradle suspension ensuring an effective facial fit.
- The low-profile, swept-back design enables excellent visibility, allowing filters to be worn effectively behind all types of faceshield and welding visor.
- The Force Typhoon 8 half mask has been meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available if necessary.
- Low resistance exhalation valve for easy breathing. Made from silicone it performs well at very low temperatures.
- PressToCheck encapsulated filters offer ultimate longevity – the durable design makes the filters easy to clean and reuse. Correct cleaning, maintenance and storage increases the useful life of the product.
- Kit includes: 1 x Force Typhoon 8 Half Mask Respirator Medium BHT003-0L5-0AN and 2 x ABEK1P2 multi- gas / vapour / dust replacement encapsulated filters BMN750-000-6AN
(0 reviews) -
Reusable RespiratoryPRO CHOICE Force Typhoon 8 Half Mask Respirator Pack with P2 Filters
- The Force Typhoon 8 twin cartridge half mask with Typhoon valve offers superior low breathing resistance and incorporates a 4-point suspension harness with quick release buckles.
- PressToCheck is the easiest way to face-fit check the seal of your respirator, every time you put it on! F-4003 P2 dust encapsulated filters feature HEPA filtration exceeding 99.97%, Low profile design maximising compatibility and low breathing resistance.
- Complies to AS/NZS 1716
- Durable thermoplastic rubber mask with fully adjustable 4-point cradle suspension ensuring an effective facial fit.
- The low-profile, swept-back design enables excellent visibility, allowing filters to be worn effectively behind all types of faceshield and welding visor.
- The Force Typhoon 8 half mask has been meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available if necessary.
- Low resistance exhalation valve for easy breathing. Made from silicone it performs well at very low temperatures.
- PressToCheck encapsulated filters offer ultimate longevity – the durable design makes the filters easy to clean and reuse. Correct cleaning, maintenance and storage increases the useful life of the product.
- Kit includes: 1 x Force Typhoon 8 Half Mask Respirator Medium BHT003-0L5-0AN and 2 x PressToCheck P2 Dust Filters BMN990-001-7AN.
(0 reviews) -
Reusable RespiratoryPRO CHOICE Force Typhoon 8 Half Mask Respirator Spray Painters Kit with A2P2 Filters
- The Force Typhoon 8 twin cartridge half mask with Typhoon valve offers superior low breathing resistance and incorporates a 4-point suspension harness with quick release buckles.
- PressToCheck is the easiest way to face-fit check the seal of your respirator, every time you put it on! F-4123 A2P2 organic gas / vapour + dust replacement encapsulated filters feature HEPA filtration exceeding 99.97%, Low profile design maximising compatibility and low breathing resistance.
- Complies to AS/NZS 1716
- Durable thermoplastic rubber mask with fully adjustable 4-point cradle suspension ensuring an effective facial fit.
- The low-profile, swept-back design enables excellent visibility, allowing filters to be worn effectively behind all types of faceshield and welding visor.
- The Force Typhoon 8 half mask has been meticulously engineered to incorporate a small number of key components. Disassembly, cleaning and maintenance are effortless with replacement parts available if necessary.
- Low resistance exhalation valve for easy breathing. Made from silicone it performs well at very low temperatures.
- PressToCheck encapsulated filters offer ultimate longevity – the durable design makes the filters easy to clean and reuse. Correct cleaning, maintenance and storage increases the useful life of the product.
- Kit includes: 1 x Force Typhoon 8 Half Mask Respirator Medium BHT003-0L5-0AN, 2 x A2P2 organic gas / vapour / dust replacement encapsulated filters BMN740-000-6AN and 5 Sanitary Wipes
(0 reviews) -
Safety GlassesPRO CHOICE Frontside Polarised Safety Glasses
- Certified to AS/NZS 1337.1:2010 Personal Eye Protection
- Medium impact rated
- Our FRONTSIDE TR90 Frame is extremely comfortable to wear. Highly flexible, they can bend under pressure which makes them resilient to damage
- AQUASHIELD Permanent Hydrophilic anti-fog lens coatings
- Flexible arms ensure Low Clamp force reducing Temporal pressure coupled with clear side shield for increased lateral eye protection and enhanced peripheral vision
- UV400 – 100% UV Protection (tinted lens)
- Low profile arm to aid in use with other PPE
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Safety GlassesPRO CHOICE Frontside Safety Glasses
- Certified to AS/NZS 1337.1:2010 Personal Eye Protection
- Medium impact rated
- Our FRONTSIDE TR90 Frame is extremely comfortable to wear. Highly flexible, they can bend under pressure which makes them resilient to damage
- AQUASHIELD Permanent Hydrophilic anti-fog lens coatings
- Flexible arms ensure Low Clamp force reducing Temporal pressure coupled with clear side shield for increased lateral eye protection and enhanced peripheral vision
- Low profile arm to aid in use with other PPE
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Safety GlassesPRO CHOICE Futura Safety Glasses
- Certified to AS/NZS 1337.1:2010
- Medium impact
- 99.9% UV protection
- Anti-fog, anti-scratch lens
- Soft, rubber tip arms
- Comfortable Silicone nose piece
- Ultra lightweight for enhanced user comfort during extended wear
- Qty/Box – 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Synthetic Dipped RangePRO CHOICE G-Tek 13G Black Nylon GP Palm Dip Glove
- G-Tek Seamless Knit Nylon Blend Glove with Polyurethane Coated Flat Grip on Palm and Fingers.
- Seamless knit 13 gauge nylon shell offers increased comfort, finger dexterity and breathability.
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling.
- Knit Wrist helps prevent dirt and debris from entering the glove.
- Breathable back for comfort.
- Touchscreen compatible which allows the wearer to operate touch screen devices without having to remove gloves.
- Silicone free
- Eco-friendly FSC paper packaging that is vend-ready
- Available in sizes 7 – 12
- Pack/Qty 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Synthetic Dipped RangePRO CHOICE G-Tek 13G Hi-Viz Yellow GP Palm Dip Glove
- G-Tek Hi-Vis Seamless Knit Polyester Glove with Hi-Vis Polyurethane Coated Flat Grip on Palm and Fingers.
- Seamless knit 13 gauge polyester shell offers increased comfort, finger dexterity and breathability.
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling.
- Hi-vis yellow colouring allows maximum visibility in varying conditions.
- Knit wrist helps prevent dirt and debris from entering the glove.
- Silicone free.
- Eco-friendly FSC paper packaging that is vend-ready
- Available in sizes 7 – 12
- Pack/Qty 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Synthetic Dipped RangePRO CHOICE G-Tek Blue Poly GP Double Dip Latex Glove
- G-Tek Seamless Knit Polyester Glove with Double Dipped Latex MicroSurface Grip – Allowing optimal performance and protection in wet conditions.
- Seamless knit 13 gauge polyester shell offers increased comfort and dexterity.
- Fully coated to keep hands dry and water out.
- Latex MicroSurface coatings are impermeable providing an elevated grip in dry and oily conditions, infused with thousands of tiny suction cup pockets that create a vacuum effect that dispenses fluids away.
- Knit wrist helps prevent dirt and debris from entering the glove.
- Color coded hems for easy size identification
- Eco-friendly FSC paper packaging that is vend-ready
- Available in sizes 7 – 12
- Pack/Qty 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cut Resistant RangePRO CHOICE G-Tek Cut 5 Hi Vis Gloves
- Cut Level 5 / C protection close fitting liner minimising any hand fatigue or resistance of movement for all day wear.
- Fully breathable micro-porous coating on Hi Vis HPPE / Glass fibre seamless knit 15 gauge liner.
- Anti Microbal treated liner for hygiene and reduced bacteria odour.
- Amazing dexterity and sensitivity from Skin Contouring seamless knit liner combined with unique GuardTek coating.
- High water vapour transmission keeps hands Cool & Dry.
- Hi Vis Yellow Liner for maximum visibility and safety.
- Qty/Pack 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cut Resistant RangePRO CHOICE G-Tek Forceshield Polykor X7 Glove
- High Dexterity gloves designed to provide heavy duty protection with absolute Minimal restriction of touch sensitivity and all shift long comfort.
- High level E Cut Resistant protection glove manufactured from ultrafine PolyKor X7.
- High Visibility design coated with Nitrile for Wet Grip performance.
- Heavy Duty ANSI / ISEA 138 Impact Level 2 Protection, with back of hand crush, pinch and impact protection built into the dorsal and fingers of the glove.
- Touch Screen Functionality
- Hygienically Sanitised
- UPF 50+ Protection
- Reinforced thumb crotch area.
- Qty/Pack 6
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cut Resistant RangePRO CHOICE G-Tek Polykor Barehand Blended Cut E Glove
- G-Tek PolyKor BareHand Blended gloves designed for heavy cut resistance with an EN388 Cut Rating Level E.
- 21 gauge PolyKor BareHand lightweight soft feel shell provides excellent dexterity and tactile sensitivity.
- Seamless construction offers increased comfort and breathability.
- Ultra-thin foam nitrile palm coating, black nitrile reinforce thumb crotch.
- Touchscreen compatibility.
- Available in sizes 6 – 12
- Qty/Pack 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cut Resistant RangePRO CHOICE G-Tek Polykor Barehand Cut D Glove
- G-Tek PolyKor BareHand gloves provide a medium high cut resistant EN388 Cut Level D Protection.
- Seamless Knit PolyKor Blended Glove with Polyurethane Coated Flat Grip on Palm and Fingers – 21 Gauge – Touchscreen Compatible.
- Seamless construction offers increased comfort and breathability.
- Premium PolyKor blended 21G shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance.
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling.
- Reinforced thumb crotch provides longer wear life and increased protection.
- Knit wrist helps prevent dirt and debris from entering the glove.
- Washable, resistant to chemicals, water, and ultraviolet light.
- Qty/Pack 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cut Resistant RangePRO CHOICE G-Tek Polykor Cut C Glove
- Cut rating level C for light to medium Cut Hazard Risks.
- Seamless 13 gauge PolyKor liner offers increased comfort and breathability.
- Lightweight PolyKor soft feel shell provides dexterity, tactile sensitivity and cut resistance.
- Nitrile micro-surface coat provides excellent abrasion resistance + extends the life of the glove.
- Knit wrist helps prevent dirt and debris from entering the glove.
- Qty/Pack 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cut Resistant RangePRO CHOICE G-Tek Polykor X7 Cut C Dual Coat Glove
- Double Dipped Full Nitrile coating with Palm Micro-surface for improved Wet / Oily Grip.
- PolyKor X7 technology provides High Cut Resistance with Durability and Dexterity for precise fingertip grip and control.
- EN388:2016 Cut Level C / ANSI A3 protection rating.
- Hands remain Safe and Dry with no contamination contact by Liquids or Oils.
- Touch Screen Functionality with gloves on.
- Sanitized for Hygiene.
- UPF 50+ Ultra Violet resistant.
- Qty/Pack 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cut Resistant RangePRO CHOICE G-Tek Polykor X7 Cut D Glove
- Cut Level D protection from 18 gauge PolyKor X7 liner, minimising hand fatigue or resistance of movement for all day wear.
- Fully breathable Neo Foam micro-porous coating, with high water vapour transmission keeps hands Cool & Dry.
- Anti Microbial treated liner for extra protection.
- Amazing dexterity and sensitivity from ultra thin flexible 18 gauge seamless knit liner.
- Touch Screen Compatible for digital functionality.
- UPF 50+
- Reinforced Thumb Crotch via Vulcanised Nitrile pad.
- Qty/Pack 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
